State the reference in AS/NZS 3.3.2.2 that defines flexible cords.

What colours are used in NZ for Phase, Neutral & Earth conductors in single phase flexible leads?

Which of the following is not mentioned by AS/NZS 3000 3.3.2.2 for dealing with cables near external heat sources?

Which enviromental condition explains a Cable situation that needs to be suitable to cope with moisture to prevent shock, fire or malfunction.

Which enviromental condition explains a Cable situation where cable has been damaged by hitting, squashing, cutting, bending, or stretching?

Which enviromental condition explains a Cable situation where selection is made in accordance with AS/NZS 3000 7.7, so that those cables can survive for longer in a fire?

Which enviromental condition explains a Cable situation where cables can cope with a littlebit of this - if it is excessive then flexible cable is used

Which enviromental condition explains a Cable situation that requires cables to be able to deal with (AS/NZS 3000 3.3.2.7)?

Which enviromental condition explains a Cable situation where Insulation on plastic and rubber insulated cables can melt and fail if they get too hot.

Which enviromental condition explains a Cable situation that dissolves insulation and affects insulation resistance and cable structure?

Which enviromental condition explains a Cable situation where operation can occurs in driving rain and direct sunshine, or sea salt, or saw dust, grain or powder.

Which conductor has greater conductivity?

Which conductor is lighter and cheaper?

Which conductor is heavier and more expensive?

Which conductor has lower conductivity?

Which conductor is suited to general enviromental applications?

Which conductor is suited to aerial cables/power distribution applications?

Which conductor is best suited to domestic/commercial subcircuits or short mains runs?

Which conductor is best suited to long mains/submains runs?

Which conductor is cheaper than stranded conductors?

Which conductor is more flexible than solid conductors?

Which conductor core type allows for the production of bigger conductors?

Which conductor core type offers the best flexibility?

Which conductor core type is not very flexible and breaks easily?

Which conductor core type costs more than solid conductors?

Which conductor core type costs more than stranded conductors?

Which conductor core type is suitable for smaller fixed wiring applications like lighting?

Which conductor core type is suitable for general fixed wiring applications like power outlet circuits?

Which conductor core type is suitable for general wiring applications prone to movement like cords to appliances/extension leads?

What is a way that you could determine the size of a cable?

Which sheathing type is the smallest but provides the least insulation and mechanical protection?

Which sheathing type is larger but provides more insulation and mechanical protection?

Which sheathing type is suitable for general fixed wiring but needs additional mechanical protection?

Which sheathing type is suitable for general fixed wiring?

Which sheathing type is stronger and mechanically protected than non-braided, but with a higher cost and larger size/weight?

Which sheathing type is the strongest and most resilient, but with a high cost than the others?

Which sheathing type is suitable for movement and flexibilty and rough mechanical treatment, like in an industrial factory ?

Which sheathing type is suitable for rough mechanical treatment, where cable could be chased into rock or run in concrete ?

What of thefollowing is the best requirement of cable insulation?

What of the following is the best requirement of cable insulation?

According to Table 3.8 of AS/NZS 3000, what conductor colours can be used for Protective Earth or Equipotential Bonding?

According to Table 3.8 of AS/NZS 3000, what conductor colours can be used for Neutral?

According to Table 3.8 of AS/NZS 3000, what conductor colours can be used for Active/Phase?

In a single-phase flexible cable, which are the currently accepted colours?

In a multi-phase flexible cable, which are the commonly used colours?

Which Insulation is commonly used for general fixed wiring or flexible cords, but can become brittle in extreme temperatures?

Which Insulation is commonly used for installation in bitumen/polystryrene, as it will not leach its ploymers and become brittle?

Which Insulation is commonly used for general wiring in areas where safer visibility is required during a fire?

Which Insulation is commonly used for general use flexible cords and is a natural product?

Which Insulation is commonly used for Flexible Cables that expect rough treatment, yet still very flexible?

Which Insulation is commonly used for Flexible Cables with medium strength and resistant to high temperatures, like soldering irons and welding machines?

Which Insulation is commonly used for Flexible Cables in very hot or cold enviroments, like heating and cooking appliances?

Which Insulation is commonly used for hen short term cable survival is required like in lifts, fire systems and emergency lighting?

Which Insulation is commonly used for when longer-term fire survival is required but requires specialised installation techniques?

Which Insulation is commonly used for sheathing power distribution cables?

Which Insulation is commonly used for sheathing power distribution cable cores?

Which type of cable is stacks well, is economical to make, but can get twisted and is harder to bend smoothly?

Which type of cable offers superior safety and mechanical protection when used as underground mains?

Which type of cable is used for cheaper, general use flexible cords?

Which type of cable is used for installation on cable trays and is flexible, and a good choice for 3 phase Motor supply cable?

Which type of cable is used for flexible installation where extra toughness is required?

Which best describes cable current rating capacity?

Which standard is used to work out the current carrying capacity of cables in New Zealand?

Which table within AS/NZS 3000 gives the temperature limits for various cable core insulation types?