NEW
Font size
WorksheetsPROCEDURE TEXT
Total questions: 25
Worksheet time: 25mins
The language feature of procedure text is. . .
Present Tense
Past Tense
Imperative
Gerund
What is the Generic Structure of the text?
Goal – Materials – Steps
Goal – Equipment – Steps
Goal – Materials – Resolution
Goal – Ingredients – Resolution
HOW TO MAKE BERGEDEL TEMPE
What you need :
150 g tempe
2 table spoons of tried shallots
3 kefirs of lime leaves
1 table spoon of flour
1 egg
1 cup of vegetable oil for frying
Spice paste :
3 large chilies, seeds removed
3 small chilies
2 red shallots
2 cloves of garlic
½ tea spoon of coriander seeds
½ tea spoon of salt
¼ tea spoon of shrimp paste
What to do :
Mash the tempe with a fork, or place in the bowl of a food processor and blend until it resembles coarse bread crumbs.
Grind the spices in a mortar and pestle, or place in the bowl of a food processor and blend to a smooth paste.
Put the mashed tempe in a bowl and mix with the spice paste, fried shallots and lime leaves. Stir in the flour, followed by the egg.
Shape the tempe into fritters the size of a golf ball and flatten a little with a fork.
Heat the vegetable oil in a wok over a medium flame. When the oil is hot, drop the fitter into the oil, five or six at the time.
Fry until golden brown on both sides, drain on absorbent paper, and serve hot with rice.
Q: What is the social fuction of Procedure text?
To describe about how to make Bregedel Tempe
To inform the readers about Bregedel Tempe.
To retell about Bregedel Tempe.
To describe about Bregedel Tempe
How to Make Flannel Rose Ring
Ingredients:
Red Flannel around 10×10 cm
Scissors
Glue
The ways:
Cut round the flannel about 5×3 cm and make spiral in it.
Glue each side of spiral flannel.
Twist it from central until the end (look like a rose).
Cut the flannel in a rectangle (the size depend on your finger).
Put the rose in a rectangle and glue it.
Flannel rose ring is ready to wear.
Q: Which statement is NOT TRUE about the instruction?
All people have the same size of rectangle to make the ring.
We must glue the rose in rectangle to get the ring.
The biggest the finger means the more flannel that needed.
We make a rectangle after we make a rose form.
How to Make Flannel Rose Ring
Ingredients:
Red Flannel around 10×10 cm
Scissors
Glue
The ways:
Cut round the flannel about 5×3 cm and make spiral in it.
Glue each side of spiral flannel.
Twist it from central until the end (look like a rose).
Cut the flannel in a rectangle (the size depend on your finger).
Put the rose in a rectangle and glue it.
Flannel rose ring is ready to wear.
Q: We need flannel . . . to make rose ring for twice.
More than 10x10cm
Less than 10x10cm
Only 10x10cm
About 10x10cm
How to Make Flannel Rose Ring
Ingredients:
Red Flannel around 10×10 cm
Scissors
Glue
The ways:
Cut round the flannel about 5×3 cm and make spiral in it.
Glue each side of spiral flannel.
Twist it from central until the end (look like a rose).
Cut the flannel in a rectangle (the size depend on your finger).
Put the rose in a rectangle and glue it.
Flannel rose ring is ready to wear.
Q: What should we do after we cut round the flannel?
Cut it in spiral form
Glue each side of the flannel
Twist from the central until the end
Put the rose in a rectangle and glue it.
How to Make Flower Crown
Things you need:
Flowers
Scissor
Tape
Glue
Elastic wire
Ribbon / rope
Steps:
1. Choose and prepare 3 kinds of flowers.
2. Cut the flowers. Make sure the length of the stem is about 7 cm.
3. Cut the elastic wire and measure it to your head. Tie the end of the wire to make it sturdy.
4. Arrange the flowers to the ribbon and glue them. Make sure the flowers fill in the ribbon beautifully.
5. Attach the ribbon with flowers to the elastic wire by using the tape. Fill in the empty space with smaller size flowers.
6. Cut another ribbon about 50 cm and insert it into the wire with flowers.
7. Put the crown on your head. Tie the ribbon/rope. You'll look lovely wearing it.
Q: What should you do before you attach the ribbon with flower to the elastic wire?
