NEW
Font size
WorksheetsPRICON Mid-Term Exam
Total questions: 25
Worksheet time: 6hrs 15mins
What does OSHA mean?
A. Occupational Safety and Health Administration
B. Organization of Saftey and Health Association
C. Organization of Securtiy and Hazard Association
D. None of the above
What jobs listed below are construction jobs?
A. Plumber
B. Carpenter
C. Doctor
D. A and B
What is a layout tape measure used for?
A. Drawing
B. Hammering
C. Measuring
D. None of the above
Which type of saw is used for making internal cuts in drywall?
A. Utility Drywall Saw
B. Dovetail Saw
C. Keyhole Saw
D. Hacksaw
A Utility Knife is used for cutting what type of materials?
A. Roof Shingles
B. Tarpaper
C. Wood Veneer
D. All of the above
Which tool or tools are used for pulling nails?
A. Rip Hammer
B. Claw Hammer
C. Sledge Hammer
D. A and B
Which of the following is NOT a commonly known screwdriver?
A. Phillips Head Screwdriver
B. Hex Torque Screwdriver
C. Flat Head Screwdriver
D. Allen Key Screwdriver
What does PPE stand for?
A. Private Protection Equipment
B. Personal Protection Equipment
C. Personal Private Equipment
D. Private Personal Equipment
What is another name for Vice Grips?
A. Locking Pliers
B. Socket Wrench
C. Monkey Wrench
D. None of the above
Which PPE should be worn when using a Power Tool?
A. Ear Plugs
B. Safety Glasses
C. Face Mask
D. All of the above
Where should you stand when using a Circular Saw?
A. Behind the saw
B. To the Right of the saw
C. To the Left of the saw
D. In Front of the saw
What type of materials can a circular saw cut?
A. Wood
B. Metal
C. Masonry
D. All of the above
When using a circular saw, what should you do with a 2x4 that cannot be held safely?
A. Use a clamp to hold it down
B. Do not cut it
C. Use a magnet to help hold it
D. Use rope to make a knot
What do you use to push the board while making a Rip cut?
A. Your hand
B. Push stick
C. A Ruler
D. A Level
You can use a Rip fence and a Miter fence at the same time?
A.True
B. False
What prevents kickback on a table saw?
A. Saw Guard
B. Rip Guard
C. Rip Blade
D. All of the above
When changing blades on a circular saw, you should first?
A. Unplug the saw
B. Remove the arbor nut
C. Remove the guard
D. Check the saw teeth direction
Which saw is the most common table saw found on a job site?
A. Open Base Saw
B. Miter Saw
C. Rip Saw
D. All of the above
A miter saw can cut up to what angle?
A. 35 Degrees
B. 90 Degrees
C. 45 Degrees
D. 180 Degrees
When you finish cutting with a Miter saw, you should first?
A. Turn the power switch off
B. Return the saw head behind the fence
C. Hold the saw still and wait until it stops
D. Keep your eye on the materia
What kind of blade does a Jigsaw use to cut?
A. S-Shank Blade
B. T-Shank Blade
C. Circular Blade
D. None of the above
When using a Reciprocal saw you should always two hands?
A. True
B. False
When cutting with a Jigsaw, the part of the saw that should be kept firmly against the material is the?
A. Baseplate
B. Guard
C. Housing
D. Front of the saw.
When do hardwoods shed their leaves?
A. Winter
B. Fall
C. Summer
D. At the end of the growing season
What is the standard size of a Plywood panel, what feet by what feet?
A. 10X12
B. 4X8
C. 6X10
D. None of the above
