WorksheetsSAPAWS
Total questions: 65
Worksheet time: 36mins
A company is moving to the AWS Cloud gradually. The company has multiple SAP landscapes
on VMware The company already has sandbox development and QA systems on AWS The company's
production system is still running on premises. The company has 2 months to cut over the entre
landscape to the AWS Cloud The company has adopted a hybrid architecture for the next 2 months
and needs to synchronize its shared file systems between the landscapes These shared file systems
include trans directory mounts, /software directory mounts, and third-party integration mounts in
the on-premises landscape the company has NFS mounts between the servers On the AWS
infrastructure side the company is using Amazon Elastic File System (Amazon EFS) to share the
common files An SAP solutions architect needs to design a solution to schedule transfer of these
shared files bidirectional four times each day. The data transfer must be encrypted Which solution
will meet these requirements?
(A). Write an rsync script Schedule the script through cron for four times each day in the on-premises
VMware servers to transfer the data from on premises to AWS
(B). Install an AWS DataSync agent on the on-premises VMware platform Use the DataSync endpoint
to synchronize between the on-premises NFS server and Amazon EFS on AWS
(C). Order an AWS Snowcone device Use the Snowcone device to transfer data between the onpremises
servers and AWS
(D). Set up a separate AWS Direct Connect connection for synchronization between the on-premises
servers and AWS
A company wants 10 run SAP HANA on AWS m the eu-centrai-1 Region. The company must
make the SAP HANA system highly available by using SAP HANA system replication in addition the
company must create a disaster recovery (DR) solution that uses SAP HANA system replication in the
eu-west-1 Region As prerequisites the company has confirmed that inter-AZ latency is less than 1 ms
and that Inter-Region latency is greater than 1 ms.
Which solutions will meet these requirements? (Select TWO.)
(A). Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the
tier 1 system m Availability Zone 1 Configure the tier 2 system m Availability Zone 2 Configure SAP
HANA system replication between tier 1 and tier 2 by using ASYNC replication mode install the OR
tier 3 secondary system m eu-west-1 by using SYNC replication mode.
(B). Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier
1 system in Availability Zone 1 Configure the tier 2 system m Availability Zone 2 Configure SAP HANA
system replication between tier 1 and tier 2 by using SYNC replication mode Install the OR her 3
secondary system n eu-west-1 by using ASYNC replication mode.
(C). Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier
1 system in Availability Zone 1 Configure the tier 2 system in Availability Zone 2 Configure SAP HANA
system replication between tier 1 and tier 2 by using SYNC replication mode Install the OR tier 3
secondary system n eu-west-1 Store daily backups from tier 1 m an Amazon S3 bucket m eu-central-1
Use S3 Cross-Region Replication to copy the daily backups to eu-west-i where they can be restored if
needed
(D). install the tier 1 primary system in eu-central-1 install the tier 2 secondary system and the DR tier
IT Certification Guaranteed, The Easy Way!
3 secondary system m eu-west-1 Configure the tier 2 system in Availability Zone 1 Configure the tier
3 system in Availability Zone 2 Configure SAP HANA system replication between all tiers by using
ASYNC replication mode
(E). Install the tier 1 primary system and the tier 2 secondary system in eu-central-1 Configure the tier
1 system m Availability Zone 1 Configure the tier 2 system m Availability Zone 2 Configure SAP HANA
system replication between tier 1 and tier 2 by using SYNCMEM replication mode Install the DR tier 3
secondary system in eu-west-1 by using ASYNC replication mode
A company that has SAP workloads on premises plans to migrate an SAP environment to AWS.
The company is new to AWS and has no poor setup. The company has the following requirements
- The application server and database server must be placed in isolated network configurations
* SAP systems must be accessible to the on-premises end users over the internet
* The cost of communications between the application server and the database server must be
minimized Which combination of steps should an SAP solutions architect take to meet these
requirements? (Select TWO.)
(A). Configure a Network Load Balancer for incoming connections from end users
(B). Set up an AWS Site-to-Site VPN connection between the company's on-premises network and
AWS
(C). Separate the application server and the database server by using different VPCs
(D). Separate the application server and the database server by using different subnets and network
security groups within the same VPC
(E). Set up an AWS Direct Connect connection with a private VIF between the company's on-premises
network and AWS
A company is running its SAP workload on AWS The company's security team has implemented
the following requirements
* All Amazon EC2 instances for SAP must be SAP certified instance types
- Encryption must be enabled for all Amazon S3 buckets and Amazon Elastic Block Store (Amazon EBS)
volumes
* AWS CloudTrail must be activated
* SAP system parameters must be compliant with business rules
* Detailed monitoring must be enabled for all instances
The company wants to develop an automated process to review the systems for compliance with the
security team's requirements. The process also must provide notification about any deviation from
these standards Which solution will meet these requirements?
(A). Use AWS AppConfig to model configuration data in an AWS Systems Manager Automation
runbook Schedule this Systems Manager Automation runbook to monitor for compliance with all the
requirements integrate AWS AppConfig with Amazon CloudWatch for notification purposes
(B). Use AWS Config managed rules to monitor for compliance with all the requirements Use Amazon
EventBridge (Amazon CloudWatch Events) and Amazon Simple Notification Service (Amazon SNS) for
email notification when a resource is flagged as noncompliant
(C). Use AWS Trusted Advisor to monitor for compliance with all the requirements Use Trusted
Advisor preferences for email notification when a resource is flagged as noncompliant
(D). Use AWS Config managed rules to monitor for compliance with the requirements except for the
SAP system parameters Create AWS Config custom rules to validate the SAP system parameters Use
Amazon EventBridge (Amazon CloudWatch Events) and Amazon Simple Notification Sen/ice (Amazon
SNS) for email notification when a resource is flagged as noncompliant
A company has an SAP Business One system that runs on SUSE Linux Enterprise Server 12 SP3.
The company wants to migrate the system to AWS An SAP solutions architect selects a homogeneous
migration strategy that uses AWS Application Migration Service (CloudEndure Migration) After the
server migration process is finished the SAP solutions architect launches an Amazon EC2 test instance
from the R5 instance family. After a few minutes the EC2 console reports that the test instance has
failed an instance status check Network connections to the instance are refused How can the SAP
solutions architect solve this problem?
(A). Reboot the instance to initiate instance migration to another host
(B). Request an instance limit increase for the AWS Region where the test instance is being launched
(C). Create a ticket for AWS Support that documents the test server instance ID Wait for AWS to update the host of the R5 instance
(D). Install the missing drivers on the source system Wait for the completion of migration
synchronization Launch the test instance again
A company has moved an of its SAP workloads to AWS During peak business hours end users
are reporting performance issues because work processes are going into PRIV mode on an SAP
S/4HANA system An SAP support engineer indicates that SAP cannot provide support for this issue because some specific performance metrics are not available.
Which combination of actions must the company perform to comply with SAP support requirements?
(Select THREE.)
(A). Buy an SAP license from AWS Ensure that the SAP license is installed
(B). Select only an AWS Migration Acceleration Program (MAP) certified managed service provider
(MSP)
(C). Enable detailed monitoring for Amazon CloudWatch on each Amazon EC2 instance where SAP
workloads are running
(D). Install configure and run the AWS Data Provider for SAP on each Amazon EC2 instance where SAP
workloads are running
(E). integrate AWS Systems Manager with SAP Solution Manager to provide alerts about SAP
parameter configuration drift
An SAP solutions architect is designing an SAP HANA scale-out architecture for SAP Business
Warehouse (SAP BW) on SAP HANA on AWS. The SAP solutions architect identifies the design as a
three-node scale out deployment of x1e 32xlarge Amazon EC2 instances The SAP solutions architect
must ensure that the SAP HANA scale-out nodes can achieve the low-latency and high-throughput
network performance that are necessary for node-to-node communication Which combination of
steps should the SAP solutions architect take to meet these requirements? (Select TWO.)(A). Create a cluster placement group Launch the instances into the cluster placement group
(A). Create a cluster placement group Launch the instances into the cluster placement group
(B). Create a spread placement group Launch the instances into the spread placement group
(C). Create a partition placement group Launch the instances into the partition placement group
(D). Based on the operating system version verify that enhanced networking is enabled on all the
nodes
(E). Switch to a different instance family that provides network throughput that is greater than 25
Gbps
An SAP engineer has deployed an SAP S 4HANA system on an Amazon EC2 instance mat runs
Linux. The SAP license key has been installed After a white the newly installed SAP instance presents
an error that indicates that the SAP license key is not valid because the SAP system's hardware key
changed. There have been no changes to the EC2 instance or its configuration.