Arrange and glue the flowers to ribbon
Cut another ribbon and insert it into the wire
Fill in empty space with smaller flowers
Choose and prepare the flowers
How to Make Flower Crown
Things you need:
Flowers
Scissor
Tape
Glue
Elastic wire
Ribbon / rope
Steps:
1. Choose and prepare 3 kinds of flowers.
2. Cut the flowers. Make sure the length of the stem is about 7 cm.
3. Cut the elastic wire and measure it to your head. Tie the end of the wire to make it sturdy.
4. Arrange the flowers to the ribbon and glue them. Make sure the flowers fill in the ribbon beautifully.
5. Attach the ribbon with flowers to the elastic wire by using the tape. Fill in the empty space with smaller size flowers.
6. Cut another ribbon about 50 cm and insert it into the wire with flowers.
7. Put the crown on your head. Tie the ribbon/rope. You'll look lovely wearing it.
Q: What is the antonym of the word "attach" in step 5?
Remove
Adjust
Apply
Tighten
Strawberry Juice
Ingredients:
5 large strawberries
2 tsp sugar
1/2 glass of water
milk or yogurt (optional)
ice cubes
Steps:
First, Slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
Q: What should we do if we want to make creamy strawberry juice?
Add milk
Add more ice cubes
Add yogurt
Add more strawberries
Strawberry Juice
Ingredients:
5 large strawberries
2 tsp sugar
1/2 glass of water
milk or yogurt (optional)
ice cubes
Steps:
First, Slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
Q: From the text, how many strawberries do we need?
4
5
6
7
Strawberry Juice
Ingredients:
5 large strawberries
2 tsp sugar
1/2 glass of water
milk or yogurt (optional)
ice cubes
Steps:
First, Slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
Q: "Blend them for about...." (step 4)
What is the synonym of the underlined word?
mix
separate
add
pour
Strawberry Juice
Ingredients:
5 large strawberries
2 tsp sugar
1/2 glass of water
milk or yogurt (optional)
ice cubes
Steps:
First, Slice the fruits.
Then, put them into blender.
Next, pour water, sugar and ice cubes.
If you like it creamy, you may add milk or add yogurt if you prefer sour taste.
After that, blend them for about 2 or 3 minutes.
And the last pour into the glass, add straw and the juice is ready to drink.
Q: Which statement is NOT TRUE according to the text?
We need 5 small strawberries
We add yogurt to make sour taste
Blend the juice for about 2-3 minutes
We need a blender to blend the juice
ORAGANIC FERMENTATION BACTERIA TO INCREASE CATTLE PRODUCTIVITY
EM- 4 is a mixture of micro-organisms that gives the benefit for cattle growth and product.
Usage:
1. Decrease smell pollution
2. Balance mutual micro-organisms
3. Increase quality and quantity of cattle product
How to use:
1. To get satisfying result, dissolve 1cc EM-4 per liter water every day
2. Spray 1 cc EM-4 per liter of water every week on the floor, wall, and manure.
Agent: PT. Songgolangit Persada, Jakarta
Distributor: Jl Ki Hajar Dewantara 46 Jakarta
Phone: (021) 7894529
Q: This text tells us about …
the use of EM-4
Fermentation
cattle product
contact address
ORAGANIC FERMENTATION BACTERIA TO INCREASE CATTLE PRODUCTIVITY
EM- 4 is a mixture of micro-organisms that gives the benefit for cattle growth and product.
Usage:
1. Decrease smell pollution
2. Balance mutual micro-organisms
3. Increase quality and quantity of cattle product
How to use:
1. To get satisfying result, dissolve 1cc EM-4 per liter water every day
2. Spray 1 cc EM-4 per liter of water every week on the floor, wall, and manure.
Agent: PT. Songgolangit Persada, Jakarta
Distributor: Jl Ki Hajar Dewantara 46 Jakarta
Phone: (021) 7894529
Q: One of the benefits of the product is …….
for increasing quality and quantity of cattle product
for increasing smell pollution
for producing cattle manure and organic fermentation bacteria
for increasing micro organisms
ORAGANIC FERMENTATION BACTERIA TO INCREASE CATTLE PRODUCTIVITY
EM- 4 is a mixture of micro-organisms that gives the benefit for cattle growth and product.
