wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

UCE1603 - Unit I - Pop-Quiz

Total questions: 16

Worksheet time: 9mins

Name
Class
Date
1.

Which among the following is the most accessible road?

a)

Village Road

b)

Major District Road

c)

State Highway

d)

Expressway

2.

Obligatory points are ________.

a)

Control points through which the road should pass

b)

Control points through which the road should not pass

c)

Control points through which the road should and should not pass

d)

Control points that improve aesthetics of the road

3.

Which among the following is the primary soil investigation test for a rigid

highway pavement?

a)

UCC test

b)

SPT

c)

CBR test

d)

DCP test

4.

John Macadam’s method of road construction involved use of ________.

a)

Large boulders

b)

Rounded aggregates

c)

Small angular aggregates

d)

Soft aggregates

5.

The road-effect zone in ‘road-ecology’ is ________.

a)

The distance from the edge of the road over which significant ecological

effects can be detected

b)

The length of the road passing through an animal habitat

c)

The distance from the centre-line of the road, on either side, which is

acquired for highway development

d)

The width of the road including the shoulder and longitudinal drains

6.

Which twenty-year road plan classified highways into primary secondary

and tertiary classes, based on their level of importance?

a)

Vision 2021 (2001-2021)

b)

Lucknow road plan (1981-2001)

c)

Bombay road plan (1961-1981)

d)

Nagpur road plan (1943-1963)

7.

That part of the road-way which supports the vehicular traffic is ________.

a)

Carriage-way

b)

Right-of-way

c)

Road boundary

d)

Control width

8.

The bulk of the engineering survey work for planning the highway alignment is done in which stage of survey?

a)

Construction survey

b)

Preliminary survey

c)

Field Reconnaissance

d)

Final location survey

9.

The highway alignment is generally not straight for long stretches, slight alignment deviations are incorporated. Why?

a)

For aesthetic purposes

b)

To keep drivers alert by breaking monotony

c)

To minimize cost of construction

d)

For geometry purposes

10.

Which among the following is the primary soil investigation test for a flexible highway pavement?

a)

UCC test

b)

SPT

c)

CBR test

d)

DCP test

11.

Ribbon development with respect to highways refers to ________.

a)

Building of houses along the length of the highway, on either side

b)

Circuitous routing of the highway

c)

Afforestation along the length of the highway, on either side

d)

Constructing thin pavement layers

12.

Primary system of roads, as per the Lucknow road development plan (1981-2001) consists of?

a)

Expressways

b)

National Highways

c)

National Highways & State Highways

d)

National Highways & Expressways

13.

Width of pavement plus width of shoulders on either side is ________.

a)

Carriage-way

b)

Road-way

c)

Right-of-way

d)

Control width

14.

IRC specifies minimum ________ width for single lane of highway pavement.

a)

2.75 m

b)

3.75 m

c)

4.75 m

d)

5.75 m

15.

This is a picture of NH66 in Trivandrum.

The highway is ________.

a)

4 lane single carriageway with access-controlled frontage roads

b)

4 lane dual carriageway with access-controlled frontage roads

c)

8 lane single carriageway

d)

8 lane dual carriageway

16.

This is a picture of NH38 in Villupuram district.

The highway is ________.

a)

4 lane single carriageway in cutting

b)

4 lane dual carriageway in cutting

c)

4 lane single carriageway in embankment

d)

4 lane dual carriageway in embankment