Which solution will permanently resolve this issue?
(A). Perform SAP kernel patching
(B). Apply a new SAP license that uses a new hardware key Install the new key
(C). Set the SUC_HW_VERSlON Linux environment variable
(D). Reboot the EC2 instance
A company is planning to deploy a new SAP NetWeaverABAP system on AWS with an Oracle
database that runs on an Amazon EC2 instance. The EC2 instance uses a Linux-based operating
system. The company needs a database storage solution that provides flexibility to adjust the IOPS
regardless of the allocated storage size.
Which solution will meet these requirements MOST cost-effectively?
(A). General Purpose SSD (gp3) Amazon Elastic Block Store (Amazon EBS) volumes
(B). Amazon Elastic File System (Amazon EFS) Standard-Infrequent Access (Standard-IA) storage class
(C). Amazon FSx for Windows File Server
(D). Provisioned IOPS SSD (io2) Amazon Elastic Block Store (Amazon EBS) volumes
A company has deployed its SAP applications into multiple Availability Zones in the same AWS
Region To accommodate storage of media files database table export and import and files dropped
by third-party tools the company has mounted Amazon Elastic File System (Amazon EFS) file systems
between the SAP instances The company needs to retrieve the files quickly for installations updates
and system refreshes Over time the EFS file systems have grown exponentially to multiple terabytes
An SAP solutions architect must optimize storage cost for the tiles that are stored in Amazon EFS.
Which solution will meet this requirement with the LEAST administrative overhead?
(A). Scan Files to identify unnecesary files delete the unnecessary files
(B). Move the files to Amazon S3 Glacier Deep Archive
(C). Apply a Lifecycle policy on the files in Amazon EFS to move the files to EFS Standard-Infrequent Access (Standard-IA)
(D). Move the files to Amazon S3 Glacier Apply an S3 Glacier vault lock policy to files
A company wants 10 migrate its SAP ERP landscape to AWS The company will use a highly
available distributed deployment for the new architecture Clients will access SAP systems from a local
data center through an AWS Site-to-Site VPN connection that is already in place An SAP solutions
architect needs to design the network access to the SAP production environment Which
configuration approaches will meet these requirements? (Select TWO.)
(A). For the ASCS instance configure an overlay IP address that is within the production VPC ClDR
range Create an AWS Transit Gateway Attach me VPN to the transit gateway Use the transit gateway
to route the communications between the local data center and the production VPC Create a static
route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS
instance
(B). For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR
range Create an AWS Transit Gateway Attach the VPN to the transit gateway Use the transit gateway
to route the communications between the local data center and the production VPC Create a static
route on the production VPC to route traffic that is directed to the overlay IP address to the ASCS
instance
(C). For the ASCS instance configure an overlay IP address that is within the production VPC ClDR
range Create a target group that points to the overlay IP address Create a Network Load Balancer and
register the target group Create a static route on the production VPC to route traffic that is directed
to the overlay IP address to the ASCS instance
(D). For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR
range Create a target group that points to the overlay IP address Create a Network Load Balancer,
and register the target group Create a static route on the production VPC to route traffic that is
directed to the overlay IP address to the ASCS instance
(E). For the ASCS instance configure an overlay IP address that is outside the production VPC ClDR
range Create a target group that points to the overlay IP address Create an Application Load Balancer
and register the target group Create a static route on the production VPC to route traffic that is
directed to the overlay IP address to the ASCS instance.
An SAP basis architect is configuring high availability for a critical SAP system on AWS. The
SAP basis architect is using an overlay IP address to route traffic to the subnets across multiple
Availability Zones within an AWS Region for the system's SAP HANA database.
What should the SAP basis architect do to route the traffic to the Amazon EC2 instance of the active
SAP HANA database?
(A). Edit the route in the route table of the VPC that includes the EC2 instance that runs SAP HANA
Specify the overlay IP address as the destination Specify the private IP address of the EC2 instance as the target.
B). Edit the inbound and outbound rules in the security group of the EC2 instance that runs SAP
HANA Allow traffic for SAP HANA specific ports from the overlay IP address
(C). Edit the network ACL of the subnet that includes the EC2 instance that runs SAP HANA Allow
traffic for SAP HANA specific ports from the overlay IP address
(D). Edit the route in the route table of the VPC that includes the EC2 instance that runs SAP HANA
Specify the overlay IP address as the destination Specify the elastic network interface of the EC2
instance as the target
A company wants to deploy an SAP HANA database on AWS by using AWS Launch Wizard for
SAP An SAP solutions architect needs to run a custom post-deployment script on the Amazon EC2
instance that Launch Wizard provisions.
Which actions can the SAP solutions architect take to provide the post-deployment script m the
Launch Wizard console? (Select TWO.)
(A). Provide the FTP URL of the script
(B). Provide the HTTPS URL of the script on a web server
(C). Provide the Amazon S3 URL of the script
(D). Write the script inline
(E). Upload the script
A company wants to migrate its on-premises servers to AWS. These servers include SAP ERP
Central Component (SAP ECC) on Oracle Database. The company is running SAP ECC application
servers and Oracle Database servers on AIX. The company must migrate the SAP workloads to AWS
with minimal changes.
Which solution will meet these requirements?
(A). Perform a heterogeneous migration for SAP on AWS Specify the SAP ECC application servers to
run on SUSE Linux Enterprise Server Specify Oracle Database to run on Oracle Enterprise Linux on a
Dedicated Host
(B). Perform a homogeneous migration for SAP on AWS Specify the SAP ECC application servers and
Oracle Database to run on AIX
(C). Perform a heterogeneous migration for SAP on AWS Specify the SAP ECC application servers and
Oracle Database to run on Oracle Enterprise Linux.
(D). Perform a heterogeneous migration for SAP on AWS Specify the SAP ECC application servers and
Oracle Database to run on Windows.
A company is planning to move all its SAP applications to Amazon EC2 instances in a VPC Recently the company signed a multiyear contract with a payroll software-as-a-service (SaaS)
provider integration with the payroll SaaS solution is available only through public web APIs.
Corporate security guidelines state that all outbound traffic must be validated against an allow list.
The payroll SaaS provider provides only fully qualified domain name (FQDN) addresses and no IP
addresses or IP address ranges Currently, an on-premises firewall appliance filters FQDNs. The
company needs to connect an SAP Process Orchestration (SAP PO) system to the payroll SaaS
provider.
What must the company do on AWS to meet these requirements?
(A). Add an outbound rule to the security group of the SAP PO system to allow the FODN of the
payroll SaaS provider and deny all other outbound traffic
(B). Add an outbound rule to the network ACL of the subnet that contains the SAP PO system to allow
the FQDN of the payroll SaaS provider and deny all other outbound traffic
(C). Add an AWS WAF web ACL to the VPC Add an outbound rule to allow the SAP PO system to
connect to the FQDN of the payroll SaaS provider
(D). Add an AWS Network Firewall firewall to the VPC Add an outbound rule to allow the SAP PO
system to connect to the FQDN of the payroll SaaS provider.
A company needs to implement high availability for its SAP S 4HANA system on AWS The
company will use a SUSE Linux Enterprise Server clustering solution in private subnets across two
Availability Zones An SAP solutions architect must ensure that the solution can route traffic to the
active SAP instance m this clustered configuration.
What should the SAP solutions architect do to meet these requirements?
(A). Implement the SAP cluster solution by using a secondary private IP address Reassign the
secondary private IP address from one network interface to another network interface in the event of
any failure that affects the primary instance.
(B). Implement the SAP cluster solution by using an Elastic IP address Mask the failure of an instance
or software by rapidly remapping the address to another instance in the account
(C). Implement the SAP duster solution by using a public IP address Use this public IP address for
communication between the instances and the internet
(D). implement the SAP duster solution by using an overlay IP address that is outside the CIDR block
of the VPC Use overlay IP address routing to dynamically update the route table to point to the active
node and provide external access by using a Network Load Balancer or AWS Transit Gateway.
