Font size
WorksheetsCases & Motherboards
Total questions: 25
Worksheet time: 23mins
A technician is installing a cable modem that supplies internet connectivity for a home office.
Which of the following cabling types would they use to connect the cable modem to the wall outlet?
Cat 6a
Multi-mode fiber
RG-6
Cat 5e
You need to connect the satellite television signal to your HD 4K flat screen TV using a coaxial cable.
Which of the following is the BEST type of coaxial cable to use?
RG-6
BNC
F-type
RG-59
Which of the following situations is MOST likely to justify an investment in a Cat 6a cable instead of a Cat 6 cable?
The cable needs to be run though a raised floor.
Users will be doing a lot of high-resolution printing.
Users will be streaming a lot of video.
The work area has a lot of electromagnetic interference (EMI).
A technician is running a network above a dropped ceiling that is also used for ventilation. The cable must be twisted pair and must be capable of Gigabit Ethernet speeds.
Which of the following cables should the technician use?
Plenum-rated Cat 6a
Riser-rated RG-58
Riser-rated Cat 5e
Plenum-rated multimode fiber
What is a major benefit STP provides that UTP does not?
Ability to install longer cable lengths
Lower cost
Safer for installations in overhead ceiling spaces
Greater resistance to interference
The CEO of your small company has asked you to connect a laptop computer to the small conference room LED TV. The CEO will be showing a promotional video that demonstrates the new company strategy through images and sound.
Which of the following cable types would work BEST for connecting the laptop to the display?
VGA
HDMI
Composite
DVI
You are installing a new SATA hard drive in your Windows workstation.
Which of the following connectors should you use to connect your hard drive to the motherboard?
40-pin connector
50-pin connector
7-pin connector
80-pin connector
Circle the Mini-ITX Tower
Circle the Micro-ATX Slim Tower
Circle the ATX Mid Tower
Circle the ATX Full Tower
You decided to upgrade your PC with a faster processor. To do this, you ordered a new motherboard over the internet that supports the processor that you want to use.
When the motherboard arrives, you discover that the motherboard uses the Micro-ATX form factor. Your current case is an ATX mid-tower with a standard ATX motherboard inside.
Which steps must you take for the Micro-ATX motherboard to work in the ATX case?
No additional steps are necessary. You can install the Micro-ATX motherboard in the ATX case.
Drill new holes in the ATX case to match the mounting hole pattern in the Micro-ATX motherboard.
Drill new holes in the Micro-ATX motherboard to match the mounting hole pattern in the ATX case.
Return the motherboard and replace it with an ATX form factor motherboard, as the Micro-ATX motherboard does not fit without modifying the case.
You work as the IT administrator for a small corporate network. One of the company employees needs to add an additional PCI card to the motherboard. When you open the computer, you see that the card that you purchased does not fit due to the card's height.
Which of the following is the BEST method for using the newly purchased card?
Use an expanded case to accommodate the height of the newly purchased card.
Use a FireWire card to allow the new card to be installed parallel to the motherboard.
Use a riser card to allow the new card to be installed parallel to the motherboard.
Use a parallel card to allow the new card to be installed parallel to the motherboard.
Which of the following BEST describes the purpose of the north bridge chipset?
The chip that controls all of the USB ports.
The chip that controls the PCI bus.
The chip that controls the system BIOS.
The chip that controls the audio.
You are in the process of installing a motherboard in a system case.
Which of the following objects should you place between the motherboard and the system case?
Heat spreaders
Passive heat sink
Support manual
Standoffs
You have just finished replacing the motherboard in your friend Ethan's computer with the same type of motherboard that the computer had originally. You tested the motherboard by powering it on and by verifying that the operating system started and that the applications work.
Now Ethan is complaining that his computer no longer recognizes his external hard drive, which he had connected to the previous motherboard.
Which of the following is MOST likely causing the external hard drive not to function?
The USB front panel connector was not properly connected.
The computer's power supply was not connected properly.
The replacement motherboard does not support external hard drives.
The hard drive has failed.
When booting your workstation, you hear a series of audible beeps, and the system locks up.
What is the FIRST step you should take when troubleshooting this issue?
Check for dust buildup inside the case.
Disconnect non-essential peripherals and try to reboot.
Check the motherboard documentation for POST errors.
Replace the motherboard battery.
While running a graphics editing program on your Windows workstation, a screen suddenly pops up with an error message warning. You note the error message, but the only way to continue working is to reboot your system.
What is this type of error screen called?
HVAC
POST
BSoD
SPoD
A clicking noise in your computer has now evolved into a grinding noise. In addition, you are beginning to see frequent error messages while running software, and your computer occasionally freezes.
What is the MOST likely cause of these issues?
A failing RAM card
A failing video card
A failing hard drive
A failing internal fan
When you try to boot your computer, it hangs after POST. When you access the UEFI setup program, you see that the date is several years behind, and the time is set to 12:01 a.m.
Which of the following is the MOST likely cause of this behavior?
A RAM module has become unseated from its socket.
The UEFI firmware is outdated.
The motherboard battery has failed.
The UEFI firmware is corrupt.
Which pin on the power supply connector connects to the power good wire on the motherboard in order to indicate an appropriate action for the motherboard if the power disappears, quickly reappears, or does not appear at all?
Pin 8
Pin 5
Pin 6
Pin 2
An employee calls to complain that their computer is behaving erratically. Some days, it functions correctly, and other days, it crashes frequently. Sometimes, the system won't boot at all.
You open the system case and notice the following:
Two of the mounting screws are missing from the system hard disk drive.
The system uses memory modules from several different manufacturers with mismatched capacities.
Several capacitors on the motherboard are bulging and have a brown liquid oozing from them.
The chassis fan on the front of the case is oriented to blow air into the system.
Reorient the chassis fan to draw air out of the system case.
Replace the existing memory modules with matching modules.
Correct Answer:
Use additional screws
Use additional screws to mount the hard disk drive to the system case.
Replace the motherboard.
When playing videos games or watching movies on your workstation, the screen sometimes freezes and displays strange colors. You suspect that your video card is causing the issues.
What is the BEST solution to resolve your display issues?
Replace the video card.
Check the video card connectors.
Update the video card driver.
Check the video card fan.
After arriving at work, you turn on your computer to begin your day. Instantly, you see smoke and smell a strange odor coming from the computer.
Which of the following would be the MOST important action to take first?
Open the computer case and look for dust buildup.
Shut off the system immediately.
Call the IT director.
Log in and check Event Viewer.
While performing data entry on your Windows 11 laptop, your screen suddenly goes black.
What can you do immediately to troubleshoot the issue without losing any data that you have entered?
Press F5 four times
Press the Windows key + P four times
Press Ctrl + Alt + Del
Press Ctrl + Shift + B
