It is a measuring instrument consisting of a thin strip of wood, metal or plastic that has a straight edge and length measurements makings along the edge.

It is a three-sided ruler, which typically has two equal sides meeting at a 90 degree angle and to a third side at 45, 30, including 60 degree angles.

This drawing instrument is used when drawing arcs and circles.

This is used for fastening the drawing paper on the drawing table or drawing board because it does not damage the board and it will not damage the paper if it is removed by pulling it off.

It is use to sharpen the pencil

This is one of the most important tools in drawing

It is a type of drawing pencil that used where extreme accuracy is required especially working on graphs, diagrams and charts.

A drawing instrument used when making horizontal lines. It is also used for guiding triangles when drawing vertical lines

It is a three-sided ruler.

It is used when transferring measurements, dividing lines and arcs into the desired number of equal parts. It can easily transfer accurate measurements by adjusting the divider points.

A semi-circular instrument divided into 180 equal parts, each of which is called degree.

It is the thick dark solid lines that are used on drawings to indicate the edges and details of an object.

Thin and dark lines use to show the size (span) of and object with a numeric value. Usually terminates with arrowheads

Short dash lines use to show non visible surfaces. Usually shows as medium thickness.

Thin and dark line use to show the starting and ending of dimension.

An extra thick lines use to show cutaway views or plane of projection where a section view is taken.

Short and long medium line use to show cutaway view of a long section.

Medium line with arrowhead to show notes or label for size or special information about a feature.

Long line followed by two short dashes use to show alternate position of a moving part.

Medium lines drawn at 45 degrees use to show interior view of solid areas of cutting plane line.

It is the ‘talk’ of a drawing.”

1. Use guidelines Minimum size of _____.

Space between words should equal the approximate width of the letter ____.

Vertical guidelines aid the eye in keeping letters from ________.

The letters in this name are exclusively six units wide meaning they are as wide as tall

Letter ___is the widest in the alphabet ( 8 units wider than its height)

If they are inclined, they are called Inclined Letters or __________.

ANSI stands for?

The most important aspect of ___________ is making a uniform dense black line by applying adequate pressure on the pencil