A company plans to migrate its SAP NetWeaver deployment to AWS. The deployment runs on
a Microsoft SQL Server database. The company plans to change the source database from SQL Server
to SAP HANA as part of this process.
Which migration tools or methods should an SAP solutions architect use to meet these
requirements'' (Select TWO. )
(A). SAP HANA classical migration
(B). SAP HANA system replication
(C). SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move
(D). SAP HANA backup and restore
(E). SAP homogeneous system copy
An SAP solutions architect is using AWS Systems Manager Distributor to install the AWS Data
Provider for SAP on production SAP application servers and SAP HANA database servers The SAP
application servers and the SAP HANA database servers are running on Red Hat Enterprise Linux.
The SAP solutions architect chooses instances manually m Systems Manager Distributor and
schedules installation. The installation fails with an access and authorization error related to Amazon
CloudWatch and Amazon EC2 instances. There is no error related to AWS connectivity.
What should the SAP solutions architect do to resolve the error?
(A). Install the CloudWatch agent on the servers before installing the AWS Data Provider tor SAP
(B). Download the AWS Data Provider for SAP installation package from AWS Marketplace Use an
operating system super user to install the agent manually or through a script
(C). Create an IAM role Attach the appropriate policy to the role Attach the role to the appropriate
EC2 instances
(D). Wait until Systems Manager Agent is fully installed and ready to use on the EC2 instances Use
Systems Manager Patch Manager to perform the installation
A company has deployed SAP workloads on AWS The AWS Data Provider for SAP is installed
on the Amazon EC2 instance where the SAP application is running An SAP solutions architect has
attached an IAM role to the EC2 instance with the following policy.
The AWS Data Provider for SAP is not returning any metrics to the SAP application. Which change
should the SAP solutions architect make to the 1AM permissions to resolve this issued.
(A). Add the cloudwatch ListMetrics action to the policy statement with Sid AWSDataProvider1
(B). Add the cloudwatch GetMetricStatrstics action to the policy statement with Sid
AWSDataProvider1
(C). Add the cloudwatch GetMetricStream action (o the policy statement with Sid AWSDataProvider
(D). Add the cloudwatch DescribeAlarmsForMetric action to the policy statement with Sid
AWSDataProvider
A company is hosting an SAP HANA database on AWS. The company is automating operational tasks including backup and system refreshes. The company wants to use SAP HANA
Studio to perform data backup of an SAP HANA tenant database to a backint interface. The SAP
HANA database is running in multi-tenant database container (MDO mode. The company receives the
following error message during an attempt to perform the backup. What should an SAP solutions architect do to resolve this issue?
(A). Set the execute permission for AWS Backint agent binary aws-backint-agent and for the launcher
script aws-backint-agent-launcher sh in the installation directory
(B). Verify the installation steps Create symbolic links (symlinks)
(C). Ensure that the cataiog_backup_using_backint SAP HANA parameter is set to true Ensure that
the data_backup_parameter_file and log_backup_parameter_file parameters have the correct path
location in the global ini file
Add the SAP HANA system to SAP HANA Studio Select multiple container mode and then try to
initiate the backup again
A company is planning to migrate its on-premises SAP ERP Central Component (SAP ECC)
system on SAP HANA to AWS Each month the system experiences two peaks in usage. The first peak
is on the 21st day of the month when the company runs payroll. The second peak is on the last day of
the month when the company processes and exports credit data Both peak workloads are of high
importance and cannot be rescheduled The current SAP ECC system has six application servers an of
a similar size. During normal operation outside of peak usage four application servers would suffice
Which purchasing option will meet the company's requirements MOST cost-effectively on AWS?
(A). Four Reserved Instances and two Spot Instances
(B). Six On-Demand Instances
(C). Six Reserved Instances
(D). Four Reserved Instances and two On-Demand Instances
A company uses an SAP application that runs batch jobs that ate performance sensitive. The
batch jobs can be restarted safely The SAP application has sot application servers. The SAP
application functions reliability as long as the SAP application availability remains greater than 60%.
The company wants to migrate the SAP application to AWS. The company is using a duster with two
Availability Zones How should the company distribute the SAP application servers to maintain system
reliability?
(A). Distribute the SAP application servers equally across three partition placement groups
(B). Distribute the SAP application servers equally across three Availability Zones
Distribute the SAP application servers equally across two Availability Zones
Create an Amazon EC2 Auto Scaling group across two Availability Zones Set a minimum capacity
value of 4.
A company is planning to migrate its on-premises SAP applications to AWS. The applications
are based on Windows operating systems A file share stores the transport directories and third party
application data on the network attached storage of the company's on-premises data center. The
company's plan is to lift and shift the SAP applications and the file share to AWS. The company must
follow AWS best practices for the migration Which AWS service should the company use to host the
transport directories and third-party application data on AWS?
(A). Amazon Elastic Block Store (Amazon EBS)
(B). AWS Storage Gateway
(C). Amazon Elastic File System (Amazon EFS)
(D). Amazon FSx for Windows File Server
A company is running an SAP HANA database on AWS. The company wants to manage
historical infrequently accessed warm data for a native SAP HANA use case An SAP solutions architect
needs to recommend a solution that can provide online data storage m extended store available for
queries and updates.
The solution must be an integrated component of the SAP HANA database and must allow the
storage of up to five limes more data in the warm tier than in the not tier Which solution will meet
these requirements?
(A). Use Amazon Data lifecycle Manager (Amazon DLM) with SAP Data Hub to move data in and out
of the SAP HANA database to Amazon S3
(B). Use an SAP HANA extension node
(C). Use SAP HANA dynamic tiering as an optional add-on to the SAP HANA database
(D). Use Amazon Data Lifecycle Manager (Amazon DLM) with SAP HANA spark controller so that SAP
HANA can access the data through the Spark SQL SDA adapter
A company wants to migrate its SAP landscape from on premises to AWS
What are the MINIMUM requirements that the company must meet to ensure full support of SAP on
AWS?
(Select THREE.)
(B). Deploy the infrastructure by using SAP Cloud Appliance Library
(C). Install configure and run the AWS Data Provider for SAP on each instance m the landscape
(D). Protect all production instances by using Amazon EC2 automatic recovery
(E). Deploy the infrastructure for the SAP landscape by using AWS Launch Wizard for SAP
Deploy the SAP landscape on an AWS account that has either an AWS Business Support plan or an
AWS Enterprise Support plan
A company is running an SAP HANA database on AWS The company is running AWS Backint
Agent for SAP HANA(AWS Backint agent) on an Amazon EC2 instance AWS Back agent is configured to
back up to an Amazon S3 bucket The backups are failing with an Access Denied error m the AWS
Backint agent log file.
What should an SAP basis administrator do to resolve this error?
(A). Assign execute permissions at the operating system level for the AWS Backint agent binary and
for AWS Backint agent
(B). Assign an IAM role to an EC2 instance Attach a policy to the IAM role to grant access to the target
S3 bucket
(C). Assign the correct Region ID for the S3BucketAwsRegion parameter in AWS Backint agent for the
SAP HANA configuration file
(D). Assign the value for the Enable Tagging parameter in AWS Backint agent for the SAP HANA
configuration file
A company is running SAP ERP Central Component (SAP ECC) with a Microsoft SQL Server
database on AWS A solutions architect must attach an additional 1 TB Amazon Elastic Block Store
(Amazon EBS) volume. The company needs to write the SQL Server database backups to this EBS
volume before moving the database backups to Amazon S3 for long-term storage.
Which EBS volume type will meet these requirements MOST cost-effectively?
(A). Throughput Optimized HDD (st1)
(B). Provisioned IOPS SSD (io3)
(C). General Purpose SSD (gp3)
(D). Cold HDD (sc1)
A company is planning to migrate its on-premises SAP application to AWS. The application
runs on VMware vSphere The SAP ERP Central Component (SAP ECC) server runs on an IBM Db2
database that is 2 TB m size The company wants to migrate the database to SAP HANA Which
migration strategy will meet these requirements'?
