WorksheetsLab Manual 1-Quiz
Total questions: 23
Worksheet time: 12mins
Name
Class
Date
1.
What is the primary purpose of Cisco Packet Tracer as a networking tool?
a)
Web browsing
b)
Graphic design
c)
Network simulation and visualization
d)
Word processing
2.
Which cable type is used to connect a PC to a switch in a simple network topology?
a)
Fiber optic cable
b)
Coaxial cable
c)
Copper Straight-Through cable
d)
Crossover cable
3.
How do you assign an IP address to a router interface using the command-line interface (CLI)?
a)
ip config <IP_address> <subnet_mask>
b)
set ip <IP_address> <subnet_mask>
c)
ip address <IP_address> <subnet_mask>
d)
assign ip <IP_address> <subnet_mask>
4.
In a simple network topology with one router, one switch, and two PCs, how do you test connectivity between the PCs?
a)
Use the tracert command
b)
Use the ping command
c)
Use the arp command
d)
Use the nslookup command
5.
Which of the following is NOT a network device in Cisco Packet Tracer?
a)
Router
b)
Switch
c)
PC
d)
Smartphone
6.
What is the default gateway address for a PC in a simple network topology with a router IP address of 192.168.1.1?
a)
192.168.1.0
b)
192.168.1.255
c)
192.168.1.1
d)
192.168.0.1
7.
How do you enable an interface on a Cisco router using the CLI?
a)
shutdown
b)
no shutdown
c)
enable interface
d)
start interface
8.
Which tab do you use in Cisco Packet Tracer to configure a router using CLI commands?
a)
Physical tab
b)
Desktop tab
c)
Config tab
d)
CLI tab
9.
What does the "Simulation" mode in Cisco Packet Tracer allow you to do?
a)
Configure network devices
b)
View network device specifications
c)
Observe packet flow and events
d)
Design network topologies
10.
What is the purpose of the "Add Simple PDU" tool in Cisco Packet Tracer?
a)
To create a network topology
b)
To create a packet for simulation purposes
c)
To configure network devices
d)
To test network connectivity in Realtime mode
11.
Which OSI layer is responsible for routing packets in a network?
a)
Layer 1
b)
Layer 2
c)
Layer 3
d)
Layer 4
12.
In Cisco Packet Tracer, how do you configure the IP address of a PC?
a)
Through the Command Prompt
b)
Through the IP Configuration tool on the Desktop tab
c)
Through the CLI tab
d)
Through the Config tab
13.
What command is used to enter the configuration mode in a Cisco router's CLI?
a)
configure terminal
b)
config mode
c)
enable config
d)
terminal configure
14.
What is the subnet mask for an IP address with a prefix of /24?
a)
255.255.255.0
b)
255.255.0.0
c)
255.0.0.0
d)
255.255.255.128
15.
Which command is used to save the running configuration of a Cisco router to the startup configuration?
a)
copy running-config startup-config
b)
save running-config startup-config
c)
write memory
d)
copy startup-config running-config
16.
How can you view the current configuration of a Cisco router using the CLI?
a)
show configuration
b)
show running-config
c)
display config
d)
view config
17.
What is the primary function of a switch in a network?
a)
Forwarding data packets based on IP addresses
b)
Connecting devices to the internet
c)
Forwarding data packets based on MAC addresses
d)
Acting as a firewall
18.
Which command is used to exit the configuration mode in a Cisco router's CLI?
a)
exit
b)
end
c)
quit
d)
leave
19.
In Cisco Packet Tracer, what is the purpose of the Event List panel in Simulation mode?
a)
To display a list of all network devices
b)
To show the status of network device interfaces
c)
To display a list of events and status messages related to packet flow
d)
To log all commands entered in the CLI
20.
What protocol does the ping command use to test connectivity between devices?
a)
TCP
b)
UDP
c)
ICMP
d)
IGMP
21.
Which of the following is a key advantage of using Cisco Packet Tracer for network simulation?
a)
It allows for real-world network deployment
b)
It provides a cost-effective and safe environment for learning and experimentation
c)
It supports all network device manufacturers
d)
It replaces the need for physical network devices in production environments
22.
Which of the following network devices typically operate at the OSI Layer 3?
a)
Hubs
b)
Switches
c)
Routers
d)
Bridges
23.
In a network topology with one router, one switch, and two PCs, which device is responsible for forwarding data packets between the PCs?
a)
Router
b)
Switch
c)
PC 1
d)
PC 2
100 %
