WorksheetsISTQB Question Bank 381 to 420
Total questions: 40
Worksheet time: 10hrs 0mins
Name
Class
Date
1.
Which of the following is correct about static analysis tools?
a)
Static analysis tools are used only by developers
b)
Compilers may offer some support for static analysis
c)
Static analysis tools help find failures rather than defects
d)
Static analysis tools require execution of the code to analyze the coverage
2.
Which of the following list contains only non-functional tests?
a)
Interoperability (compatibility) testing, reliability testing, performance testing
b)
System testing, performance testing
c)
Load testing, stress testing, component testing, portability testing
d)
Testing various configurations, beta testing, load testing
3.
Without testing all possible transitions, which test suite will test all marital statuses?
a)
SO-S1-S2-S4-S1-S4
b)
SO-S1-S2-S3-S1-S2
c)
SO-S1-S4-S1-S2-S3
d)
SO-S1-S2-S3-S4-S1
4.
What test items should be put under configuration management?
a)
The test object, the test material and the test environment
b)
The problem reports and the test material
c)
Only the test object. The test cases need to be adapted during agile testing
d)
The test object and the test material
5.
This part of a program is given:
a)
One
b)
Indefinite
c)
Two
d)
Four
6.
What is the purpose of test exit criteria in the test plan?
a)
To specify when to stop the testing activity
b)
To set the criteria used in generating test inputs
c)
To ensure that the test case specification is complete
d)
To know when a specific test has finished its execution
7.
If a program is tested and 100% condition coverage is achieved, which of the following coverage criteria is then guaranteed to be achieved?
a)
100% branch coverage
b)
100% condition coverage and 100% statement coverage
c)
Equivalence class and boundary value coverage
d)
No other white box coverage criterion is guaranteed to be fulfilled 100%
8.
Using the diagram below, which test suite will uncover invalid state transitions for employee status reporting software?
a)
Prospective – Active – Resigned – Active – Terminated – Purged
b)
Prospective – Active – On Leave – Active – Resigned – Retired
c)
Prospective – Active – Retired – Active – On Leave – Purged
d)
Prospective – Active – On Leave – Active – Retired – Active
9.
Which test approaches or strategies are characterized by the descriptions below?
a)
S4, T3, U2, V1
b)
S1, T2, U3, V4
c)
S2, T3, U1, V4
d)
S3, T4, U2, V1
10.
Which of the following statements is correct?
a)
Static analysis tools produce statistics during program execution
b)
Configuration management systems allow us to provide accurate defect statistics of different configurations
c)
Stress testing tools examine the behavior of the test object at or beyond full load
d)
Performance measurement tools can be used in all phases of software life-cycle
11.
Which of the following project inputs influence testing?
<br>
(I) Contractual requirements
(II) Legal requirements
(III) Industry standards
(IV) Application risk
(V) Project size
a)
(I) through (III) are correct
b)
All alternatives are correct
c)
(II) and (V) are correct
d)
(I), (III) and (V) are correct
12.
Which of the following are USUALLY stated as testing objectives?
I. Finding defects in the software
II. Reducing maintenance costs
II. Confirming that the system works
IV. Assessing the quality of the software
V. Meeting schedule milestones
a)
I and II
b)
I, III; and IV
c)
II, IV, and V
d)
III and IV
13.
Maintenance testing is:
a)
Testing management
b)
Synonym of testing the quality of service
c)
Triggered by modifications, migration or retirement of existing software
d)
Testing the level of maintenance by the vendor
14.
Why is incremental integration preferred over “big bang” integration?
a)
Because incremental integration has better early defects screening and isolation ability
b)
Because “big bang” integration is suitable only for real time applications
c)
Incremental integration is preferred over “Big Bang Integration” only for “bottom up” development model
d)
Because incremental integration can compensate for weak and inadequate component testing
15.
V-Model is:
a)
A software development model that illustrates how testing activities integrate with software development phases
b)
A software life-cycle model that is not relevant for testing
c)
The official software development and testing life-cycle model of ISTQB
d)
A testing life cycle model including unit, integration, system and acceptance phases
16.
Which of the following items need not to be given in an incident report?
a)
The version number of the test object
b)
Test data and used environment
c)
Identification of the test case that failed
d)
The location and instructions on how to correct the fault
17.