(A). Use AWS Application Migration Service (CloudEndure Migration)
(B). Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move
(C). Use AWS Server Migration Service (AWS SMS)
(D). Use AWS Database Migration Service (AWS DMS)
An SAP solutions architect is leading the SAP basis team for a company. The company's SAP
landscape includes SAP HANA database instances for the following systems sandbox development
quality assurance test
{QAT} system performance test (SPT) and production. The sandbox development and OAT systems
are running on Amazon EC2 On-Demand Instances. The SPT and production systems are running on
EC2 Reserved Instances All the EC2 instances are using Provisioned IOPS SSO (K)2) Amazon Elastic
Block Store (Amazon EBS) volumes.
The entire development learn is in the same time zone and works from 8 AM to 6 PM. The sandbox
system is for research and testing that are not critical. The SPT and production systems are business
critical The company runs load-testing jobs and stress-testing jobs on the QAT systems overnight to
reduce testing duration. The company wants to optimize infrastructure cost for the existing AWS
resources.
How can the SAP solutions architect meet these requirements with the LEAST amount of
administrative effort?
(A). Use a Spot Fleet instead of the Reserved Instances and On-Demand Instances
(B). Use Amazon EventBridge (Amazon CloudWatch Events) and Amazon CloudWatch alarms to stop
the development and sandbox EC2 instances from 7 PM every night to 7 AM the next day
(C). Make the SAP basis team available 24 hours a day 7 days a week to use the AWS CLi to stop and
start the development and sandbox EC2 instances manually
(D). Change the EBS volume type to Throughput Optimized HDD (sti) for the /hana/data and nana, log
file systems for the production and non-production SAP HANA databases
A company is running its SAP workloads on premises and needs to migrate the workloads to
AWS All the workloads are running on SUSE Linux Enterprise Server and Oracle Database. The
company's landscape consists of SAP ERP Central Component {SAP ECC). SAP Business Warehouse
(SAP BW), and SAP NetWeaver systems. The company has a dedicated AWS Direct Connect connection between its on-premises environment and AWS The company needs to migrate the
systems to AWS with the least possible downtime Which migration solution will meet these
requirements?
(A). Use SAP Software Provisioning Manager to perform an export of the systems Copy the export to
Amazon S3 Use SAP Software Provisioning Manager to perform an import of the systems to SUSE
Linux Enterprise Server and Oracle Database on AWS
(B) Use SAP Software Provisioning Manager to perform para export of the systerns to migrate the systems to SUSE Linux Enterprise Svetla batatase on AWS
(C). Use SAP Software Proys ingeron pairaled exportimport of the systems to migrate the systems to Orate Enterprise Linux and Oracle Database on AWS
(D). Use SAP Software Provisioning Manager to perform an export of the systems Copy the export to
Amazon S3 Use SAP Software Provisioning Manager to perform an import of the systems to Oracle
Enterprise Linux and Oracle Database on AWS.
A company is planning to migrate its SAP workloads to AWS. The company will use two VPCs
One VPC will be for production systems and one VPC will be for non-production systems. The
company will host the non-production systems and the primary node of all the production systems in
the same Availability Zone.
What is the MOST cost-effective way to establish a connection between me production systems and
the non-production systems?
(A). Create an AWS Transit Gateway Attach the VPCs to the transit gateway Add the appropriate
routes m the subnet route tables
(B). Establish a VPC peering connection between the two VPCs Add the appropriate routes in the
subnet route tables
(C). Create an internet gateway in each VPC Use an AWS Site-to-Site VPN connection between the
two VPCs Add the appropriate routes in the subnet route tables
(D). Set up an AWS Direct Connect connection between the two VPCs Add the appropriate routes in
the subnet route tables
A data analysis company has two SAP landscapes that consist of sandbox development QA,
pre-production and production servers. One landscape is on Windows and the other landscape is on
Red Hat Enterprise Linux.
The servers reside in a room m a building that other tenants share.
An SAP solutions architect proposes to migrate the SAP applications to AWS The SAP solutions
architect wants to move the production backups to AWS and wants to make the backups highly
available to restore >n case of unavailability of an on-premises server.
Which solution will meet these requirements MOST cost-effectively?
(A). Take a backup of the production servers Implement an AWS Storage Gateway Volume Gateway
Create file shares by using the Storage Gateway Volume Gateway Copy the backup files to the file
shares through NFS and 9MB.
(B). Take a backup of the production servers Send those backups to tape drives implement an AWS
Storage Gateway Tape Gateway Send the backups to Amazon S3 Standard-Infrequent Access (S3
Standard-IA) through the S3 console Move the backups immediately to S3 Glacier Deep Archive
(C). Implement a third-party tool to take images of the SAP application servers and database server
Take regular snapshots at 1-hour intervals send the snapshots to Amazon S3 Glacier directly through
the S3 Glacier console Store the same images in different S3 buckets in different AWS Regions
(D). Take a backup of the production servers Implement an Amazon S3 File Gateway Create file
shares by using the S3 File Gateway Copy the backup files lo the file shares through NFS and SMB
Map backup files directly to Amazon S3 Configure an S3 Lifecycle policy to send the backup files to S3
Glacier based on the company's data retention policy
A company is running its SAP applications on Oracle Database Oracle Database is hosted on
physical servers that are running SUSE Linux Enterprise Server Because of compliance requirements
the company cannot install any additional software on its on premises database servers. The
company needs to migrate the SAP landscape to AWS and must continue to use Oracle Database.
Which migration solution should the company use to meet these requirements?
(A). AWS Server Migration Service (AWS SMS)
(B). AWS Application Migration Service (CloudEndure Migration)
(C). SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move
(D). Oracle Database replication with Oracle Data Guard
A company has deployed a highly available SAP NetWeaver system on SAP HANA into a VPC
The system is distributed across multiple Availability Zones within a single AWS Region SAP
NetWeaver is running on SUSE Linux Enterprise Server for SAP SUSE Linux Enterprise High Availability
Extension is configured to protect SAP ASCS and ERS instances and uses the overlay IP address
concept The SAP shared dies sapmnt and . usrsap. trans are hosted on an Amazon Elastic File System
(Amazon EFS) tile system The company needs a solution that uses already-existing private
connectivity to the VPC. The SAP NetWeaver system must be accessible through the SAP GUI client
tool.
Which solutions will meet these requirements? (Select TWO)
(A). Deploy an Application Load Balancer Configure the overlay IP address as a target
(B). Deploy a Network Load Balancer Configure the overlay IP address as a target
(C). Use an Amazon Route 53 private zone Create an A record that has the overlay IP address as a
target
(D). Use AWS Transit Gateway Configure the overlay IP address as a static route in the transit
gateway route table Specify the VPC as a target
(E). Use a NAT gateway Configure the overlay IP address as a target
A company is running SAP on anyDB at a remote location that has slow and inconsistent
internet connectivity.
The company wants to migrate its system to AWS and wants to convert its database to SAP HANA
during this process Because of the inconsistent internet connection the company has not established
connectivity between the remote location and the company's VPC in the AWS Cloud.
How should the company perform this migration?
(A). Migrate by using SAP HANA system replication over the internet connection Specify a public IP
address on the target system
(B). Migrate by using SAP Software Update Manager (SUM) Database Migration Option (DMO) with
System Move Use an AWS Snowball Edge Storage Optimized device to transfer the SAP export files to
AWS
(C). Migrate by using SAP HANA system replication with initialization through backup and restore Use
an AWS Snowball Edge Storage Optimized device to transfer the SAP export files to AWS
(D). Migrate by using SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move Use Amazon Elastic File System (Amazon EPS) to transfer the SAP export files to AWS
Business users are reporting timeouts during periods of peak query activity on an enterprise
SAP HANAdata mart An SAP system administrator has discovered that at peak volume the CPU
utilization increases rapidly to
100% for extended periods on the x1.32xlarge Amazon EC2 instance where the database is installed
However the SAP HANA database is occupying only 1 120 GiB of the available 1 952 GiB on the
instance 10 wart times are not increasing Extensive query tuning and system tuning have not
resolved this performance problem Which solutions should the SAP system administrator use to
improve the performance? (Select TWO.)
