Identify the brake system that uses a metal band lined with friction material.

Scrub brakes use leverage to force a ________ against one or more wheels.

Tech A states that in the Traction Control System, the control unit can independently apply individual brake units even though the driver is not stepping down on the brake pedal. Tech B states that this function can also be carried out by the driver in manual mode. Who is correct?

A full brake-by-wire system does away with the hydraulic portion of the brake system and replaces it with all of the following EXCEPT:

A regenerative braking system uses ________ to slow the vehicle during braking.

Static friction is resistance between nonmoving surfaces and is present in which type of brakes?

The rotational force found in a moving vehicle tends to:

The master cylinder converts the brake pedal force into hydraulic pressure, which is then transmitted_______ via the brake lines and hoses to one or two wheel cylinders at each drum brake assembly.

A tires composition, tread style, tread condition, and inflation pressure all affect its traction.

Technician A says that in disc brake calipers, the pistons are sealed by a stationary round section sealing ring, also called a round cut O-ring. Technician B says that in disc brake calipers, the piston is sealed by a stationary square section sealing ring, also called a square cut O-ring. Who is correct?

All of the following are types of disc brake calipers, EXCEPT:

The caliper

Once you have identified the _________ of the fault, determine the action that will rectify the fault.

The primary components of a disc brake system include all of the following EXCEPT:

One safe way to test whether a braking problem is at the front or rear brakes is to drive at a low speed and:

Technician A says that when measuring a rotor's thickness variation, you should measure the rotor in a minimum of five to eight places around the face of the rotor. Technician B says that as long as the rotor faces look smooth after machining them, you don't have to measure them again. Who is correct?

When installing lug nuts, weight should be off the vehicle because:

Tech A says that some ABS wheel speed sensors create a square wave digital pattern. Tech B says that some wheel speed sensors create an AC sine wave pattern. Who is correct?

Technician A says that disc brake pads require much higher application pressure to operate than drum brake shoes because they are not self-energized. Technician B says that the square-cut O-ring (rather than springs) is what retracts the caliper piston when the brake pedal is released. Who is correct?