NEW
Font size
Worksheets6.1 v1s0 fix
Total questions: 20
Worksheet time: 10mins
What is threaded at both ends and does not have a head?
An external wrenching bolt.
An internal wrenching bolt.
A stud.
A nut.
How many standards for threads are used?
1
2
3
4
What type of bolt is used more than any other type?
Internal wrenching bolt.
External wrenching bolt.
Hexhead bolt.
Clevis bolt.
What technical order contains information about hardware?
TO 32-1-101
TO 1-1A-8
TO 1-1-8
TO 0-1-2
What is the diameter of a bolt with the identification AN7?
7 inches.
7/16 inch.
7 centimeters.
7 millimeters.
What is device that is screwed on to the threaded end of a bolt, stud, or screw?
Thread
Rivet
Wire
Nut
Which style of nut can be screwed on or off by using fingers instead of a tool?
Wing nut
Check nut
Receptacle
Clamp
What washer is used to hold nuts tightly in place?
A ball and socket rivet
A countersunk rivet
An aluminum rivet
A Lock washer
Why should the technical order for hardware on a piece of equipment always be followed?
It doesn't have to be followed if another piece fits
If no technical order is available, it's all right
Substitution can cost equipment and lives
Substitution might cost more money
What measurement is used to measure the pitch of a screw?
Diameter
Radius
Length
TPI
What screws have coarse threads and are used.without nuts for light items?
Sheet metal screws.
Structural screws.
Round head screws
Machine screws
What kind of screw is almost as strong as a bolt?
Filister head screw
Countersunk screw
Structural screw
Machine screw
What rivet can be installed without using a bucking bar?
A solid shank rivet
A countersunk rivet
An aluminum rivet
A blind rivet
Where are the identification number of rivet are found in?
TO 0-1-1
TO 1-1A-2
TO 1-1A-8
TO 1-1A-1
What consists of a stud, grommet, and spring assembly?
Dz us turnlock fastener
Camloc fastener
Receptacle
Clamp
What is used to hold tubing, wiring, or cables in place?
A supersonic Dz us fastener
A camloc fastener
A Dz us fastener
A clamp
How would a cable be identified if it consisted of 7 strands, with 19 wires in each strand?
7x7
7x19
19x7
1/16-3/32
What is used to make minor adjustments in cable length or tension?
A bushing
A terminal
A fairlead
A turnbuckle
What is used to keep bolts from coming loose?
Plain washers
Safety wire
Threads
Studs
What is the minimum diameter permitted for a cotter pin?
25% of the diameter of the hole
50% of the diameter of the hole
75% of the diameter of the hole
100% of the diameter of the hole