Who should be responsible for coordinating the test strategy with the project manager and others?
a)
Tester
b)
Developer
c)
Customer
d)
Test leader
18.
Acceptance testing means
a)
Testing performed on a single stand-alone module or unit of code
b)
Testing after changes have been made to ensure that no unwanted changes were introduced
c)
Testing to ensure that the system meets the needs of the organization and end user.
d)
Users test the application in the developers environment
19.
The _______ testing should include operational tests of the new environment as well as of the changed software
a)
System Testing
b)
Integration testing
c)
Component testing
d)
Maintenance testing
20.
Using the diagram below, which test suite will check for ALL valid state transitions using the LEAST effort?
a)
SO-S1-S2-S4-S1-S4-S1-S2-S3-S1
b)
SO-S1-S2-S4-S1-S2-S3-S1
c)
SO-S1-S4-S1-S2-S3-S1
d)
SO-S1-S2-S4-S1-S4-S1-S2-S3
21.
Input and output combinations that will be treated the same way by the system can be tested using which technique?
a)
Boundary value
b)
Equivalence partition
c)
Decision table
d)
State transition
22.
Branch Coverage
a)
Another name for decision coverage
b)
Another name for all-edges coverage
c)
Another name for basic path coverage
d)
All the above
23.
The _________ Is the activity where general testing objectives are transformed into tangible test conditions and test designs
a)
Testing Planning
b)
Test Control
c)
Test analysis and design
d)
Test implementation
24.
Integration testing where no incremental testing takes place prior to all the system�s components being combined to form the system.
a)
System testing
b)
Component Testing
c)
Incremental Testing
d)
Big bang testing
25.
A test case design technique for a component in which test cases are designed to execute statements is called as?
a)
State transition Testing
b)
Static Testing
c)
Transition testing
d)
Statement testing
26.
Who should have technical and Business background.
a)
Moderator
b)
Author
c)
Reviewer
d)
Recorder
27.
A test plan defines
a)
What is selected for testing
b)
Objectives and results
c)
Expected results
d)
Targets and misses
28.
Features to be tested, approach refinements and feature pass / fail criteria BUT excluding environmental needs should be specified in which document?
a)
Test case specification
b)
Test plan
c)
Test procedure specification
d)
Test design specification
29.
Test basis documentation is analyzed in which phase of testing
a)
Test Analysis
b)
Test Design
c)
Test Execution
d)
Test Planning
30.
Which one is not the task of test leader?
a)
Coordinate the test strategy and plan with project managers and others
b)
Decide about the implementation of the test environment
c)
Write test summary reports
d)
Review and contribute to test plans
31.
if (condition1 && (condition2 function1()))
statement1;
else
statement2;
a)
Decision coverage
b)
Condition coverage
c)
Statement coverage
d)
Path Coverage
32.
_________ reviews are often held with just the programmer who wrote the code and one or two other programmers or testers.
a)
Formal Reviews
b)
Peer Reviews
c)
Semi Formal Reviews
d)
All of the above
33.
In ________ testing test cases i.e input to the software are created based on the specifications languages
a)
State Transition Testing
b)
Random Testing
c)
Syntax Testing
d)
Penetration testing
34.
Stochastic testing is an example of which test approach or strategy?
a)
Model-based
b)
Analytical
c)
Methodical
d)
Heuristic
35.
Verification activities during design stages are
a)
Reviewing and Inspecting
b)
Inspecting and Testing
c)
Reviewing and Testing
d)
Reviewing, Inspecting and Testing.
36.
Based on the IEEE Standard for Software test Documentation (IEEE Std 829-1998), which of the following sections is part of the test summary report?
<br>
a) Test summary and report identifier of Summary
c) Variances
d) Anomalies
e) Comprehensive assessment
f) Approvals
a)
a, b, e and f
b)
a, b, c, d and f
c)
a, b, c, e and f
d)
a, b, c and f
37.
What is the name of a temporary software component that is used to call another component for testing purposes?
a)
Domain
b)
Use case
c)
Stub
d)
Driver
38.
Size of a project is defined in terms of all the following except
a)
Person days
b)
Person hours
c)
Calendar months
d)
None of the above
39.
a)
Unit testing
b)
Algorithm specific testing
c)
Compatibility testing
d)
Black box testing
40.
Objective of review meeting is
a)
To identify problems with design
b)
To solve the problems with design
c)
Both A. and B
d)
None of the above.
100 %
