2. Construction lines are used for... 

3. Line contrast is... 

4. Guidelines are used to guide freehand lettering. 

5. What is the recommended thickness of outlines? 

6. Which is something that dashed lines do NOT represent? 

7. In what situation is an extension line also a centerline? 

8. What are extension lines used for? 

9. Extension lines end with a small space from a feature and extend about ______ beyond the last dimension line.  

10. Leader lines are used to connect notes to a related part. 

11. When dimension lines terminate at extension lines, they have a _____. 

12. How does architectural line work differ from mechanical drafting line work? 

13. The advantage of drawing certain outlines thicker than other lines is to add clarity to a drawing. 

14. What can be used to make walls and partitions stand out in a drawing where every line is the same thickness? 

15. Sans Serif is a font used in architectural text. 

16. The minimum recommended text height is ___ inch. 

17. The recommended horizontal space between sentences or lines should be a minimum of ___ the height of the letters. 

18. Text fractions shouldn’t be full sized. 

19. What’s another name for the Cartesian coordinate system? 

21. The origin in the Cartesian coordinate system is at 0,0. 

22. Points on an absolute coordinate system are located relative to ________. 

23. How is an absolute coordinate specified that is 4 units on the x axis and 3 units on the y axis? 

24. Relative coordinate points are located from the _______. 

25. If the first point is located at 2,2, then how do you specify the next point, using relative coordinates, if it is to be 2 units directly above the first point? 

26. How are polar coordinate points located? 

27. If the first point is located at 2,2, how do you specify the next point, using polar coordinates, if it is to be 2 units directly above the first point? 

28. The snap command in the CADD system allows for the user to select exact points on a grid. 

29. What is the function of the coordinate display on a CADD system? 

30. _____ is a complete assortment of any one size and style of lettering or text. 

31. Which one of these does annotation NOT refer to? 

32. The default in a CADD system is any value that is maintained by the computer for a command or function that has variable parameters. 

33. Give the terminology used to describe a base drawing that contains standard components, values, settings, borders, and title blocks. 

34. What is another name for a template? 

36. What drawing scale factor should be used if you want text 1/8” (3 mm) high on a drawing with a ¼" = 1’-0” scale? 

37. Which is an advantage of doing text with a CADD system. 

38. There is no CADD text that looks like architectural freehand text since it wouldn’t look high-quality.