Usage:
1. Decrease smell pollution
2. Balance mutual micro-organisms
3. Increase quality and quantity of cattle product
How to use:
1. To get satisfying result, dissolve 1cc EM-4 per liter water every day
2. Spray 1 cc EM-4 per liter of water every week on the floor, wall, and manure.
Agent: PT. Songgolangit Persada, Jakarta
Distributor: Jl Ki Hajar Dewantara 46 Jakarta
Phone: (021) 7894529
Q: What will you do to get satisfying result?
Dissolve 1 cc EM-4 per liter of water every day.
Dissolve 1 cc EM-4 per liter of water every two days.
Dissolve 4 cc EM-1 per liter of water every week.
Dissolve 1 cc EM4 per liter of water every week.
Printing a File
1. Turn the printer on.
2. Open the file that you want to print.
3. Click “File”, and than click “Print”
4. Check if the printer’s name is the same as the one you are going to use. If i tis not the same, than search for the name of the printer that you are going to use by clicking on the small triangle or arrow beside it.
5. Click “Pages” and than type the pages that you want to print.
6. Select the number of copies that you want to print by clicking on the arrows beside it
Click “OK” or “Print”
Q: The text is about how to ......
Print a file
Save a file
Open a file
Delete a file
Printing a File
1. Turn the printer on.
2. Open the file that you want to print.
3. Click “File”, and than click “Print”
4. Check if the printer’s name is the same as the one you are going to use. If i tis not the same, than search for the name of the printer that you are going to use by clicking on the small triangle or arrow beside it.
5. Click “Pages” and than type the pages that you want to print.
6. Select the number of copies that you want to print by clicking on the arrows beside it
Click “OK” or “Print”
Q: What do we have to doi f the printer’s name is not the same as the one we are going to use?
Search for the name of the printer that we are going to use by clicking on the small triangle or arrow beside it
Select the number of copies that you want to print by clicking on the arrows beside it
Click “Pages” and then type the pages that you want to print
Turn the printer off
Tie Dyeing Old T-Shirt
Things you need:
Old cotton T-shirt
Large thread or rubber band
Cloth dye
Bucket
Steps:
1. Wash the cotton T-shirt
2. Place the wet shirt flat on the work surface
3. Tie knots in the T-shirt, or twist it and secure the folds with rubber bands or heavy-duty-thread
4. Mix ½ c. Liquid dye (or 1 package powdered dye) in 1 qt. Hot water. Dissolve 5 tbs table salt in the mixture
5. Let the mixture cool to room temperature
6. Put the entire shirt in the dye and let it soak for at least 20 minutes
7. Rinse the shirt in cold water until the water runs clear
8. Undo the knots and rinse the shirt again
Hang the shirt to dry, under the sun.
Q: How must we place the wet T-shirt?
Flat
Inside out
Upside down
Upside down
Tie Dyeing Old T-Shirt
Things you need:
Old cotton T-shirt
Large thread or rubber band
Cloth dye
Bucket
Steps:
1. Wash the cotton T-shirt
2. Place the wet shirt flat on the work surface
3. Tie knots in the T-shirt, or twist it and secure the folds with rubber bands or heavy-duty-thread
4. Mix ½ c. Liquid dye (or 1 package powdered dye) in 1 qt. Hot water. Dissolve 5 tbs table salt in the mixture
5. Let the mixture cool to room temperature
6. Put the entire shirt in the dye and let it soak for at least 20 minutes
7. Rinse the shirt in cold water until the water runs clear
8. Undo the knots and rinse the shirt again
Hang the shirt to dry, under the sun.
Q: Dissolve 5 tbsp table salt in the mixture.
The underline word means to make the table salt become ......
Part of the mixture
More solid
Colourful
Frozen
Tie Dyeing Old T-Shirt
Things you need:
Old cotton T-shirt
Large thread or rubber band
Cloth dye
Bucket
Steps:
1. Wash the cotton T-shirt
2. Place the wet shirt flat on the work surface
3. Tie knots in the T-shirt, or twist it and secure the folds with rubber bands or heavy-duty-thread
4. Mix ½ c. Liquid dye (or 1 package powdered dye) in 1 qt. Hot water. Dissolve 5 tbs table salt in the mixture
5. Let the mixture cool to room temperature
6. Put the entire shirt in the dye and let it soak for at least 20 minutes
7. Rinse the shirt in cold water until the water runs clear
8. Undo the knots and rinse the shirt again
Hang the shirt to dry, under the sun.
