The simplest stairway is the:

A complete stairway includes at least this number of saw toothed edge stringers

Some stairway treads and risers are supported on these shaped blocks nailed to the upper edges of the stringers:

The horizontal face of one step is called:

This is the main post of the railing at the start of the stairs

This is the intermediate are between two parts of a flight of stairs:

Radiating treads at the turn in a set of stairs are called:

Headroom is measured from the lowest point of the soffit or ceiling directly overhead to the:

Treads on a stairway should be:

Handrails are most graspable when they are made from metal tubing or solid wood stock with a _______ profile.

A handrail height should be between

A third stringer should be added to a stairway when the treads are less than 1-1/2" or the width of the stairs are more than ___ wide

Which if the following is not an acceptable method for installing the stringers?

When installing exterior stairs, the bottom landing should be made from?

When calculating stairs, the one dimension that cannot be changed is the

The most popular type of stairs that can access an attic is a ________ stairway

Increasing the riser height will

The preferred angle of stairs is

The term used to reduce the length of a stair stringer to compensate for the thickness of the stair tread and difference in floor material is referred to as ___________ the stringer