(A). Reduce the global_allocation_limit parameter to i 120 GiB
(B). Migrate the SAP HANA database to an EC2 High Memory instance with a larger number of
available vCPUs
(C). Move to a scale-out architecture for SAP HANA with at least three x1 16xlarge instances
(D). Modify the Amazon Elastic Block Store (Amazon EBS) volume type from General Purpose to
Provisioned lOPS for ail SAP HANA data volumes
(E). Change to a supported compute optimized instance type for SAP HANA
A company needs to migrate its critical SAP workloads from an on-premises data center to
AWS The company has a few source production databases that are 10 TB or more in size The
company wants to minimize the downtime for this migration As part of the proof of concept the
company used a low-speed high-latency connection between its data center and AWS During the
actual migration the company wants to maintain a consistent connection that delivers high
bandwidth and low latency. The company also wants to add a layer of connectivity resiliency. The
backup connectivity does not need to be as fast as the primary connectivity An SAP solutions
architect needs to determine the optimal network configuration for data transfer. The solution must
transfer the data with minimum latency Which configuration will meet these requirements?
(A). Set up one AWS Direct Connect connection for connectivity between the on-premises data
center and AWS Add an AWS Site-to-Site VPN connection as a backup to the Direct Connect
connection
(B). Set up an AWS Direct Connect gateway with multiple Direct Connect connections that use a link
aggregation group (LAG) between the on-premises data center and AWS
(C). Set up Amazon Elastic fie System (Amazon EPS) file system storage between the on-premises
data center and AWS Configure a cron job to copy the data into this EFS mount Access the data in the
EFS file system from the target environment
(D). Set up two redundant AWS Site-to-Site VPN connections for connectivity between the onpremises
data center and AWS
A company's SAP basis team is responsible for database backups in Amazon S3. The company
frequently needs to restore the last 3 months of backups into the pre-production SAP system to
perform tests and analyze performance. Previously an employee accidentally deleted backup files
from the S3 bucket. The SAP basis team wants to prevent accidental deletion of backup files in the
future.
Which solution will meet these requirements?
(A). Create a new resource-based policy that prevents deletion of the S3 bucket
(B). Enable versioning and multi-factor authentication (MFA) on the S3 bucket
(C). Create signed cookies for the backup files in the S3 bucket Provide the signed cookies to
authorized users only
(D). Apply an S3 Lifecycle policy to move the backup fries immediately to S3 Glacier
A company is migrating its SAP workloads to AWS The company's IT team installs a highly
available SAP
S.4HANA system that uses the SAP HANA system replication cluster package on SUSE Linux Enterprise
Server. The IT team deploys the system by using cluster nodes m different Availability Zones within
the same AWS Region.
After the initial launch of the SAP application the application is accessible However after failover the
IT team cannot access the application even though the system is up and running on the secondary
node After investigation an SAP solutions architect discovers that the virtual IP address has not been
used correctly Which combination of steps should the SAP solutions architect take to resolve this
problem? (Select TWO.)
(A). Use an overlay IP address as a secondary IP address with the primary node of the cluster
(B). Choose an overlay IP address within the VPC CiDR block that corresponds with the secondary
node of the cluster
(C). Use an overlay IP address as a virtual IP address
(D). Choose an overlay IP address within the VPC CIDR block that corresponds with the primary node
of the cluster
(E). Choose an overlay IP address outside the VPC CiDR block that hosts the application and the
database
A financial services company is implementing SAP core banking on AWS. The company must
not allow any system information to traverse the public internet. The company needs to implement
secure monitoring of its SAP ERP Central Component (SAP ECO system to check for performance
issues and faults in its application.
The solution must maximize security and must be supported by SAP and AWS.
How should be company integrate AWS metrics with its SAP system to meet these requirements?
(A). Set up SAP Solution Manager to call Amazon CoudWatch and Amazon EC2 endpoints with REST- based calls to populate SAPOSCOL details Use SAP transaction STO6N to monitor CPU and memory utilization on each EC2 instance
Install the AWS Data Provider for SAP on the Amazon EC2 instances that host SAP Allow access
to the Amazon CloudWatch and EC2 endpoints through a NAP gateway Create an IAM policy that
allows the ec2 Describeinstances action the cloudwatch GelMetricStatistics action and the ec2 DescribeVolumes action for all EC2 resources
(C). Install the AWS Data Provider for SAP on the Amazon EC2 instances that host SAP Create VPC endpoints for Amazon CloudWatch and Arazon EC2 Allow access through these endpoints Create an IAM policy that allows the ec2 Deserba jostances action the cloudwatch GetMemcStatistics action and
the ec2 DescribeVolumes action all EC2 resources.
(D), install the AWS data Provider for SAP on the Amazon EC2 instances that host SAP Create VPC
endpoints for Amazon CloudWatch and Amazon EC2 Allow access through these endpoints Create an
IAM policy that allows all actions for all EC2 resources.
A company wants to improve the RPO and RTO for its SAP disaster recovery (DR) solution by
running the DR solution on AWS The company is running SAP ERP Central Component (SAP ECO on
SAP HANA The company has set an RPO of 15 minutes and an RTO of 4 hours.
The production SAP HANA database is running on a physical appliance that has x86 architecture. The
appliance has 1 TB of memory and the SAP HANA global allocation limit is set to 768 GB. The SAP
application servers are running as VMs on VMware and they store data on an NFS file system The
company does not want to change any existing SAP HANA parameters that are related to data and
log backup for its on-premises systems.
What should an SAP solutions architect do to meet the DR objectives MOST cost-effectively?
(A). For the SAP HANA database change the log backup frequency to 5 minutes Move the data and
log backups to Amazon S3 by using the AWS CLI or AWS DataSync Launch the SAP HANA database For
the SAP application servers, export the VMs as AMis by using the VM import/Export feature from
AWS For NFS file shares/sapmnt and usr-sap/trans/ establish real-time synchronization from
DataSync to Amazon Elastic File System (Amazon EFS)
(B). For the SAP HANA database change the log backup frequency to 5 minutes Move the data and
log backups to Amazon S3 by using AWS Storage Gateway File Gateway For the SAP application
servers export the VMs as AMIs by using the VM Import'Export feature from AWS For NFS file shares
/sapmnt and 'usr saplrans establish realtime synchronization from AWS DataSync to Amazon Elastic
Foe System (Amazon EFS)
(C). For the SAP HANA database SAP application servers and NFS Me shares use CloudEndure Disaster
Recovery to replicate the data continuously from on premises to AWS Use CloudEndure Disaster
Recovery to launch target instances in the event of a disaster
(D). For the SAP HANA database use a smaller SAP certified Amazon EC2 instance Use SAP HANA
system replication with ASYNC replication mode to replicate the data continuously from on premises to AWS For the SAP application servers use CloudEndure Disaster Recovery for continuous data
replication For NFS file shares sapmnt and .'uv-sap'trans. establish real-time synchronization from
AWS DataSync to Amazon Elastic File System (Amazon EFS)
A company is running an SAP ERP Central Component (SAP ECC) system on an SAP HANA
database that is
10 TB m size The company rs receiving notifications about long-running database backups every day
The company uses AWS Backint Agent for SAP HANA (AWS Backint agent) on an Amazon EC2 instance
to back up the database An SAP NetWeaver administrator needs to troubleshoot the problem and
propose a solution Which solution will help resolve this problem'?
(A). Ensure mat AWS Backint agent is configured to send the backups to an Amazon S3 bucket over
the internet Ensure that the EC2 instance is configured to access the internet through a NAT gateway
(B). Check the UploadChanneiSize parameter for AWS Backint agent increase this value in the awsbackint-
agent-config yaml configuration file based on the EC2 instance type and storage
configurations
(C). Check the MaximumConcurrentFilesForRestore parameter tor AWS Backint agent Increase the
parameter from 5 to 10 by using the aws-backint-agent-config yaml configuration file
(D). Ensure that the backups are compressed if necessary configure AWS Backint agent to compress
the backups and send them to an Amazon S3 bucket
A company has an SAP environment that runs on AWS. The company wants to enhance
security by restricting Amazon EC2 Instance Metadata Service (IMDS) to IMDSv2 only. The company's
current configuration option supports both iMDSvi and iM0Sv2. The security enhancement must not
create an SAP outage.
