NEW
Font size
WorksheetsGeneral Safety - AG Mech 1
Total questions: 55
Worksheet time: 28mins
You should report ALL injuries to:
An Advanced Student
Your Principal
Your Instructor
The office
You should wear suitable eye protection:
Tp improve your vision
When engaged in any activity where eye hazards may exist
To avoid myopia
When you desire to improve your appearance
It is best to fasten or remove loose clothing:
Before operating any machine
During the operation of the machine
After operating the machine
Ony when you are assisting the instructor
Safety glasses must be worn at all times in the shop.
True
False
It is best that any liquid spilled on the floor should be cleaned up immediately because it:
Could stain the floor
Looks unsightly
Causes more work for the janitor
May cause someone to slip and fall
Rags containing oil, gasoline, solvent, alcohol, paint varnish, or lacquer must be:
Kept in a designated covered metal container
Stored in a waste basket
Folded neatly and placed on the shelf
Stored in a warm dry place
Before using any power equipment, you should obtain permission from:
An advanced student
Your Principal
Your Instructor
The office
If you notice any damage to a tool, instrument or machine, you should:
Ask a student to repair it
Be careful when you use it
Say nothing because you might get blamed
Notify your instructor
All work that you plan to do should be approved by the instructor.
True
False
You should clear away chips and metal shavings with your hands from a piece of equipment.
True
False
When using a wood chisel or gouge, you should point the sharp edge of the tool away from your classmates, instructors, and yourself.
True
False
Before oiling, cleaning, or adjusting a machine, you should allow the machine to come to a complete stop and unplug the machine from the outlet to prevent it from being turned on.
True
False
You should make sure that all students and debris are clear of the machine before turning on the power.
True
False
All tools must be:
Used when the operator is ready
Used only after being properly fitted
Never used unless given approval by the instructor
All of the answers
Any broken equipment or machinery must be:
Shut off and removed from the work area
brought to the instructor's attention immediately
Fixed properly before using
All of the answers
All machinery must have all:
Switches properly functioning
Parts tightly fastened
Safety guards in place
All of the answers
When working one should:
Clean only at the end of the period
Keep work area clear of clutter, grease, and oil
Not worry about cleaning since it takes more time
Students should only use equipment when:
A students wants to
When a student knows how to operate the tool
Only when given instructor approval
Both B and C
Tools and objects should not be left in places where they can:
Be tripped on
Potentially cause a fire
Fall and cause injury
All of the answers
One should wear safety glasses in the shop:
Only when you want to
Only if it may be unsafe
If you are not comfortable
Always
One should wear protective clothing such as face shields, earplugs, coveralls, and gloves in addition to safety glasses:
Never
Always
When Needed / Appropriate
Open toed shoes are ______________ allowed in the shop:
Never
Always
When Needed / Appropriate
One should wear a mask or respirator when:
Never
Always
When harmful fumes and dust are present
The fire triangle consists of:
Earth, Wind, and Fire
Oxygen, Heat, and Fuel
Oxygen, gas, and wind
All of the answers
All flammable materials should be stored:
In approved containers
Away from other flammable materials such as wood or paper
In cool, dry area
All of the answers
Extinguishing a wood fire can be done by:
Water
Class A fire extinguisher
Class ABC fire extinguisher
All of the Answers
Extinguishing a gas, oil, or grease fire can be done with:
Water
Class A fire extinguisher
Class ABC fire extinguisher
All of the Answers
An electrical fire can be put out by:
Water
Class A fire extinguisher
Class ABC fire extinguisher
All of the Answers
To use a fire extinguisher:
Just press down on the handle
Pull the pin, Aim at the base of the flames, Squeeze the handle, and Sweep from side to side
pull the pin and let go of the handle
When extinguishing a fire, you should aim:
At the top of h flames
At the base of the flames
In the middle of the flames
When should you be allowed to horse around, and push or shove in the shop:
Whenever you want
Never
Sometimes
OSHA has designated that it is safe to listen to ____ decibels for 8 hours:
80
85
95
100
Gloves provide protection from:
Heat
Cold
UV Light
All of the Answers
It is important to develop safe work habits:
True
False
Gloves should be worn at all times in the shop:
True
False
All safety glasses must have an ANSI Z-87 approval:
True
False
If a student is determined to be a safety risk, they will be removed from the class for the rest of the year:
True
False
What should you do if you see someone get injured in the shop?
Stay calm and call for help
Notify the instructor
Trust that someone will know what to do
Both A and B
What do you need to do before exiting the shop during an evacuation drill?
Turn off all equipment
Put your safety glasses away
Put your projects way as to not lose them
Where is the eye wash station in the shop?
By the shop door
In the sink/hand washing station
Around the corner from the sink by the Ag Office Window
Just outside of Mr. Corbett’s classroom door
Where is the fire extinguisher in the shop?
By the shop door
In the sink/hand washing statement
Around the corner from the sink by the Ag Office Window
Just outside of Mr. Corbett’s classroom door
Where is the circuit breaker box in the shop?
By the shop door
In the sink/hand washing statement
Around the corner from the sink by the Ag Office Window
Just outside of Mr. Corbett’s classroom door
How should you communicate with others during an emergency in the shop?
Speak clearly and follow procedures
Stay Calm and listen to the instructor or emergency responders
Quickly as this is a state of emergency
Both A and B
What information can be found on a Safety Data Sheet(SDS)?
Hazards and first-aid measures for a chemical
Proper Handling
Storage Instructions
All of the above
What should you NOT do if a chemical is accidentally spilled in the shop?
Notify the instructor
Follow the spill response procedure
Leave it to air dry since it could be dangerous to come in contact with
Use proper clean-up materials
Use glues and solvents in well ventilated areas and avoid ignition sources.
True
False
It is dangerous to mix different chemicals without proper knowledge or instruction.
True
False
Long or bulky stock should be carried by yourself so as to not disrupt other student’s work.
True
False
Always use your back when lifting heavy objects.
True
False
What is the correct posture to use when lifting a heavy object?
Bend at the knees, round you back, and lift with your back
Bend at the knees, keep your back straight, and lift with your legs - not your back
Keep your legs straight, bend at the hips, and lift with your back
Why is it important to inspect tools before using them in the shop?
To ensure they are safe to use and not damaged
To prevent accidents or equipment failure
To identify any needed repairs or maintenance
All of the above
When a tool is broken, you and a friend can fix it without the instructor’s approval as long as you know how to do it properly.
True
False
What is a sign that a hand tool might be unsafe to use?
A cracked handle
Loose/missing part
Blade is dull, chipped, or bent
All of the above
Keep the edges of tools sharp. Dull tools require more pressure and can cause injury.
True
False
If I am unclear on any safety procedures or directions, I will ask my instructor for clarification.
True
False
