Operator shall perform length measurement from _______ using calibrated tally tape or laser tally.

QC Inspectors are to ensure surface _______ (free from rusted mill scale) on the ID/OD surface prior to next process.

QC Inspectors are to ensure all stenciling templates shall have the following details:

i. Size, poundage, grade, connection

ii. Date, final length

iii. Lot number, heat number, mfg. number

iv. License number, IWO number, SI number, pipe number

For clear coating, stenciling shall be carried out _____ coating.

For black coating, stenciling shall be carried out _____ coating.

Stenciling to be applied ____ feet away from the box end.

QC Inspectors are to replicate and transfer the ______, ______ and _______ onto the box end.

i. Pipe number

ii. Size, poundage, grade

iii. Final length

iv. Manufacturing number

If identification remarking is required, the transferred markings shall include the words "________ <<SOBENA OFFSHORE INC SDN BHD>>"

All rejected connections shall be marked with a red band approximately _______ from the threaded area of the pin and box ends.

All rework and on-hold ends shall be marked with yellow band / masking tape approximately ______ from the threaded area of the pin and box ends.