What should the company do before it applies the security enhancement on EC2 instances that are
running the SAP environment?
(A). Ensure that the SAP kernel versions are 7.45 or later
(B). Ensure that the EC2 instances are Nitro based
(C). Ensure that the AWS Data Provider for SAP is installed on each EC2 instance
(D). Stop the EC2 instances
A company is implementing SAP HANA on AWS According 10 the company's security policy
SAP backups must be encrypted Only authorized team members can have the ability to decrypt the
SAP backups What is the MOST operationally efficient solution that meets these requirements?
(A). Configure AWS Backint Agent for SAP HANA to create SAP backups in an Amazon S3 bucket After
a backup is created encrypt the backup by using client-side encryption Share the encryption key with
authorized team members only
(B). Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for
SAP backups Create a key policy to grant decryption permission to authorized team members only
(C). Configure AWS Storage Gateway to transfer SAP backups from a file system to an Amazon S3
bucket Use an S3 bucket policy to grant decryption permission to authorized team members only
(D). Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for
SAP backups Grant object ACL decryption permission to authorized team members only
A company is planning to move its on-premises SAP HANA database to AWS. The company
needs to migrate this environment to AWS as quickly as possible An SAP solutions architect will use
AWS Launch Wizard for SAP to deploy this SAP HANA workload.
Which combination of steps should the SAP solutions architect follow to start the deployment of this
workload on AWS? (Select THREE.)
(A). Download the SAP HANA software
(B). Download the AWS CloudFormation template for the SAP HANA deployment
(C). Download and extract the SAP HANA software upload the SAP HANA software to an FTP server
that Launch Wizard can access
(D). Upload the unextracted SAP HANA software to an Amazon S3 destination bucket Follow the S3
file path syntax for the software in accordance with Launch Wizard recommendations
(E). Bring the operating system AMI by using the Bring. Your Own Image (BYOI) model or purchase
the subscription for the operating system AMI from AWS Marketplace
A company is running an SAP on Oracle system on IBM Power architecture in an on-premises data center. The company wants to migrate the SAP system to AWS. The Oracle database is 15 TB n size The company has set up a 100 Gbps AWS Direct Connect connection to AWS from the on-premises data center.
Which solution should the company use to migrate the SAP system MOST quickly?
(A). Before the migration window build a new installation of the SAP system on AWS by using SAP
Software Provisioning Manager. During the migration window export a copy of the SAP system and
database by using the heterogeneous system copy process and R3load Copy the output of the SAP
system files to AWS through the Direct Connect connection import the SAP system to the new SAP
installation on AWS Switch over to the SAP system on AWS
(B). Before the migration window build a new installation of the SAP system on AWS by using SAP
Software Provisioning Manager Back up the Oracle database by using native Oracle tools Copy the
backup of the Oracle database to AWS through the Direct Connect connection Import the Oracle
database to me SAP system on AWS Configure Oracle Data Guard to begin replication on-premises
database log changes from the SAP system to the new AWS system During the migration window use
Oracle to replicate any remaining changes to the Oracle database hosted on AWS Switch over to the
SAP system on AWS
(C). Before the migration window build a new installation of the SAP system on AWS by using SAP
Software Provisioning Manager Create a staging Oracle database on premises to perform Cross
Platform Transportable Tablespace (XTTS) conversion on the Oracle database Take a backup of the
convened staging database Copy the converted backup to AWS through the Direct Connect
connection import the Oracle database backup to the SAP system on AWS Take regularly scheduled
incremental backups and XTTS conversions of the staging database Transfer these backups and
conversions to the AWS target database During the migration window, perform a final incremental
Oracle backup Convert the final Oracle backup by using XTTS Replay the logs in the target Oracle
database hosted on AWS Switch over to the SAP system on AWS
(D). Before the migration window launch an appropriately sized Amazon EC2 instance on AWS to
receive the migrated SAP database Create an AWS Server Migration Service (AWS SMS) job to take
regular snapshots of the on-premises Oracle hosts Use AWS SMS to copy the snapshot as an AMI to
AWS through the Direct Connect connection Create a new SAP on Oracle system by using the
migrated AMI During the migration window take a final incremental SMS snapshot and copy the
snapshot to AWS Restart the SAP system by using the new up-to-date AMI Switch over to the SAP
system on AWS
A company runs its SAP ERP 6 0 EHP 8 system on SAP HANAon AWS The system is deployed
on an r4 I6xlarge Amazon EC2 instance with default tenancy. The company needs to migrate the SAP
HANA database to an x2gd/.6xiarge High Memory instance After an operations engineer changes the
instance type and starts the instance the AWS Management Console shows a failed instance status
check What is the cause of this problem?
(A). The operations engineer missed the network configuration step during the post-migration
activities
(B). The operations engineer missed the Amazon CloudWatch configuration step during the postmigration
activities.
(C). The operations engineer did not install Elastic Network Adapter (ENA) drivers before changing
the instance type
(D). The operations engineer did not create a new AMI from the original instance and did not launch
a new instance with dedicated tenancy from the AMI
A company hosts an SAP HANA database on an Amazon EC2 instance in the us-easi-1 Region.
The company needs to implement a disaster recovery (DR) site in the us-west-1 Region. The company
needs a cost-optimized solution that offers a guaranteed capacity reservation an RPO of less than 30
minutes and an RTO of less than 30 minutes.
When solution will meet these requirements?
(A). Deploy a single EC2 instance to support the secondary database in us-west with additional
storage Use this secondary database instance to support QA and production Configure the primary
SAP HANA database in us-east-1 to constantly replicate the data to the secondary SAP HANA
database in us-west-t by using SAP HANA system replication with preload off During DR shut down
the QA SAP HANA instance and restart the production services at the secondary site
(B). Deploy a secondary staging server on an EC2 instance in us-west-1 Use CloudEndure Disaster
Recovery to replicate changes at the database level from us-east-1 to the secondary staging server on
an ongoing basis During DR, initiate cutover increase the size of the secondary EC2 instance to match
the primary EC2 instance and start the secondary EC2 instance
(C). Set up the primary SAP HANA database in us-east-1 to constantly replicate the data to a
secondary SAP HANA database in us-west-1 by using SAP HANA system replication with preload on
Keep the secondary SAP HANA instance as a hot standby that is ready to take over in case of failure
(D). Create an SAP HANA database AMI by using Amazon Elastic Block Store (Amazon EBS) snapshots Replicate the database and log backup files from a primary Amazon S3 bucket in us-east-1 to a
secondary S3 bucket m us-west-1 During DR launch the EC2 instance in us-west-1 based on AMIs that
are replicated Update host information Download database and log backups from the secondary S3
bucket Perform a point-in-time recovery
A company has deployed SAP HANA m the AWS Cloud. The company needs its SAP HAN A
database to be highly available An SAP solutions architect has deployed the SAP HANA database in
separate Availability Zones in a single AWS Region SUSE Linux Enterprise High Availability Extension is
configured with an overlay IP address. The overlay IP resource agent has the following IAM policy:
During a test of failover the SAP solutions architect finds that the overlay IP address does not change
to the secondary Availability Zone Which change should the SAP solutions architect make in the
policy statement for Sid oip1 to dx this error1?
(A). Change the Action element to ec2 CreateRoute
(B). Change the Action element to ec2 ReplaceRoute
(C). Change the Action element to ec2 ReplaceRouteTableAssociation
(D). Change the Action element to ec2 ReplaceTransrtGatewayRoute
A global enterprise is running SAP ERP Central Component (SAP ECC) workloads on Oracle in
an on-premises environment. The enterprise plans to migrate to SAP S 4HANA on AWS.
The enterprise recently acquired two other companies One of the acquired companies is running SAP
ECC on Oracle as its ERP system The other acquired company is running an ERP system that is not
from SAP The enterprise wants to consolidate the three ERP systems into one ERP system on SAP S4HANA on AWS Not all the data from the acquired companies needs to be migrated to the final ERP
system The enterprise needs to complete this migration with a solution that minimizes cost and
maximizes operational efficiency.
Which solution will meet these requirements?
