Font size
WorksheetsShop Tools and Equipment
Total questions: 22
Worksheet time: 14mins
Power for tools used in the automotive shop is provided by ____.
Hydraulics
Air
Electric
All the above
Technician A says that shop air pressure usually ranges from 100–150 psi. Technician B says shop air pressure is around 300 psi. Who is correct?
Tech A
Tech B
Both
Neither
When using a drill press, Technician A believes oil should be applied to the drill bit to help it cut faster. Technician B believes oil should be applied to the drill bit to prevent the bit from overheating and losing hardness. Who is right?
Tech A
Tech B
Both
Neither
For safety, battery charger leads must be connected to the battery after the charger is turned on.
True
False
It does not matter
Give me a second to google that right quick
It is safe to work under a vehicle that is only supported by a jack.
True
False
Depends on the jack
if it falls im tough as nails and will just bench press it for a few sets
A wire wheel in a bench grinder should not be used to clean soft metal or brass parts.
True
False
Not Sure
Also Not sure but too embarrassed to ask
Impact sockets are usually Identified by their color, Flat (a)
_____ are used to support a vehicle while working under it.
Hydraulic jack
Jack Stands
Old Rims
Concrete Blocks
Which of the following is not a commonly used air tool
Impact Gun
Air Hammer
Drill Press
Air Ratchet
When using a drill press, Technician A believes drilling pressure should not be released until the bit breaks completely through the bottom of the part. Technician B believes pressure release should occur just before the bit breaks through. Who is right?
Tech A
Tech B
Both
Neither
Safety Glasses are not needed when using the air hammer as long as you keep your eyes closed
true
false
All these are parts of a shops air system except
Quick Connects
Lines
Compressor
The overhead mechanical combustion contactor
Which of the following should always be worn when grinding metal parts?
Baseball Cap
Safety Glasses
Ear Plugs
Welding Gloves
Before using a hydraulic jack, you should always:
Store it upside down
Check for oil leaks
Kick it to make sure it's sturdy
Paint it a new color
When operating an air compressor, it is important to:
Block the air vents for quiet operation
Store oily rags on top of it
Drain the tank regularly to remove moisture
Leave it running unattended overnight
What is the primary purpose of an automotive lift in a workshop?
To elevate vehicles for easier access to the undercarriage
To increase the speed of a vehicle
To enhance the aesthetic appearance of a vehicle
To improve fuel efficiency
Which of the following is a critical safety feature of automotive lifts?
Automatic tire inflation
Hydraulic fluid level indicator
Safety lock mechanism
Built-in air conditioning
Why is it important to regularly inspect the cables and pulleys of an automotive lift?
To ensure the lift operates quietly
To prevent electrical failures
To avoid mechanical failures and accidents
To enhance the lift's speed
Which of the following is a potential hazard when using an automotive lift?
Overloading the lift
Using the lift in a well-ventilated area
Wearing safety goggles
Following the manufacturer's instructions
What is the function of the safety lock mechanism in an automotive lift?
To prevent unauthorized use
To secure the lift at a desired height
To enhance the lift's speed
To reduce noise during operation
What is the recommended action if an automotive lift shows signs of hydraulic fluid leakage?
Stop using the lift and repair immediately
Continue using with caution
Ignore the leakage
Increase the hydraulic pressure
