NEW
Font size
WorksheetsQuiz 6.1
Total questions: 14
Worksheet time: 7mins
The Haas control is the computer system that controls the machine?
True
False
The reset key does the following
Resets the time clock
Resets the vice
Clears alarms, any text and resets the machine for operation
Resets the coolant spray
Any time you have pressed the E-stop You will need to rotate it clockwise and press reset to clear the alarm?
True
False
When you start the machine, pressing the power up key does what?
Zero returns the axis and gets the machine ready to run
Starts the machine
Create an algorithm to help with bitcoin mining
It counts any outstanding parts
If the machine gets interrupted during a tool change, the machine cannot run until the tool change is complete. Pressing recover allows the tool change to go to home
True
False
One of the tool release buttons is located on the control keypad where is the other located
In the stores behind the door
Right above the spindle and coolant line, on the spindle head cover
On the outside of the machine guards
On the wall behind the machine
The display mode sections of the control keypad are what you see in the upper two quadrants of the display screen.
True
False
The first button to review in the display section is the program button. This button shows the operator...........
Information relating to the active program
All the jobs been run in the last 7 days
All the jobs for the following week
The lunch menu
The offset button..............
Shows the distance to go
How far away you should stand from the machine
Opens a window on the screen that contains work and tool offsets
Shows the offsets from the last job
The 4 keys to the right of the Mode keys control what you can do within each of the mode keys
True
False
When you have chosen the handle jog button The suggested incrementfor axis movement is
0.001
0.10
1.0
0.0001
The speed of the axis when using the jog lock key is controlled by the last axis key that was pressed?
True
False
The last quadrant of the control keyboard discussed in the video was the override section this is important for the setup person AND the operator?
True
False
The operator can use the keys in the spindle and axis override section whenever they want to?
True
False