(A). Perform a lift-and-shift migration of all the systems to AWS Migrate the ERP system that is not
from SAP to SAP ECC Convert all three systems to SAP S/4HANA by using SAP Software Update
Manager (SUM) Database Migration Option (DMO) Consolidate all three SAP S4HANA systems into a
final SAP &4HANAsystem Decommission the other systems
(B). Perform a lift-and-shift migration of an the systems to AWS Migrate the enterprise's initial system
to SAP HANA, and then perform a conversion to SAP S/4HANA Consolidate the two systems from the
acquired companies with this SAP S4HANA system by using the Selective Data Transition approach
with SAP Data Management and Landscape Transformation (DMLT)
(C). Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move
to re-architect the enterprise initial system to SAP S'4HANA and to change the platform to AWS
Consolidate the two systems from the acquired companies with this SAP S 4HANA system by using
the Selective Data Transition approach with SAP Data Management and Landscape Transformation
(DMLT)
(D). Use SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move
to re-architect all the systems to SAP S/4HANA and to change the platform to AWS Consolidate all
three SAP S-4HANA systems two a final SAP S/4HANA system Decommission the other systems
A company hosts multiple SAP applications on Amazon EC2 instances in a VPC While
monitoring the environment the company notices that multiple port scans are attempting to connect to SAP portals inside the VPC. These port scans are originating from the same IP address block. The company must deny access to the VPC from all the offending IP addresses for the next 24 hours. Which solution win meet this requirement?
(A). Modify network ACLs that are associated with all public subnets in the VPC to deny access from
the IP address block
(B). Add a rule in the security group of the EC2 instances to deny access from the IP address block
(C). Create a policy in AWS identity and Access Management (1AM) to deny access from the IP
address block
(D). Configure the firewall m the operating system of the EC2 instances to deny access from the IP
address block
A company is using a multi-account strategy for SAP HANA and SAP BW 4HANA instances
across development QA and production systems m the same AWS Region Each system is hosted m its
own VPC The company needs to establish cross-VPC communication between the SAP systems.
The company might add more SAP systems m the future. The company must create connectivity
across the SAP systems and hundreds of AWS accounts. The solution must maximize scalability and
reliability.Which solution will meet these requirements?
(A). Create an AWS Transit Gateway in a central networking account Attach the transit gateway to the
AWS accounts Set up routing and a network ACL to establish communication
(B). Set up VPC peering between the accounts Configure routing in each VPC to use the VPC peering
links
(C). Create a transit VPC that uses the hub-and-spoke model set up routing to use the transit VPC for
communication between the SAP systems
Create a VPC link for each SAP system Use the VPC links to connect the SAP systems
A company hosts its SAP NetWeaver workload on SAP HANA m the AWS Cloud The SAP
NetWeaver application is protected by a cluster solution that uses Red Hat Enterprise Linux High
Availability Add-On The duster solution uses an overlay IP address to ensure that the high availability cluster is still accessible during failover scenarios.
An SAP solutions architect needs to facilitate the network connection to this overlay IP address from
multiple locations These locations include more than 25 VPCs other AWS Regions and the onpremises
environment The company already has set up an AWS Direct Connect connection between the on-premises environment and AWS.
What should the SAP solutions architect do to meet these requirements in the MOST scalable manner?
(A). Use VPC peering between the VPCs to route traffic between them
(B). Use AWS Transit Gateway to connect the VPCs and on-premises networks together
(C). Use a Network Load Balancer to route connections to various targets within VPCs
(D). Deploy a Direct Connect gateway to connect the Direct Connect connection over a private VIF to
one or more VPCs in any accounts
A company wants to implement SAP HANAonAWS with the Multi-AZ deployment option by
using AWS Launch Wizard for SAP The solution will use SUSE Linux Enterprise High Availability
Extension for the high availability deployment An SAP solutions architect must ensure that all the
prerequisites are met The SAP solutions architect also must ensure that the user inputs to start the
guided deployment of Launch Wizard are valid.
Which combination of steps should the SAP solutions architect take to meet these requirements?
(Select TWO)
(A). Before starting the Launch Wizard deployment create the underlying Amazon Elastic Block Store
(Amazon EBS) volume types to use for SAP HANA data and log volumes based on the performance
requirements
(B). Use a value for the PaceMakerTag parameter that is not used by any other Amazon EC2 instances
in the AWS Region where the system is being deployed
(C). Ensure that the virtual hostname for the SAP HANA database that is used for the SUSE Linux
Enterprise High Availability Extension configuration is not used in any other deployed accounts
(D). Ensure that the Virtual Address parameter is outside the VPC CIDR and is not being used in the
route table that is associated with the subnets where primary and secondary SAP HANA instances will
be deployed
(E). Before starting the Launch Wizard deployment set up the SUSE Linux Enterprise High Availability
Extension network configuration and security group
A global retail company is running its SAP landscape on AWS Recently the company made
changes to its SAP Web Dispatcher architecture The company added an additional SAP Web Dispatcher for high availability with an Application Load Balancer (ALB) to balance the load between
the two SAP Web Dispatchers When users try to access SAP through the ALB the system is reachable
However the SAP backend system is showing an error message An investigation reveals that the issue
is related to SAP session handling and distribution of requests . The company confirmed that the
system was working as expected with one SAP Web Dispatcher. The company replicated the
configuration of that SAP Web Dispatcher to the new SAP Web Dispatcher How can the company
resolve the error?
(A). Maintain persistence by using session cookies Enable session stickiness (session affinity) on the
SAP Web Dispatchers by setting the wdisp/HTTP/esid_support parameter to True
(B). Maintain persistence by using session cookies Enable session stickiness (session affinity) on the
ALB
(C). Turn on host-based routing on the ALB to route traffic between the SAP Web Dispatchers
(D). Turn on URL-based routing on the ALB to route traffic to the application based on URL
A company wants to migrate its SAP S/4HANA software from on premises to AWS in a few weeks An SAP solutions architect plans to use AWS Launch Wizard for SAP to automate me SAP deployment on AWS Which combination of steps must the SAP solutions architect take to use Launch Wizard to meet these requirements? (Select TWO.)
(A). Download the SAP software files from the SAP Support Portal Upload the SAP software files to
Amazon S3 Provide the S3 bucket path as an input to Launch Wizard
(B). Provide the SAP S-user ID and password as inputs to Launch Wizard to download the software
automatically.
C). Format the S3 Tile path syntax according to the Launch Wizard deployment recommendation
(D). Use an AWS CloudFormation template for the automated deployment of the SAP landscape
(E). Provision Amazon EC2 instances Tag the instances to install SAP S'4HANA on them
A company is hosting its SAP workloads on AWS An SAP solutions architect is designing high
availability architecture for the company's production SAP S4HANA and SAP BW-4HANA workloads
These workloads have the following requirements.
* Redundant SAP application servers that consist of a primary application server (PAS) and an
additional application server (AAS)
* ASCS and ERS instances that use a failover cluster
* Database high availability with a primary DB Instance and a secondary OB instance How should the
SAP solutions architect design the architecture to meet these requirements?
(A). Deploy ASCS and ERS cluster nodes in different subnets within the same Availability Zone Deploy
the PAS instance and AAS instance in different subnets within the same Availability Zone Deploy the primary DB instance and secondary DB instance m different subnets within the same Availability Zone
Deploy all the components in the same VPC
(B). Deploy ASCS and ERS duster nodes m different subnets within the same Availability Zone Deploy
the PAS instance and AAS instance in different subnets within the same Availably Zone Deploy the
primary DB instance and secondary DB instance m different subnets within the same Availability Zone
Deploy the ASCS instance PAS instance and primary DB instance in one VPC Deploy the ERS instance
AAS instance and secondary DB instance in a different VPC
(C). Deploy ASCS and ERS cluster nodes in different subnets across two Availability Zones Deploy the
PAS instance and AAS instance m different subnets across two Availability Zones Deploy the primary
DB instance and secondary DB instance in different subnets across two Availability Zones Deploy all
the components in the same VPC
(D). Deploy ASCS and ERS cluster nodes in different subnets across two Availability Zones Deploy the
PAS instance and AAS instance m different subnets across two Availability Zones Deploy the primary
DB instance and secondary DB instance in different subnets across two Availability Zones Deploy the
ASCS instance PAS instance and primary DB instance in one VPC Deploy the ERS instance AAS
instance and secondary DB instance in a different VPC
A company wants to migrate its SAP workloads to AWS from another cloud provider. The
company's landscape consists of SAP S 4HANA SAP BWMHANA SAP Solution Manager and SAP Web
Dispatcher SAP Solution Manager 15 running on SAP NANA The company wants 10 change the
operating system from SUSE Linux Enterprise Server to Red Hat Enterprise Linux as a pan of this
migration. The company needs a solution that results in the least possible downtime for the SAP
SMHANA and SAP BW 4HANA systems.
