WorksheetsRVTI Review PDI Appliances
Total questions: 12
Worksheet time: 14mins
When completing the PDI on air conditioning systems, after safe work practices, what is the correct order of the steps?
document ducted air conditioning manufacturer, model number, and serial number and all actions taken on PDI form
plug RV into external 120V AC source
Locate the thermostat for the A/C unit and set to lowest setting
Check for air flow - cooler then ambient temperature through all A/C outlet
Complete documentation on the test, including all recommended repairs and appropriate record-keeping and warranty forms
When completing PDI on the refrigerator, what are the first steps (after safe work practices and documentation)?
plug RV into external 120V AC source
verify propane in container
energize refrigerator from AC power source (set to lowest setting); verify refrigerator cools on AC power source
switch source mode to propane (set to lowest setting); verify refrigerator maintains cool on propane power source
switch source mode to low voltage (set to lowest setting); verify refrigerator remains cool on low voltage power sources
When conducting the refrigerator PDI, which step MAY be optional?
AC mode
low voltage mode
propane mode
shore power
What is the correct order of tasks when completing the furnace PDI?
safe work practices and documentation of appliance
verify propane in container
locate thermostat for furnace and set to highest setting
check for air flow (warmer, then ambient temperature) through all furnace outlets
document actions taken, record-keeping, and warranty forms
After completing safe work practices and documentation, what is the correct order of tasks for completing the water heater PDI on a standard RV?
plug RV into external 120V AC source and verify propane in container
fill water heater
ignite water heater on gas
switch to AC mode, then inspect coolant hose connections
complete documentation
What is the correct order of steps for filling the water heater?
Open pressure and temperature relief valve on water heater; turn on water source; close faucet inside RV; verify water heater is filled
Turn on water source; close faucet inside RV; open hot water faucet; verify water heater is filled
Open hot water faucet; close relief valve; turn on water source; verify water heater is filled
verify water heater is filled; turn on water source; open hot water faucet; open pressure and temperature relief valve on water heater; when water starts to come out of P&T valve, close relief valve; close faucet inside RV
Choose the correct order of steps for completing PDI on a tankless water heater.
ignite source; document make/model/serial number; document actions, etc.; verify propane in container
document make/model/serial number; document actions, etc.; ignite source; verify propane in container
verify propane in container; ignite source; document make/model/serial number; document actions, etc.
document make/model/serial number; verify propane in container; ignite source; document actions, etc.
Place the steps for performing PDI on an oven in the correct order. (Safe work practices and make/model/serial number already completed.)
light oven pilot, verify ignition
set oven thermostat to 300 degrees
visually inspect flame
turn thermostat off
complete documentation
What color should the flame appear when completing an oven PDI?
mostly orange with red tips
mostly purple with yellow tips
mostly yellow with red tips
mostly blue with orange tips
Place the steps for performing PDI on a standard cook top range in the correct order. (Safe work practices and make/model/serial already completed.)
light each burner individually
visually inspect flame for completeness and total circumference of burner head
turn all burners off
document actions taken, warranty, etc.
What is the proper order of steps for conducting a microwave/convection PDI? (Safe work practices and documentation completed.)
plug RV into external 120V AC source
put a cup of tap water inside microwave
set timer to 1 minute and run microwave
verify tap water is hot or warmer
document actions, warranty, etc.
When completing PDI on the microwave/convection, place (a) of (b) inside microwave. Set timer to (c) then verify fluid is hot or warmer.
