Which type of gear has a ratio of 1:1?

The distance between similar sides of adjacent teeth measured on the pitch line is called:

In rack gear, circular pitch is called:

__________ is equal to twice the addendum.

The meaning of module in a gearing system is:

Refers to the portion of the tooth surface adjacent to the involute lying inside a radial line passing through an imaginary intersection of the involute and the base circle.

In a pair of gears, spur or bevel, the smaller is often called:

Which of the following gears that are of the same and transmit motion at right angles?

The cone, which represents in bevel gears the original friction surfaces are called

Which of the following angles equal the pitch angle?

The surface between the flanks of adjacent teeth.

The portion of the common tangent to the base circles along which contact between mating involutes occurs.

The intersection between the axes of the line of centers and the common tangent to the base circles,

The angle between the element of the face cone and its axis.

Refers to a portion of the small end of the tooth.

The apex of the pitch cone.

Gear pump used in hydraulic system are used for:

In machine tool drive, the modulus for gears is usually selected between:

The shape of the curve on the side of gear is termed as:

The distance in a straight line from one side of a tooth to the side at points where the pitch circle passes through the tooth.

The _______ of a bevel gear is equal to the altitude of the pitch cone.

The _______ of a worm is the distance between the center of one tooth and the center of an adjacent tooth, measured perpendicular to the teeth.

The _______ of a worm gear is the concave surface of the gear tooth.

A type of gear, which is used for heavy duty work where a large ratio of speed is required.

A _________ is a cylinder with teeth resembling those of acme thread.

The _________ is the angle at which the teeth of a helical gear are slanted across the face of the gear.

A __________ is one thicker in proportion to its length than the involute tooth.

Which gears are used to connect parallel shafts lying in the same plane?

Which of the following is used to connect the shafts at an angle but lying in the same plane?

The product of circular pitch and diametral pitch is:

A line drawn through all the points at which the teeth touch each other.

The length of the gear tooth measured along an element of the pitch surface is called:

The ________ is equal to the tooth thickness plus the space width.

The _________ is the arc of the pitch circle where the tooth profile cuts the pitch circle when a pair of teeth first comes in contact until they are in contact as the pitch point.

The _________ traced by the outermost corner of one tooth on the plane of the other gear.

An imaginary circle passing through the points at which the tooth of the meshing gears contact each other.

A gear with teeth on the outer cylindrical surface.

The diameter of a circle coinciding with the top of the teeth of an internal gear.

It is standard practice to assume that the thickness of the tooth measured sound the pitch circle is exactly ________ the circle path.

The helix angles for the herringbone gears are used from ______for industrial gears.

The distance parallel to the axis from the pitch circle to the face of the shoulder or hub.

A machine that makes gear teeth by means of a reciprocating cutter that rotates slowly with the work.

A type of gear wheels connecting non-parallel, non-intersecting shafts usually at right angles.

The angle between the plane of the pitch circle and a plane tangent to the end of the tooth.

The circle containing the bottoms of the tooth spaces.

The depth of the tooth inside of the pitch line is called:

The amount by which the dedendum in a given gear exceeds the addendum of its mating gear.

The outside diameter of the worm measured on the central plane.

The circle from which the involute is generated.