The __________ side of the fabric is the side where there is no design.

When stitching a regular seam, what must be done at the beginning and end of the stitching the keep the treads from pulling out of the fabric?

The fabric between the edge of the fabric and the line of stitching, about 5/8" of fabric is called ______________.

A __________ is used on the bottom of a garment when the raw edge is folded under and stitched.

When machine basting, your stitch length should be set to its __________ length.

Step 1 in gathering is to machine baste ______ row(s) of stitches on the right side of the fabric with the first row on the 5/8" seam line and the second ______ into the seam allowance.

When cutting out a pattern piece, notches should be cut

Making a long piece of fabric to fit with a shorted piece of fabric is the purpose of what stitch?

The part of the sewing machine that holds the fabric in place while sewing is called the

The edge of the fabric is not stitched or finished is called ________.

___________ are folds in fabrics used to be full in one area and tailored in another.

Your thread and bobbin thread should always match the garment

Which is a way NOT to finish a seam?

Notions include thread, zipper, buttons and other items needed to complete the garment.

When sewing, pins should be placed

When replacing the needle in the sewing machine, the flat edge goes to the front.

Basting stitching is longer than regular stitching.

The selvage is the cross cut edge of the fabric.

All pattern pieces should be marked before removing the pattern pieces from the fabric.