Worksheetskg exam
Total questions: 97
Worksheet time: 46mins
What is this?
Graphics Card
Mouse
Audio Card
CPU
What is this?
CPU
RAM
ROM
Speakers
What is this?
Audio Card
Graphics Card
CPU
Motherboard
What is this?
CPU
Motherboard
Graphics Card
Hard Disc Drive
What is this?
Mouse
Speakers
Keyboard
Monitor
What is this?
TV
Motherboard
Keboard
Monitor
What is this?
CPU
Motherboard
ROM
RAM
What is this?
Mouse
RAM
Speaker
Keyboard
What is this?
DVD
Optical drive
CD
Hard drive
What is this?
Scanner
Monitor
Printer
HDD
What is this?
ROM
RAM
Printer
CPU
What is this?
Monitor
Headphones
Printer
Speakers
What is this?
USB
USB Pendrive
CPU
RAM
What are all of these?
Documents
Software
Hardware
High speed CAN uses only CAN high signal wires.
True
False
Low speed CAN has a CAN high signal wire.
True
False
If a single module is not communicating on a CAN network, what is the best first step?
Verify power and ground for that module
Install the breakout box to Gateway and view the module's waveform with the DSO
Inspect for marten bites
Verify an LED test light flickers when back-probing another CAN module
In a CAN or LIN network that has no fault, the signal is the same throughout the network, no matter where it is viewed.
True
False
Where do modules get their power and ground for communication?
From Gateway (J533)
Power from the Gateway (J533), and ground through its housing
Ground through the Gateway (J533), and power from their individual wiring harnesses
Power and ground through their individual wiring harnesses
What is true about LIN (Local Interconnect Network)?
It allows a CAN (LIN master) module to control and receive information from modules that are not on a CAN network
It allows a LIN (slave) module to wake up a CAN module
It is one of the fastest networks that exist
It is not used anymore
CAN and LIN communication is best described as:
Electrical current used as a language between modules
Voltage as a language between modules
It is a form of PFM
Electrical resistance as a language
How do high speed CAN signals differ from low speed CAN signals?
Where am I?
High speed CAN's CAN low signal always gets pulled high
Low speed CAN's CAN high signal always gets pulled low
The dominant and recessive voltage amplitudes are different
Why are CAN high and low signal wires twisted together?
Martens are unable to bite a single wire
It's easier to identify the matched set during repairs
Any electrical interference will affect them equally keeping differential voltages valid
So each wire can detect the messages sent the opposite direction
If low speed CAN has an open circuit in one of its wires, what will happen?
The control modules will still function normally, but have faults for single wire mode
The control modules will only partially function, but have faults for single wire mode
No faults will set because it's a fault-tolerant system
No communication is possible because it's not a fault-tolerant system
When should bandwidth limitation (BWL) be off?
for low frequency signals
for high frequency signals
the start of diagnosis
my day off
When should a multimeter be used to evaluate the quality of network communication signals?
When it's a misdiagnosis or comeback
When power and ground have been verified at all modules
When you've given up
Never
What type of signal is displayed?
Analog
Digital
Digilog
Anital
What type of signal is displayed?
Analog
Digital
PFM
Wait, what?
Local Interconnect Network (LIN) uses a single wire for communication.
False
True
If a CAN module does not have power at it's individual wiring harness connector, what will the network signal look like at that same connector?
It will be 0V, no matter which network
It will be approximately recessive voltage for it's type of network
It will be a normal waveform for the type of network protocol used
It will default to source voltage
If there is an open circuit between a CAN master module and one of it's LIN components, what will the network signal look like at that LIN component?
It will be 0V
It will be continuous source voltage
It will be continuous recessive voltage
It will appear like a normal LIN network signal
What is the most likely cause of the displayed waveforms?
Bandwidth Limitation is turned on
Bandwidth Limitation is turned off
There is a short between the low-speed and high-speed CAN
There is a short between the high-speed and low-speed CAN
In a MOST network, what is meant by "attenuation"?
The attention level of each module
The reduction in light intensity
The interference of electromagnetism
The interference of short-wave radio signals
If you cannot communicate with a single module on a network, what is the best next step?
Connect the DSO at the component and evaluate the network signal
Connect the breakout box and evaluate the network with a DSO
Connect the breakout box and evaluate the network with a DVOM
Check power and ground at that module
Qual è il livello mancante in questa rappresentazione del modello ISO/OSI?
Internet
Network
Router
Datagram
Il processo di incapsulamento prevede...
