Font size
WorksheetsS2 Coat hook
Total questions: 37
Worksheet time: 22mins
What must be worn at all times to prevent flying debris and corrosive materials from getting in your eyes?
safety goggles or safety glasses
helmet
hair ties
contact lenses or prescription glasses
What items can get caught in moving parts and should not be worn while working in the lab part of the MakerSpace classroom?
jewelry
loose hair
scarves
long and loose clothing
all of the above
When should you report an injury that happened during class.
immediately
after class
when it gets infected
never so I don't get in trouble
Name the tool.
File
Rasp
Chisel
Surform
This is a set of ?
Gouges
Chisels
Scrapers
Screwdrivers
Cutters
Name this workshop machine?
Milling machine
Pillar drill
Polishing machine
Angle grinder
Linisher
Which of these saws is called a Tenon saw?
Which of the following saws are used to cut curved shapes?
What is the holding device shown in the image?
Sawing Stool
Bench hook
Bench vice
Holding board
Choose the correct option...
Speed Square
Tri-Square
Carpenter-Framing Square
Combination Square
What is this sign?
tie hair back
wear goggles
wear gloves
wear dust mask
What are the safest ways to work with this machine?
Hair down, aprons untied, fingers close to the band facer.
Fingers away from band facer, while holding down product.
Hair up, goggles on, aprons tied properly.
Use band facer while chatting with friends.
What colour is the emergency stop button on a machine?
Red
Green
Blue
Yellow
Which of the following are health and safety rules of the workshop?
In the unlikely event that you do hurt yourself, tell the teacher straight away.
Always carry tools correctly when moving them from the cupboard to your station.
Keep your area neat and tidy, and clear of trip hazards.
All of the above.
When should you enter the marked zone around a machine?
When you are waiting to use the machine.
When you are using the machine.
Whenever you want.
When can you use the tools and machines?
Whenever you want.
When you have been trained and instructed to do so.
What is this machine used for?
Smoothing edges
Drilling holes
Bending materials
Cutting shapes
What method of 3D drawing is this?
Perspective
Oblique
Isometric
Freehand
This is an example of a ______ perspective drawing
ONE POINT
TWO POINT
THREE POINT
A DESIGN BRIEF ....
is the process of investigating specific factors of the problem to be solved.
outlines the problem to be solved (the very first step of the design process)
is a list of factors that the design must satisfy (completed before & after research)
a fancy pair of pants
A DESIGN SPECIFICATION is ....
is the process of investigating specific factors of the problem to be solved.
outlines the problem to be solved (the very first step of the design process)
is a list of factors that the design must satisfy (completed before & after research)
a rating on how well designed your home is
How many millimeters are there in a centimeter?
1
100
10
1000
What is this tool called?
Bradawl
Pilot hole
Stabber
Centre punch
What kind of metal was the hook made from?
Aluminium
Silver
Steel
Brass
What was the type of wood used for the back of the coat hook?
MDF
Pine
Red pine
Plywood
What was the object called that we used to bend the hook around?
Former
Shaper
Smasher
Jig
What kind of hammer was used to shape the aluminium
Hide mallet
Wooden mallet
Ball pein hammer
Cross pein hammer
Why do we use soft jaws?
To protect our work from being scratched
To make the vices look nicer
To protect our fingers from being squashed
To hold our work more securely
What is this called?
Engineers vice
Metal vice
Wood vice
Steel vice
What is this called?
Engineers square
Tri square
Try square
Metal square
Which of these is a scribe?
Which drawing below shows the Top View?
