The most common practical unit of scenery is the:

One of the most common ways to leg upa platform is to use:

Cut 6 legs to the height of your platform, minus _____ inch to allow for the plywood top.

C-Clamp and drill holes for ____ legs to stand up a standard 4 by 8 foot platform.

After you drill the holes, set the bolts using a __________

If the legs are over 16 inches tall, it is a good idea to plumb the legs and apply 2 extra _________ to each leg.

___________ legs, a type of compression legging, are 2/4 legs that are nails or screws together in a L shape and sit directly under the platform bracing.

Wagons that go on and off stage in a fixed line need ______________.

A wagon that turns in a circle is called a ______________.

A wagon that has to maneuver in different directions needs __________.

Make sure to keep the casters close to, but not touching the wagon's ________________

Install casters using ___________ that are just long enough to go through the plywood top of a wagon and the caster base, and add 1/2 inch to allow for the washer and hex nut to be installed.

Mark where you need to drill, and make sure you remove the _______ before you drill. If you don't, it can spin and cause a pretty serious injury.

A ___________ is the long diagonal 2 inch by 12 inch part of stairs that are notched.

The ____________ is the part of the stairs that you walk on.

The height of the steps we use on stage is usually: ______________

The ____________ is the vertical part that connects tread to tread.

The depth of a standard tread is usually: ______________

If you are in doubt about how to do something: _____________