WorksheetsAST: Quiz No. 4
Total questions: 25
Worksheet time: 13mins
Name
Class
Date
1.
It is a tool with a flattened, cross-shaped, or star-shaped tip that fits into the head of a screw to
a)
Spudgers
b)
Screwdrivers
c)
Nut drivers
d)
Soldering iron
2.
A small instrument like a pair of pincers for plucking out hairs and picking up small objects.
a)
Tweezers
b)
Noodle-nose Pliers
c)
Wire Strippers
d)
Spudgers
3.
A device that converts the output from an ac power line to a steady dc output or multiple outputs.
a)
Power Supply
b)
Function Generator
c)
Signal Generator
d)
Analog Oscilloscope
4.
The device that is used to measure voltage or voltage drop in a circuit.
a)
Ammeter
b)
Ohmmeter
c)
Voltmeter
d)
None of the Above
5.
A small hand-held tool that is used to remove the insulation from electric wires
a)
Tweezers
b)
Needle-nose Pliers
c)
Nut drivers
d)
Wire Strippers
6.
A piece of electronic test instrument used to generate and deliver standard waveforms, typically sine and square waves, to a device under test.
a)
Analog oscilloscope
b)
Power Supply
c)
Function Generator
d)
Frequency counter
7.
These tools are used in electronics, normally powered with electricity
a)
Power Tools
b)
Hand Tools
c)
Automated Tools
d)
Manual Tools
8.
Type of tools that are portable, handy, and are used manually.
a)
Power Tools
b)
Hand Tools
c)
Automated Tools
d)
Manual Tools
9.
Tools that are powered by electricity can be stored in which of the following?
a)
Peg board
b)
Tool box
c)
Designated storage area
d)
All of the Above
10.
Which of the following is not an issue when using, storing, and organizing manually powered tools?
a)
Easily lost
b)
Take up too much space
c)
Energy consumption
d)
None of the Above
11.
A unit of current equal to one millionth of an ampere
a)
Microampere
b)
Milliampere
c)
Miniampere
d)
Kiloampere
12.
It stands for the unit symbol mA
a)
Microampere
b)
Milliampere
c)
Miniampere
d)
Kiloampere
13.
Unit to measure of electrical resistance
a)
Ampere
b)
Volts
c)
Ohms
d)
None of the Above
14.
Unit to measure electromotive force
a)
Ampere
b)
Volts
c)
Ohms
d)
None of the Above
15.
It is the unit symbol of capacitance
a)
uA
b)
mA
c)
uF
d)
V
16.
It is a multi-function measurement device that can measure voltage, current, and resistance
a)
Multimeter
b)
Ammeter
c)
Ohmeter
d)
Voltmeter
17.
It converts the measured variables into a digital signal and displays numerical value on screen.
a)
Analog Multimeter
b)
Digital Multimeter
c)
Either of them
d)
None of the them
18.
Is a series of marking used for reading the value of quantity.
a)
Test probes
b)
Range
c)
Pointer/Needle
d)
Scale
19.
Indicates the values read from the scale.
a)
Test probes
b)
Range
c)
Pointer/Needle
d)
Scale
20.
User should select this range so that any value in the resistance scale is multiplied by 1,000
a)
Range x1
b)
Range x10
c)
Range x100
d)
Range x1k
21.
Read the resistance value given that Range is set to x1
a)
3.5 Ω
b)
80 Ω
c)
1.7 kΩ
d)
38 kΩ
22.
Read the resistance value given that Range is set to x10
a)
3.5 Ω
b)
80 Ω
c)
1.7 kΩ
d)
38 kΩ
23.
Read the resistance value given that Range is set to x100
a)
3.5 Ω
b)
80 Ω
c)
1.7 kΩ
d)
38 kΩ
24.
Read the resistance value given that Range is set to x1k
a)
3.5 Ω
b)
1 MΩ
c)
1.7 kΩ
d)
38 kΩ
25.
Read the resistance value given that Range is set to x10k
a)
3.5 Ω
b)
1 MΩ
c)
1.7 kΩ
d)
38 kΩ
100 %