Which migration solution will meet these requirements?
(A). Use SAP Software Provisioning Manager to perform a system export/import for SAP S/4HANA
SAP BW.4HANA SAP Solution Manager and SAP Web Dispatcher
(B). Use backup and restore tor SAP S'4HANA. SAP BW4HANA and SAP Solution Manager Reinstall
SAP Web Dispatcher on AWS with the necessary configuration
(C). Use backup and restore for SAP S'4 HAN A and SAP BW 4HANA Use SAP Software Provisioning
Manager to perform a system export import for SAP Solution Manager Reinstall SAP Web Dispatcher
on AWS with the necessary configuration.
(D). Use SAP HANA system replication to replicate the data between the source system and the target
AWS system for SAP S 4HANA and SAP BW 4HANA Use SAP Software Provisioning Manager to
perform a system export import for SAP Solution Manager Reinstall SAP Web Dispatcher on AWS
with the necessary configuration
A company is using SAP NetWeaver with Java on AWS The company has updated its generation of Amazon EC2 instances to the most recent generation of EC2 instances When the company tries to start SAP the startup fails The log indicates that the SAP license expired Of is not valid.What is the reason for this issue?
(A). The instance ID changed as part of the EC2 generation change
(B). The instance's hypervisor changed from Xen to Nitro
(C). The SAP Java Virtual Machine (SAP JVM) is not compatible with the new instance type
(D). An EC2 generation change is not supported for SAP Java-based systems
An SAP technology consultant needs to scale up a primary application server (PAS) instance The PAS currently runs on a c5a.xlarge Amazon EC2 instance The SAP technology consultant needs to change the instance type to c5a 2xlarge How can the SAP technology consultant meet this requirement?
(A). Stop the complete SAP system Stop the EC2 instance Use the AWS Management Console or the AWS CLI to change the instance type Start the EC2 instance Start the complete SAP system
(B). While SAP is running use the AWS Management Console or the AWS CLI to change the instance type without stopping the EC2 instance
(C). Stop the complete SAP system, Terminate the anstance Use the AWS Management Console or .COM
the AWS CLI to change the instance type Start the EC2 instance Start the complete SAP system
(D). While SAP is running log in to the EC2 instance. Run the following AWS CLI command: aws ec2
modify-instance-attribute instance-id <INSTANCEID>
-Instance type "Value": "c5a.2xlarge1\""
A company's basis administrator is planning to deploy SAP on AWS m Linux. The basis administrator must set up the proper storage to store SAP HANA data and log volumes. Which storage options should the basis administrator choose to meet these requirements? (Select TWO.)
(A). Amazon Elastic Block Store (Amazon EBS) Throughput Optimized HDD (st1)
(B). Amazon Elastic Block Store (Amazon EBS) Provisioned IOPS SSD (io1, k>2)
(C). Amazon S3
(D). Amazon Elastic File System (Amazon EFS)
(E). Amazon Elastic Block Store (Amazon EBS) General Purpose SSD (gp2 gp3)
A company is planning to move to AWS. The company wants to set up sandbox and test
environments on AWS to perform proofs of concept (POCs) Development and production
environments will remain on premises until the POCs are completed.
At the company's on-premises location SAProuter is installed on the same server as SAP Solution
Manager. The company uses SAP Solution Manager to monitor the entire landscape The company uses SAP
router to connect to SAP Support The on-premises SAP Solution Manager instance must monitor the
performance and server metrics of the newly created POC systems on AWS. The existing SAP router
must be able to report any issues to SAP What should an SAP solutions architect do to set up this
hybrid infrastructure MOST cost-effectively'?
(A). Install a new SAP Solution Manager instance and a new SAP router instance m the AWS
environment Connect the POC systems to these new instances Use these new instances m parallel
with the on-premises SAP Solution Manager instance and the on-premises SAP router instance
(B). Install a new SAP Solution Manager instance and a new SAP router instance in the AWS
environment install the Amazon CloudWatch agent on all on-premises instances Push the monitoring
data to the new SAP Solution Manager instance Connect ail on-premises systems and POC systems on
AWS to the new SAP Solution Manager instance and the new SAP router instance Remove the onpremises
SAP Solution Manager instance and the on-premises SAP router instance Use the new
instances on AWS
(C). Use AWS Site-to-Site VPN to connect the on-premises network to the AWS environment Connect
the POC systems on AWS to the on-premises SAP Solution Manager instance and the on-premises
SAP router instance
(D). Add the POC systems on AWS to the existing SAP Transport Management System that is
configured m the on-premises SAP systems
A company is starting a new project to implement an SAP landscape with multiple accounts
that belong to multiple teams in the us-east-2 Region. These teams include procurement finance
sales and human resources An SAP solutions architect has started designing this new landscape and
the AWS account structures The company wants to use automation as much as possible The
company also wants to secure the environment implement federated access to accounts centralize
logging and establish cross-account security audits in addition the company's management team
needs to receive a top-level summary of policies that are applied to the AWS accounts.
What should the SAP solutions architect do to meet these requirements?
(A). Use AWS CloudFormation StackSets to apply SCPs to multiple accounts in multiple Regions. Use
an Amazon CloudWatch dashboard to check the applied policies in the accounts
(B). Use an AWS Elastic Beanstalk blue green deployment to create 1AM policies and apply them to
multiple accounts together Use an Amazon CloudWatch dashboard to check the applied policies in
the accounts
(C). Implement guardrails by using AWS CodeDeploy and AWS CodePipeline to deploy SCPs into each
account Use the CodePipeline deployment dashboard to check the applied policies in the accounts
(D). Apply SCPs through AWS Control Tower Use the AWS Control Tower integrated dashboard to
check the applied policies in the accounts
An SAP specialist is budding an SAP environment The SAP environment contains Amazon EC2
instances that fun in a private subnet in a VPC. The VPC includes a NAT gateway.
The SAP specialist is selling up IBM Db2 high availability disaster recovery for the SAP duster. After configuration of overlay IP address routing traffic is not routing to the database EC2 instances. What should the SAP specialist do to resolve this issue?
(A). Open a security group tor SAP ports to allow traffic on port 443
(B). Create route table entries to allow traffic from the database EC2 instances to the NAT gateway
(C). Turn off the source destination check for the database EC2 instances
(D). Create an IAM role that has permission to access network traffic Associate the role with the
database EC2 instances
A company is designing a disaster recovery (DR) strategy for an SAP HANA database that runs
on an Amazon EC2 instance in a single Availability Zone The company can tolerate a long RTO and an
RPO greater than zero if it means that the company can save money on its DR process.
The company has configured an Amazon CloudWatch alarm to automatically recover the EC2
instance if the instance experiences an unexpected issue. The company has set up AWS Backint Agent
for SAP HANA to save the backups into Amazon S3.
What is the MOST cost-effective DR option for the company's SAP HANA database?
(A). Set up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA
database in a second Availability Zone from backups that are stored in Amazon S3 When the SAP
HANA database is operational perform a database restore by using the standard SAP HANA restore
process.
(B). Launch a secondary EC2 instance for the SAP HANA database on a less powerful EC2 instance
type in a second Availability Zone Configure SAP HANA system replication with the preload option
turned off
(C). Launch a secondary EC2 instance tor the SAP HANA database on an equivalent EC2 instance type
in a second Availability Zone Configure SAP HANA system replication with the preload option turned
on
(D). Set up AWS CloudFormation to automatically launch a new EC2 instance for the SAP HANA
database in a second Availability Zone from backups that are stored in Amazon Elastic Block Store
(Amazon EBS) When the SAP HANA database is operational perform a database restore by using the
standard SAP HANA restore process
