NEW
Font size
WorksheetsIDF 3.01 and 3.02 Review
Total questions: 35
Worksheet time: 18mins
Which tool enables a designer to draw angled and vertical lines on a floor plan?
triangle
T-Square
architectural scale
template
Which type of construction drawing should Cara study to see a close-up view of her fireplace mantel?
detail
elevation
floor plan
section
What would a designer use to trace architectural symbols onto a floor plan?
architectural scale
T-square
template
triangle
Which tool uses the side of the table as a guide, along with an attached metal flat bar, enabling the designer to draw accurate horizontal lines?
architectural scale
T-square
template
triangle
Scott wants to create a rendering that is smudge proof and permanent. Which rendering tool(s) would best meet Scott's needs?
chalk
colored pencils
felt-tip markers
graphite pencil
Which construction document illustrates the construction of the interior of a wall?
detail
elevation
floor plan
section
Jessica wants to draw her bedroom to scale using 1/4 inch = 1 foot. To ensure Jessica's wall measurements are the correct size, she should use which tool?
architectural scale
drawing board
drawing pen
T-square
How can Maggie tell the difference between interior walls and exterior walls on a standard floor plan?
Interior wall thicknesses are typically 4 inches wider than exterior wall thicknesses.
Interior wall thicknesses are typically two inches wider than exterior wall thicknesses.
Exterior wall thicknesses are typically 2 inches wider than interior wall thicknesses.
Exterior wall thicknesses are typically six inches wider than interior wall thicknesses.
What two tools would Veronica need to draw perpendicular horizontal and vertical lines on her drawing?
drafting board and architectural scale
triangle and architectural scale
T-square and drafting board
T-square and triangle
If the horizontal line on a perspective drawing is close to the floor, what can one infer about the person drawing the picture?
The artist is standing up.
The artist is using a graphite pencil.
The artist is using a T-square.
The artist is low to the ground.
When one draws an interior wall elevation, objects that sit on the floor should:
be drawn on the top of the page.
be drawn in the middle of the page.
be drawn on the bottom of the page.
not be drawn.
Jessica wants to experiment with different furniture arrangements for her bedroom without making changes to her floor plan. Which tool/material should she utilize on top of her existing floor plan?
architectural scale
drawing board
tracing paper
T-square
A limitation of a section drawing is that:
it only portrays information at the point of the cut.
it only portrays the floor plan.
it only portrays one interior wall.
it only portrays a rendering.
Madeline wants to easily see where a bookcase might fit in her living room floor plan. An easy way to accomplish this is to sketch the bookcase on:
computer paper
construction paper
sketching paper
tracing paper
If Molly is using the scale 1/2" = 1', how many feet does a couch that measures 3 inches represent?
2 feet
4 feet
6 feet
8 feet
The dimensions of each room in a house can be determined from a:
floor plan.
plot plan.
room elevation.
section view.
Jessica wants to draw her bedroom to scale using 1/4 inch = 1 foot. To ensure Jessica's wall measurements are the correct size, she should use which tool?
Architectural scale
Drawing board
Drawing pen
T-square
Which industry standard software is used by architects and design professionals to support building information modeling (BIM) workflows?
Homestyler
Illustrator
Photoshop
Revit
How can Maggie tell the difference between interior walls and exterior walls on a standard floor plan?
Interior wall thicknesses are typically four inches wider than exterior wall thicknesses
Interior wall thicknesses are typically two inches wider than exterior wall thicknesses
Exterior wall thicknesses are typically two inches wider than interior wall thicknesses
Exterior wall thicknesses are typically six inches wider than interior wall thicknesses
Nathan MOST LIKELY drew his orthogonal lines lightly because:
All lines on a perspective drawing should be drawn lightly.
Most of the orthogonal lines will eventually be erased.
Orthogonal lines must be traced with ink later
One should only use a dark pencil lead.
Jessica wants to experiment with different furniture arrangements for her bedroom without making changes to her floor plan. Which tool/material should she utilize on top of her existing floor plan?
Architectural Scale
Drawing board
Tracing paper
T-square
What two tools would Victoria need to draw perpendicular horizontal and vertical lines on her drawing?
Drafting board and Architectural Scale
Triangle and Architectural Scale
T-square and Drafting Board
T-square and Triangle
A limitation of a section drawing is that:
It only portrays information at the point of the cut.
It only portrays the floor plan.
It only portrays one interior wall.
It only portrays a rendering.
If the horizontal line on a perspective drawing is close to the floor, what can one infer about the person drawing the picture?
the artist is standing up.
the artist is using a graphite pencil.
the artist is using a T-square.
the artist is low to the ground.
Emily measured two walls on her floor plan. She was able to determine which wall was an internal wall and which was an external wall because:
external walls are typically two inches thicker than internal walls.
external walls are typically 6 inches thicker than internal walls.
internal wall thicknesses are the same as exterior wall thicknesses.
internal walls are typically 2 inches thicker than external walls
When one draws an interior wall elevation, objects that sit on the floor should:
be drawn on top of the page.
drawn in the middle of the page.
be drawn on the bottom of the page.
not be drawn.
Madeline wants to easily see where a bookcase might fit on her living room floor plan. An easy way to accomplish this is to sketch the bookcase on:
computer paper
construction paper
sketching paper
tracing paper
If Molly is using the scale 1/2=1, how many feet does a couch that measures 3 inches representation?
2 ft
4 ft
6ft
8ft
Floor plans, elevations, and section drawings are classified as which type of drawings?
orthographic
renderings
free-hand sketches
2-point perspective drawings
Jessica wants to create business cards for her interior design business. Which digital media tool should she use?
AutoCAD
inDesign
revit
sketchup
The Magnolia House designers use CADD-based programs more often than hand drawings because:
CADD drawings are cheaper than hand drawings
CADD programs are easier to learn than hand drawing
CADD drawings are easier to modify
CADD programs are available only designers.
The dimensions of each room in a house can be determined from a:
floor plan
plot plan
room elevation
section view
Computer-based design programs are:
only available to certified interior designers
available in many forms, including retail formats
only available to paying customers.
free for anyone to use
Sophia is lettering her floor plan. To ensure her writing is consistent and commutative, she must:
write legibly in consistent font that is spaced evenly in all capital letters.
write legibly with varying fonts that are spaced evenly in all lowercase letters.
write legibly with varying fonts that are spaced according to size in all capital letters.
write legibly in a consistent font that is spaced evenly in all lowercase letters.
Jacob needed to edit a photo of his client's exterior home rendering. Which program would be most helpful?
Adobe Photoshop
Homestyler
Planner 5D
Revit
