Font size
Worksheets3D Printing at NKN
Total questions: 16
Worksheet time: 8mins
The name of the web based slicer that we use is called:
Repetier
Ultimaker Cura
Kiri:Moto
Grid:Space
The machine type and name of the printers we use are called:
FDM
Creality Ender 6
SLA
Creality Halot 1
CNC
Tiny G
Laser
Snapmaker Original
The easiest way to rotate your object is to:
Use the X, Y, Z coordinates to rotate your object until it is flat on the bed.
Use the lay flat tool and select the side you want to be flat on the bed.
Use the scale tool to make the object rotate the way you want.
Use the mesh tool to orient your object flat to the bed.
If you want to add a flat plastic floor to the bottom of a print do the following:
Check the box next to raft enable
Turn on supports
Trick question - you can't do this.
Check the box next to draft shield.
Which button do you click to change the supports you have detected?
trash
check
detect
plus
True or false: This image is of a sliced object.
True
False
True or false: This image has a raft beneath it.
True
False
True or false: This image has a skirt around it.
True
False
If I uncheck the box next to z and scale z to .5 which of the following will be true?
The width of the object will be 46.79.
The height of the object will be 70.
The height of the object will be 140.
The height of the object will be 35.
True or False: This dog should be printed without supports.
True
False
Retraction is:
When the printer pulls the filament back up the nozzle for a fraction of a second.
When the printer returns to the home position on the x y axis.
When you are switching filament and you take the filament out of the machine.
When your print starts to peel off the print plate in the middle of a print.
Parts that connect to other 3D printed parts need to be:
The exact size of the part they need to fit into.
Slightly smaller than the part they need to fit into.
Slightly larger than the part they need to fit into.
True or false: It is smart to design your objects with minimal to no supports if possible.
True
False
Which of the following angles will require support to print successfully?
25%
45%
60%
80%
To export a file from Kiri:Moto you need to:
Click on slice from the menu.
Hover over slice and click preview.
Hover over slice and click export.
Click on View from the menu.
What changes do you need to make to settings to print in vase mode?
Set infill to grid, shell count to 3, and set speed to 10.
Set infill to grid, shell count to 1, and speed to 50.
Set infill to vase, shell count to 3, and speed the print up to 80.
Set infill to vase, shell count to 1, slow the print speed to 30.