Q: Dissolve 5 tbs table salt in the mixture. The underlined word is the abbreviation of .......
Tablespoon
Teaspoon
Spoon
Cup
RECYCLING PAPER
Equipment:
Old paper, megazines, or newspaper
Belnder/food processor
Bucket
Insect screens/strainer
Wire
Bleach
White glue
Iron
Water
Direction:
First, shape wires into a rectangular shape.
Then, cover the wire frame with insect screen and sew it.
After that, rip the paper in a bucket and fill it with warm water.
And then, put the torn paper in a bucket and fill it with warm water.
Add one tbsp of bleach.
Soal the paper for an hour.
Next, put a cup of soaked paper in a blender, add some bleached water and blend it.
And then, pour the blended paper in a large rectangular container, e.g. sink or tray.
After that, repead step 5 and 6 until all of the soaked paper are blended.
Then, add and mix two tbps of white glue to the blanded paper.
After that, dip the screen frame into the blended paper. Lift and rinse the water for a minute.
Then, dry the paper in the sun. And then, peel the papers out of the frame screens when it’s dry.
Finally, iron the paper
Q: What do you learn from the text?
How to recycle paper
How to shapes wires
How to rip paper into small pieces
How to bleach paper
RECYCLING PAPER
Equipment:
Old paper, megazines, or newspaper
Belnder/food processor
Bucket
Insect screens/strainer
Wire
Bleach
White glue
Iron
Water
Direction:
First, shape wires into a rectangular shape.
Then, cover the wire frame with insect screen and sew it.
After that, rip the paper in a bucket and fill it with warm water.
And then, put the torn paper in a bucket and fill it with warm water.
Add one tbsp of bleach.
Soal the paper for an hour.
Next, put a cup of soaked paper in a blender, add some bleached water and blend it.
And then, pour the blended paper in a large rectangular container, e.g. sink or tray.
After that, repead step 5 and 6 until all of the soaked paper are blended.
Then, add and mix two tbps of white glue to the blanded paper.
After that, dip the screen frame into the blended paper. Lift and rinse the water for a minute.
Then, dry the paper in the sun. And then, peel the papers out of the frame screens when it’s dry.
Finally, iron the paper
Q: Soak the paper for a half an hour.
What does the underlined word meaning?
To make something completely wet
To make something completely dry
To put something completely quickly into liquid and take it out again
To tear something often suddenly or violently
Snow Globes
Glue a small object to the inside of the lid – a plastic figurine, f, ect.
Add glitter, beads, or foil confetti, ect.
Fill the jar with equal parts water and corn syrup, add food colouring if desired.
Seal the lid onto the jaru sing a watertight sealant.
Put a bead of sealant on the threads of the jar and on the inside threads of the lid.
Close itu up, leave overnight to dry.
Q: Which of the following is not needed to make Snow Globes?
Mixer
Thread
Glue
Glitter
Snow Globes
Glue a small object to the inside of the lid – a plastic figurine, f, ect.
Add glitter, beads, or foil confetti, ect.
Fill the jar with equal parts water and corn syrup, add food colouring if desired.
Seal the lid onto the jaru sing a watertight sealant.
Put a bead of sealant on the threads of the jar and on the inside threads of the lid.
Close itu up, leave overnight to dry.
Q: Why do you have to leave it over night?
To cool off
To heat
To blend
To dry
Pineapple Stew
Ingredients:
1 pineapple cut into dices
3 glasses of water
1 glass of granulated sugar
Direction:
1. Boil water until boiled.
2. Then add sugar, cinnamon, and cloves
3. Bring it to boil and add the pineapples.
4. Wait until you can smell the pineapple.
Remove from heat and serve cold
Q: When do we have to stop boiling the pineapple?
After sugar, cinnamon and cloves are added
When the water is boiled
When we smell the pineapple
After we remove the stew from heat
