NEW
Font size
WorksheetsTipo de proyectos
Total questions: 10
Worksheet time: 11mins
Selecciona el tipo de proyecto que corresponde a la siguiente situación:
A customer reported high failure rate in board level testing in their production line. Laboratory work in KEMET detected failures on screened parts during ramp, but failed parts are capable of passing catalog IR limits.
Implement a new power source technology not use previously, to our existing DWV rotaries that is capable of segregating defective parts in the DWV ramp and dwell phase and controlling DWV cycles.
Accion Correctiva
Accion de Mejora Continua
Accion Preventiva
Según los datos mencionados en la situación anterior.
¿A qué nivel de riesgo correspondería según lo revisado durante el curso?:
Nivel de Riesgo 1
Nivel de Riesgo 2
Nivel de Riesgo 3
Emergency Change
Selecciona el tipo de proyecto que corresponde a la siguiente situación:
After the first Ei Dorado Line was installed (Autoline 80), oportunities detected on the installation were optimized on the next 2 lines (Autoline 100 & 90). One of the Main changes involved the anode baskets design and distance adjustment, in order to reduce the voltage resistivity as mentioned in previous QOD.
The objective of this project is to standarize the anode baskets in Autoline 80. In order to improve resistance/resistivity and optimize anode efficiency.
Accion Preventiva
Accion de Mejora continua
Accion Correctiva
Según los datos mencionados en la situación anterior.
¿A qué nivel de riesgo correspondería según lo revisado durante el curso?:
Nivel de Riesgo 1
Nivel de Riesgo 2
Nivel de Riesgo 3
Emergency Change
Selecciona el tipo de proyecto que corresponde a la siguiente situación:
The Teared Cover Tape Issue defect occurs when it is sealed on the edges of the cover or carrier. This is due to fraying due to improper adjustment (lack of centering of the cover on the carrier).
Standardize the use of the 0603 sealing head for TW 0805 Paper machines. To avoid the Teared Cover Tape Issue defect. Reduction of distance between flanges of sealing head 0805 TW to avoid sealing at the ends of the cover. This action was implemented as a result of look across after a customer complaint.
Accion Preventiva
Accion de Mejora Continua
Accion Correctiva
Según los datos mencionados en la situación anterior.
¿A qué nivel de riesgo correspondería según lo revisado durante el curso?:
Nivel de Riesgo 3
Nivel de Riesgo 1
Nivel de Riesgo 2
Selecciona el tipo de proyecto que corresponde a la siguiente situación:
Evaluate Alumina powder from the supplier's new location.
AluChem Supplier reported this year that it is completing a CAPEX project, so, they will be able to produce AC66-Alumina Powder at Little Rock Plant.
The freight cost (Kemet expenses) in 2022 was 200k usd, this change of location represents a logistic saving of about 36% ($72,000 usd per year) for Kemet. Also, the material will have cost reduction of 3% ($ 30,000 usd per year ).
Emergency Change
Accion Preventiva
Accion Correctiva
Accion de Mejora Continua
Según los datos mencionados en la situación anterior.
¿A qué nivel de riesgo correspondería según lo revisado durante el curso?:
Nivel de Riesgo 1
Nivel de Riesgo 3
Nivel de Riesgo 2
Selecciona el tipo de proyecto que corresponde a la siguiente situación:
Discolorated MR batches in the active area at firing.
On July 17, 2022, the Mixing Operator performed an incorrect manual weighing of minor powders by confusing the powder containers (same shape and color) and adding them to the mixture without visually validating the product. This caused many rejected batches due to discoloration in the active area of the chip.
To improve the manual weighing process of the minor powders by introducing a mistake proof system with automated materials releasing.
Accion Correctiva
Accion de Mejora Continua
Accion Preventiva
Según los datos mencionados en la situación anterior.
¿A qué nivel de riesgo correspondería según lo revisado durante el curso?:
Nivel de Riesgo 1
Nivel de Riesgo 3
Nivel de Riesgo 2