La suddivisione dei dati in frames
Il controllo dell'integrità dei dati attraverso il checksum
L'aggiunta di informazioni tramite headers o trailers
Il trasferimento dei dati dopo averli tradotti in bits
Quale PDU (Protocol Data Unit) corrisponde al livello Network del modello ISO/OSI?
Packets
Frames
Data
Segments/Datagrams
FTP è un protocollo di livello...
Network
Transport
Application
Session
Nel modello ISO/OSI il secondo livello, DataLink, viene generalmente suddiviso in due ulteriori strati, quali?
PEC e LLM
MAC e LLC
MAC e BAC
BEC e LLC
Qual è una delle codifiche più utilizzate nel livello Physical per trasformare i dati in segnali?
Not Return to Zero
Not Return to Home
Not Ready or False
Not Return or Scroll
Quali delle seguenti affermazioni è VERA sul confronto tra modello ISO/OSI e TCP/IP
ISO/OSI è implementato nella realtà
ISO/OSI ha 7 livelli e TCP/IP 4
Il livello Presentation è presente in TCP/IP
Entrambi i modelli prevedono l'incapsulamento
Nel modello TCP/IP il protocollo UDP...
Si associa al livello Application
E' un protocollo orientato alla connessione
Ha come PDU il Datagram
Può essere usato senza specificare una porta
Nel modello Client/Server, il Client...
Espone uno o più servizi
Può connettersi ad un solo Server
Può connettersi ad uno o più Server
Rimane sempre in ascolto
Una connessione viene stabilita attraverso un socket, che viene identificato da:
Indirizzo IP e protocollo
Indirizzo IP e porta
Protocollo e porta
Nome del servizio e indirizzo IP
L'indirizzo IP 18.122.181.43 è un indirizzo di...
Classe A
Classe B
Classe C
Classe E
Il protocollo IP ha tra le sue funzioni quella di...
Controllo di flusso
Instradamento
Indirizzamento
Controllo di errore
Qual è il Type relativo a "Destination host unreachable" nel comando ping?
0
2
3
8
Uno di questi NON è un flag presente nell'header di un pacchetto TCP, quale?
SYN
ASH
RST
ACK
Qual è la sequenza corretta che identifica un avvenuto Three-Way Handshake?
ACK
SYN-ACK
ACK
ACK
SYN
SYN-ACK
SYN
SYN-ACK
ACK
SYN
SYN-ACK
SYN
Una di queste NON è una "well known ports" , quale?
21
8080
443
80
Alla porta 25 viene associato il protocollo...
(a)
Il protocollo UDP effettua...
Il riordino dei pacchetti
La ritrasmissione dei pacchetti
Il 3-Way Handshake
Nessuno dei precedenti
Attraverso il protocollo SSH è possibile...
Inviare e-mail
Accedere al Web
Aprire sessioni remote sicure
Tradurre domini in indirizzi IP
The term OS is short for?
Apple
Operating Software
Operating System
Overload System
Which of these is not a function of an OS:
Provide a user interface
Communicate with hardware
Allow the computer to multi-task
Improves CPU performance
What does GUI stand for?
Genuine Umpire Impressions
Graphical User Interface
Graphic Up Industry
Which is NOT a function of Operating Systems?
Booting the Computer
Networking
Streaming content
Device Management
A computer needs both hardware and software to work
true
false
How can the OS help manage security of the system?
The OS can hire backup
User accounts may be password protected
Files can self destruct after a set time
Which one is not an operating system?
iOX
Windows
Android
Poloroid
Which of the following are NOT Operating Systems (tick all that apply)
iOS
Linux
Samsung
iPhone
MacOSX
The picture shows a type of user interface as a function of operating system
Command Line
Graphical User Interface
Picture Point Mode
MacOSX
The term OS is short for?
Apple
Operating Software
Operating System
Overload System
What language do operating systems use?
The operators language e.g. English
Binary Code
Code
XOXO
Which of the following is a function of the operating system?
To compose and send email.
To edit photographs and other high-resolution images.
To control communication and manage files.
All of these are operating system functions.
Which of the following software manages the files and folders on your computer's hard disk drive?
Word processing software
Anti-virus software
Operating System
Database software
What does GUI stand for?
General Utilities Intervention
Graphical User Interface
General User Intervention
Graphical Utilities Interface
Which of these tasks is a function of the operating system?
Scanning a photograph
Copying a file
Producing a database report
Adding data to a spreadsheet
Which of the followings is not GUI operating system?
DOS
Windows
iOS
Linux
What do device drivers do?
Allows the OS to communicate with hardware
Drives around the motherboard
Increases the amount of storage
How does the OS handle file management?
Deals with movement, editing and deletion of data
Colour codes data
Translates data into binary
