Font size
WorksheetsCommon Handtool Review
Total questions: 40
Worksheet time: 13mins
A handtool used to remove nails that are driven in very tightly below the surface. The claw on the tool is scooped for access
pry bar
wrecking bar
crow bar
cat's paw
The most common types of screwdrivers are the _______ and _________.
Torx and Robertson
Phillips and Allen
Slotted and Phillips
Torx and Phillips
One should never use a chisel or punch if it's use has resulted in the
tip becoming dull
tool getting bent or warped
head becoming frayed or "mushroomed"
the tool being broken
An object that is perfectly perpendicular to the ground is said to be
level
flat
plumb
tall
An object that is perfectly flat and parallel to the ground is called
flat
level
straight
spirit
The type of screw with a square shaped slot is called a ___________
clutch drive
Phillips
Robertson
Allen
The combination square can check for 2 types of angles
obtuse and acute
90 deg and 45 deg
straight and obtuse
right and acute
What is the instrument in the picture measuring?
straight (up off the ground)
level (parallel to the ground)
plumb (perpendicular to the ground)
depth (deep in the ground)
Which is the cross-peen hammer?
pop it against the surface
let the dust settle off
mark it with a pencil
press it down with your fingers
Pliers with serrated teeth that grip flat, square, round, or hexagonal objects are officially called _____ pliers but commonly know as channel locks.
needle-nose
slip-joint
lineman
tongue and groove
A metal tool that has a sharpened, beveled edge, and is most often used to cut and shape stone or metal is a _____.
cat's paw
wood chisel
center punch
cold chisel
What is the most common type of Hammer?
Claw
Ball Peen
Thor's
what's a hammer?
What type of layout tool is this?
L square
French square
Combination square
Speed Square
What is this?
Needle Nose Pliers
Locking Clamp
Adjustable Wrench
Tongue and Grove Pliers
What is this tool?
Tongue and grove pliers also called Channel Locks
Adjustable Wrench also called a Cresent Wrench
Super Grips also called Wontletgoes
Locking Pliers also called vise grips
What is this tool
Tongue and Groove Pliers
Side Cutter Pliers
Slip Joint Pliers
Needle Nose Pliers
What is this tool
Tongue and Groove Pliers
Side Cutter Pliers
Slip Joint Pliers
Needle Nose Pliers
What type of screwdriver
Torx Screwdriver
Philip Screwdriver
Slotted Screwdriver
Hex Screwdriver
Which is a wood chisel?
What type of screwdriver?
Philips head screwdriver
Torx screwdriver
Wire cutter
Flat head screw driver
Which tool do you use?
Which Screw Driver do you use?
torx
Phillips
Robertson
Allen
Identify the Torx Screwdriver Symbol
Identify the Philips Screwdriver Symbol
Identify the Allen Screwdriver Symbol
Identify the Slotted Screwdriver Symbol
What type of pliers?
vice grip
slip-joint
Lineman
needle nose
What type of pliers?
vice grip
slip-joint
Lineman
needle nose
The proper angle for the edge of a cold chisel is___
90 degrees
60 degrees
45 degrees
30 degrees
When an object is plumb, it is___
perfectly vertical
angular
side by side
perfectly horizontal
Which of the following is true about picking the correct screwdriver?
The width of the blade should be wider than the slot of the screw
The width of the blade should be Narrower than the slot of the screw
The width of the blade should be proportional of the slot of the screw
The width of the blade should be width of the slot of the screw
Where should you grab a Hammer Handle?
the back of the face
close to the end
in the middle
by the claw
What is the instrument in the picture measuring?
straight (up off the ground)
level (parallel to the ground)
plumb (perpendicular to the ground)
depth (deep in the ground)
What tool is this
6 point wrench
6 point combination wrench
open end wrench
open and box wrench
What tool is this?
adjustable wrench
moveable wrench
monkey wrench
adaptable wrench
Combination Wrench
Adjustable Wrench
Open End Wrench
Box End Wrench
Combination Wrench
Socket Wrench
Adjustable Wrench
Pipe Wrench
Box End Wrench
Combination Wrench
Adjustable Wrench
Pipe Wrench
