Font size
WorksheetsC03 FINAL THEORY SET 1 L2
Total questions: 30
Worksheet time: 15mins
What is the meaning of Workshop Safety?
Be aware that all accidents are preventable. Visualize safer and better working methods.
Workshop safety involves the safe controlled process of assembling various components to form a complete part.
Workshop safety is the building and construction of metal structures by the process of cutting, bending, shaping, and assembling.
Workshop Safety (Safety workshop) is a very important requirement to prevent accidents and injuries from happening while working in the workshop.
Which of the following is NOT related to workplace safety?
Keep and use all tools correctly and safely.
Do not leave the workshop without permission.
Be alert all the time, carelessness causes accidents.
Always follow the correct procedure when performing a job.
What does S.O.P stand for?
Standard Operating Process
Standard Operate Procedure
Specify Operating Procedure
Standard Operating Procedure
Which is the correct step to make a Standard Operating Procedure (SOP) Report for machine usage?
State brand only.
Only state model
Specify the details of the accident
Specify the machine Name, Code, Model, Brand, Location and each step on how to operate it.
What is the name of the measuring equipment shown in Figure above?
Dial caliper
Micrometer
Digital caliper
Vernier caliper
In the Figure Hack Saw above, what is the name of the part labelled A?
Prongs
Fixed section
Hardened jaws
Movable section
In the Figure Hack Saw above, what is the name of the part labelled B?
Blade
Spindle
Anvil plate
Hardened jaws
In the Figure Hack Saw above, what is the name of the part labelled C?
Tension nut
Fixed section
Movable section
Sliding pin handle
In the Figure Hack Saw above, what is the name of the part labelled E?
Spindle
Section pin
Adjustable frame
Sliding pin handle
Which of the following is NOT a machining process?
Milling
Drilling
Welding
Grinding
Which is the instrument used for testing the flatness of a metal bar that has been filed?
Divider
L square
Steel rule
Set square
What is the purpose for doing “scribing” on a work piece?
Punch holes on the work piece.
Dig steel dust out after punched holes.
Marking the line before cutting or chisel.
Remove the rags or burrs on the work piece.
What is the first thing to do if the floor is flooded with coolant fluid?
Place warning signs.
Make a written report.
Report to the superiors.
Clean the floor until clean.
Which is the importance for aligning the vise?
To reduce heat when cutting process.
To ensure that workpiece does move work of machine.
To make the machining operations according to tolerance.
To ensure that work piece is parallel with the machine spindle.
Which is the machining operation that requires vise inspection?
Boring
Side mill
Squaring
Counter bore
Which tool is used for clamping?
Nut
Vice
Chisel
Hammer
Which is the most effective material used to absorb oil that has spilled onto the floor?
Sand
Rubber
Glass powder
Wood powder
Which of the below are two main categories of measuring instruments?
Analog and digital.
Outside and depth.
Outside and inside.
Direct reading and indirect reading.
Which is a type of accessory that can be used with the "impact drivers"?
Steel ruler
Drill Chuck
Screwdriver
Torque Wrench
Which type of file shape is used to enlarge the round holes?
Rotary file
Square file
Triangle file
Rectangle file
Which of the following is true about the connection process?
It is troublesome for transportation work.
Products produced should be closed and not opened again.
2 or more parts joined together to make one complete component.
Goods are more economically produced separately and then assembled.
What is another name for “open-die forging”?
Tom forging
Paul forging
John forging
Smith forging
Which of the equipment/tool below is best described by the statement above?
Vice
Screw
Tap Wrench
Drilling Machine
What is the function of Claw hammer?
It is used for welding.
It is to knock at narrow area.
It is used to hold in narrow area.
It is used by carpenters to drive nails into and to pull nails from the wood.
What is the difference between “emptying process” and “pressing process?
Pressing process is more difficult than emptying process
There are no differences as both will using the same mold.
There are no differences as both having the same shearing process.
The side cut will change places with scrap parts in the process of emptying.
Which of the material below is used to make the saw blade?
Steel
Carbide
Titanium
Cast Iron
Which is the best type of material for making drill bits?
Cast iron
Mild steel
Stainless steel
High speed steel
Which of the following is a defect in the rolling process?
Chipping
Soldering
Scattering
Alligatoring
Which kind of cost below should be included to calculate the actual cost of making a product?
The cost to store raw materials in the bank.
The cost to store the finished products in the bank
The cost to provide comfort for shoppers to choose products.
The cost incurred by the seller to store products in the warehouse before sales.
Which one below is NOT a safety measure while using a handsaw?
Tighten the vise using a “sledge hammer”.
Wear eye protection when using a hand saw.
Carry a hand saw by its handle with the saw end pointed down.
Do not test the saw teeth on hands or fingers to determine whether the hand saw is sharp.
