Font size
WorksheetsSheet Metal Designs - Inventor
Total questions: 16
Worksheet time: 9mins
Which of the following is not involved in sheet metal work?
Bending
Welding
Joining
Cutting
What is the purpose of a bend relief?
To stop the metal from tearing and deforming in the corners
To create a safe corner
To create 90 degree angles
To make the metal softer and easier to bend
What does gauge refer to with sheet metal?
The type of metal
The coating on the metal
The thickness of metal
The cost of the metal
The base feature of a sheet metal part is most often a:
Face
Flange
Fold
Bend
Which tool would you use to create a full-length rectangular face off an existing face edge?
Flange
Fold
Bend
Face
Select two of the more commonly used sheet metal processes:
Drawing
Flanging
Extruding
Machining
Is it possible to construct a solid model first, then convert it into a sheet metal model in Autodesk Inventor?
Yes
No
Which command do we issue to display the flat pattern of a 3D sheet metal design?
Flat Pattern
Face
Flange
Fold
The location of the neutral axis in a bend is called the (a) . Since the amount of inside compression is always less than the outside tension, the k-factor can never exceed 0.50 in practical use. To the other extreme, a reasonable assumption is that the k-factor cannot be less than 0.25.
The conversion between the 3D formed designs and 2D flat pattern layouts requires the using of the correct K-Factor, which can be used to determine the required (a)
In the Drawing View dialog box, which option allows us to display the flat pattern of the sheet metal design?
Folded Model
Flat Pattern
Style
Label
During the creation of a sheet metal face, it can extend to meet another face and connect to it with a bend.
True
False
Sheet Metal Style settings cannot be overridden; a new Style must be created for different settings.
True
Flase
Sheet metal parts can contain features created with Autodesk Inventor modeling tools.
True
False
What is the procedure to change the edges connected by a bend feature?
Create a new sketch and draw new edges.
Create a new fold and use other edges.
Edit the bend and select the new edges.
The gauge of sheet metal ranges from 30 gauge to about 6 gauge. The higher the gauge number, the __________ the metal is.
thicker
thinner
