Foil shielded twisted pairs with no outer shield would have what classification?

How many ohms does coaxial cabling utilize in networking applications?

What is the standard ohms for a balanced twisted pair?

What type of cable contains any combination of twisted-pair, coaxial, or fiber optic cabling?

CAT5E maximum untwist is....

As a rule of thumb UTP cable should be minimum of _______ inches from power cables and outlets, unless is in a conduit or you install STP, which then you should stay greater than 2 inches.

If possible, you should try to install networking cable in the next stud space over from a power cable or power outlet, regardless if it is shielded or not.

Networks continue to get smaller and less complicated.

Estimated that a 1 percent drop in Ethernet packets can correlate to an 80 percent drop in throughput.

Backbone cabling connects ______ to ______.

NEC cable ratings based on: (Choose three.)

When running a cable through a false ceiling spaced utilized for HVAC intake you shall use what type of rated cabling?

Material that is meant to insulate conductors from one another have what kind of properties?

CAT6 and CAT6A cables often use ______ AWG

Solid conductors have better electrical properties than stranded conductors.

What industry standards body and standards series numbers would you reference for Ethernet Applications and Cabling? (Choose Two)

CAT6 can support 10GBase-T for up to what distance?

CAT6 can support 1000Base-T for up to what distance?

According to the ANSI/TIA-568-D, horizontal cable shall not exceed what maximum distance?

NEC is updated every _____ years.

NEC is updated by what association/organization?

To reduce the cost of a hierarchical star, the network designer has the option to locate network elements closer to equipment outlets. What is this called?

In certain situations it makes sense to install all network equipment in a central location. What is this implementation of the hierarchical star topology called?

What is the preferred UTP cabling media to support 10Gbps network speeds?

Choose the description below that matches the following designation: 100Base-TX

Set of rules that serve as generally accepted guidelines recommended for the industry to follow. Specifies minimum acceptable requirements.

Local codes take precedence over all other installation guidelines.

This picture is an example of what type of cable pathway?

Which ANSI/TIA reference lays out minimum standards for telecommunications rooms, enclosures, and equipment rooms?

The 66 punch-down block is the most widely used punch-down block for networking applications.

Referring to the picture provided, what classification would this cable have?

According to the ANSI/TIA-606 Which of the four classes of administration would the State Tech Campus fall under. (Take your time, you have 3 minutes to answer this one)

Main cross-connect is typically located in the...

First-level backbone cable connects what two spaces?

A cable connecting from your ISP Demarcation to your ER should be labeled what color, according to the ANSI/TIA-606?

According to the TIA-1005-A, a 23AWG horizontal cabling with a length of 85m has a maximum length of work area cord of...

What is a workgroup switch?

A 24-port 100Base-TX switch with all ports being utilized, installed with a 1000Base-SX Fiber Optic uplink port would be an example of a ________ situation.

In what environments would you want to ensure that you have a nonblocking situation?

Core switches are located where?

You have 12 users who have 100Base-T NIC cards on their computers. The 12-port workgroup switch the yare connected to has a 1000Base-SX uplink connection. What is the maximum throughput per user that this switch is capable

End to end cabling including patch cable and cabling to the workstation is called ________.