1.     You are not required to operate any power machines in the wood shop in order to earn credit for this class.  You may do the work with _____________________.

You will not be given permission to operate any machine until you have:  passed a test on the general safety instructions of that machine, understand the safe operation of that machine, and been given a demonstration by the instructor on that machine.

All students should be aware of the fire _________________________.

All flammable liquids should be stored in __________________________________.

Only use toxic chemicals in ____________________________________.

Put all used or oily rags in __________________________.

__________________________ should be used only when necessary and with extreme caution.

You must report all accidents to _______________________ immediately.

You must use _________________________ whenever there is danger of anything getting in your eyes.

You must have all loose clothing _________________________ before operating any machine.  All loose jewelry including rings must also be removed.

_______________________ are provided for dusty or toxic air conditions, such as spray finishing.

Do not lift heavy objects beyond your strength.  Use your legs to lift and ask________________________ for help.

Never carry nails, screws or other objects in your ___________________.

You must _________________ run, or horseplay in the wood shop.

You must never ____________ anything in the wood shop.

If you spill anything, clean up the area _______________________.

You should never leave any tools or material of any kind laying on the _________________.

Return all tools you are finished with or not using to the __________________.

Carry tools to that the sharp edges are pointed _________________________.

If you find a _______________________ report it to Mr. Kamanga immediately.  Never use it in that condition, you could get hurt or hurt someone else.

Do not use any machine or tools on any _______________________.

Always ______________ any machine before leaving it, even if you leave it for a brief second.

     _______________________ any machine which you think is not operating properly and report it to Mr. Kamanga immediately.

You _____________________ annoy or distract anyone operating a power machine or tool.

You must keep all _____________________ in place while the machine is running.

All cleaning, oiling and adjusting of any machine must only be done while the machine is ____________________.

Be sure all moveable machine parts are ______________________ before the power is turned on.

All tools must be removed from a machine __________________ the power is turned on.

All special set-ups must be approved ______________________ before the machine is used.

When you are finished using a special set-up, remove attachments and adjust the machine for _______________________.

_______________________ all machines when you are through using them.

Never use a file unless it is equipped with a _______________.

You should never strike a file against ______________________.  Clean it with a file brush.

Do not use a hammer with a ___________________.

_____________________ strike two hammer faces together.

Never _________________ on a machine unless you are going to use it.

You must never __________________ a machine for another person.

Make all measurements on your work while the machine is at ___________________________.  Measuring tools caught in running machines can

Do not ________________________ any machine that is in motion.  You may be caught in some of the moving parts.

Long pieces of material should be carried by having a student ___________________.

________________ all portable electric hand tools before you do any blade changing or adjusting of the machine.

Always remove nails, screws and ___________________ from your wood before storing or using it.

Never hold material in your ___________ while cutting with a knife or chisel.

Always stand on the floor, not on a bench, stool or chair when working on ____________________.

Observe minimum recommended material sizes for __________________.

Always wait for a machine to achieve _________________ before you try to cut your material.

Mr. Kamanga needs to approve your procedure _________________ you begin to cut your material.

Make sure long hair is _______________ before beginning to work in the wood shop.  You may be seriously injured if your hair gets caught in a machine.

Removal of abrasive dust must be done with ___________________________.