NEW
Font size
S
M
L
XL
WorksheetsSejursarbakal Unit 1.3 V1S0
Total questions: 25
Worksheet time: 40secs
Name
Class
Date
1.
1. How are hands and feet protected when lifting heavy materials?
a)
Wear work packs.
b)
b. Wear loose clothing.
c)
Wear sound attenuators.
d)
d. Wear gloves and safety shoes.
2.
2. What should you do if you try to lift a load, but it is too heavy?
a)
Get help to handle heavy loads.
b)
b. Rest for a while and try again.
c)
c. Find someone stronger to liftit.
d)
d. Try as hard as you can to lift it.
3.
3.Why is it dangerous to load material too high on a cart?
a)
a. It can fall or obstruct your view.
b)
b. It will be too heavy for the cart.
c)
c. It is difficult to unload it later.
d)
d. The material on the bottom will be damaged.
4.
4. What does the cylinder cap on a gas cylinder do?
a)
a. Protects the cylinder valve.
b)
b. Keeps the gas in the cylinder.
c)
c. Tells you what is in the cylinder.
d)
d. Makes it easy to use the cylinder.
5.
5. Flammable gases are stored in……………………cylinders.
a)
a. red
b)
b. black
c)
c. green
d)
d. yellow
6.
6. Only work with explosive materials in……………………..areas.
a)
a. dark
b)
b. closed
c)
c. ventilated
d)
d. unventilated
7.
7. Why should you not wear metal buttons or jewelry when working around flammable materials?
a)
a. They may burn.
b)
b. They may get lost.
c)
c. They may cause sparks.
d)
d. They may get caught in machinery.
8.
8. Which of the following should be grounded?
a)
a. Circuits.
b)
b. Electrical leads.
c)
c. Frames of electrical machinery.
d)
d. Parts inside electrical machinery.
9.
9. What should you know about every electrical device?
a)
a. Don't touch it.
b)
b. It is safe to use.
c)
c. It can be dangerous.
d)
d. It's fun to play with.
10.
10. An internal defect in an electrical cord may be detected by the
a)
a. feel of the cord
b)
b. sight of the cord
c)
c. length of the cord
d)
d. smel1 of burned insulation
11.
11. It is dangerous to operate an electric power tool when the floor is wet because you may
a)
a. catch cold
b)
b. slip and fall
c)
c. ruin your shoes
d)
d. get an electric shock
12.
12. All electrical wires are considered dangerous and should be
a)
a. used
b)
b. tested
c)
c. repaired
d)
d. thrown away
13.
13. What do you put on the power cord before you begin repairs?
a)
a. Repair tag.
b)
b. Status tag.
c)
c. Warning tag.
d)
d. Maintenance tag.
14.
14. What plug is grounded?
a)
a. One prong plug.
b)
b. Two prong plug.
c)
c. Four prong plug.
d)
d. Three prong plug.
15.
15. Which extinguishing agent can be used on a class A fire only?
a)
a. CO2·
b)
b. Foam.
c)
c. Water.
d)
d. Dry chemical.
16.
16. What extinguishing agent would be best for putting out a class D metal fire?
a)
a. CO2·
b)
b. Foam.
c)
c. Water.
d)
d. Dry chemical.
17.
17. What extinguishing agent should be used on an electrical fire?
a)
a. CO2·
b)
b. Foam.
c)
c. Water.
d)
d. Dry chemical.
18.
18. In an emergency, what extinguishing agent can be used for all classes of fire?
a)
a. C02
b)
b. Foam
c)
c. Water.
d)
d. Dry chemical.
19.
19. With the all purpose nozzie, water may be applied. in a continuous stream or in a water
a)
a. fog
b)
b. hose
c)
c. dund
d)
d. bucket
20.
20. The hose of the fire extinguisher should be pointed at.....................................of the fire.
a)
a. top
b)
b. base
c)
c. side
d)
d. edge.
21.
21. Safety rules help us to
a)
a. understand the rules
b)
b. do the job correctly
c)
c. avoid danger and injury
d)
d. help a wounded airman
22.
22. Before you start to do the job, what should you think first?
a)
a. Safety.
b)
b. Take propėr tools.
c)
c. Report to supervisor.
d)
d Read the technical order.
23.
23. Pushing a load is safer than pulling because the load
a)
a. is lighter
b)
b. could hit you
c)
c. could be higher
d)
d. could easily change directions
24.
24. Which of the following is a rule concerning fire safety?
a)
a. Apply water to all electrical fipes.
b)
b. Fire extinguishers should be used for breaking windows.
c)
c. Fire extinguishers should be used only for fighting fires.
d)
d. Stóre cloths used with flammable materials in a paper container at all times.
25.
25. For electrical fires you must
a)
a. cut out the cable
b)
b. call the electric repair man
c)
c. shut off the power immediately
d)
d. use water to extinguish the fira
Reset
