WorksheetsSimulation Inventor
Total questions: 30
Worksheet time: 52mins
Open reset front.ipt
- reset front on the view cube
- change the view into the left view
what word appears on the display?
Bawah
Kanan
Kiri
Serong Depan
Serong Belakang
Open sketch1.ipt
Activate Sketch1.
- Apply the radius dimensions as shown.
- Apply the linear dimensions as shown.
- With the sketch active, click the inspect tab.
- On the Measure panel, use the Region Properties tool to calculate the area of the area of the sketch.
What is the area, in square millimeters? ###.### mm2
(a)
Open extrude1.ipt
Active Sketch1.
- Apply a 20 diameter dimension
- Apply the 6 and 4 linear dimensions
- In the positive Z direction. extrude the sketch 10 mm. Add a 8 degree taper angle
- In the negative Z direction. extrude the sketch 5 mm. Add a -20 degree taper angle
What is the mass the part, in grams? ## grams
(a)
Open half circle.ipt
Active Sketch1.
- Apply a 24 radius dimension as shown
- Revolve the sketch as described
What is the volume of the part, in cubic millimeters? #####.## mm3
(a)
To create a solid model by giving depth to a 2D profile, use the __________ command.
Circle
Line
Extrude
Rectangle
Arc
In Autodesk Inventor, which tools can you use to view your design from any angle? *Chooses 2 or more answer
Revolve
Orbit
View Cube
Finish Sketch
Dimension
What should you press if you want to exit a command in Inventor?
Exit
Delete
Enter
Escape
Space
Which file type is used to create a new part?
Standard.iam
Standard.idw
Standard.ipn
Standard.ipt
Standard.dwg
Which navigation tool allows for lateral movement (left, right, up, or down) within the graphics window?
zoom
pan
scale
rotate
Look At
When the cursor moves over an endpoint or midpoint of an object, Inventor® informs you by displaying a _________.
blue X
green dot
red rectangle
blue square
red X
Which of the following options are available when launching a new project? *Chooses 2 or more answers
New Single User Project
New Vault Project
New Group Project
New Multiple User Project
New Project From Template
Open shaft1.ipt
- Apply fillet the angle as shown 4 mm.
- change the material into stainless steel
What is the mass the part, in grams? #### grams
(a)
open gear.ipt
suppress the features selected as shown
What is the volume of the part, in cubic millimeters? ##.### mm3
(a)
Open loft.ipt
- Turn on visibility for Work Plane 3
- Create a sketch plane on Work Plane 3
- Project the geometry where the part and work plane intersect
- Measure the sketch has been created
What is the area, in square millimeters?
(a)
What allows you to reuse Sketch1 to create the two different features as shown?
Project Geometry
Share Sketch
Copy and Paste
Redefine Sketch
Insert Sketch
Open shaft assy.dwg
Add a balloon tho the selected part as shown
What number is assigned to the part when a Structured BOM view is used? #
(a)
Create new drawing
- add a second sheet to the drawing file
- After adding the second sheet, change the sheet size from A3 to A2
- with sheet: 2 active, create another new sheet
What is the size for the new sheet?
A1
A2
A3
A4
A5
Open sweep.ipt
Add shell feature to the part with a thickness of 0,5 mm
- Remove the face and the end of the pipe
- Create the shell feature so the external dimensions remain the same
What is the volume of the part, in grams? ###.### grams
(a)
Open pin.ipt
- Edit revolve Sketch1 around the center line 270 degrees
What is the mass of the part in grams? #### grams
(a)
What is the primary purpose of presentation files?
To create exploded assembly files
To create holes and threads
To create a shrink wrap component
To create a weldment assembly
To create assembly into drawing
Open shaft assy.dwg
Edit Sheet: 1 in the browser to change the sheet from A2 to A1 size.
What is default width of the sheet, as shown in the Edit Sheet dialog box? ###.###
(a)
If a free part is applied in assembly, what are the remaining degree of freedom? # just the number
(a)
Open link.ipt
- Create a circular pattern consisting of both Hole and Chamfer
- for Occurrence Count. Enter 7
- Suppress the tapped hole that interferes with the guide pin feature
What is the mass of the part, in grams? ####.### grams
(a)
Open step-seal.idw
- Create a patterned circular centerline for the 6 evenly spaced holes in front view, as shown
- Place a dimension 2 on the hole circle, as shown
What is the value of dimension 2? ##.##
(a)
Open pump-cover.ipt
Change number of ribs on the existing part from 4 to 8
What is the mass of the completed part, in kilograms? ##.### kg
(a)
Open shaft assy.dwg
What is the material of the part as shown?
Stainless Steel
Iron Cast
Steel, Mild
Aliminium
Silver
Open guide.ipt
Place a through countersink hole 1 centered on the face as shown
- Countersink Diameter 15 mm
- Countersink Angle 45 degrees
- Hole Diameter 8 mm
- Termination 'Through All'
What is the mass of the part, in kilograms? #.### kg
(a)
When you place a component into an assembly while grounding the component to origin, what are the remaining degrees of freedom? #
(a)
Which features listed in the browser have the visibility toggled off? *2 or more answer
Extrusion 2 and Work Plane 1
Sketch 7 and Work Plane 1
Work Plane 1 and Fillet 3
Circular Pattern 3 and Sketch 13
Sketch 13 and Sketch 7
Open flens.dwg
- Create a patterned circular centerline for the holes as shown
- Place a diameter dimension on the hole circle centerline, as shown
What is the value of dimension? ###.##
(a)
