Worksheets103 W2C
Total questions: 30
Worksheet time: 30mins
Name
Class
Date
1.
What is the initial basis for testing information?
a)
A) Historical performance data
b)
B) Manufacturer's specifications
c)
C) Equipment maintenance records
d)
D) Testing standards and regulations
2.
How can testing specifications and data be used beyond initial testing?
a)
A) To determine maintenance schedules
b)
B) To compare against historical performance
c)
C) To set new industry standards
d)
D) To design new equipment
3.
What method is commonly used for carrying out soundness tests and certification?
a)
A) Electrical testing
b)
B) Hydrostatic/pneumatic methods
c)
C) Magnetic resonance imaging (MRI)
d)
D) Visual inspections
4.
What document provides instructions for safe use and highlights potential hazards associated with materials, products, or processes?
a)
A) Maintenance/Inspection documents
b)
B) Safety work sheet (SWS)
c)
C) Material safety data sheet (MSDS)
d)
D) Inspection Data Records (IDR)
5.
What does ITP stand for in the context of engineering work?
a)
A) Internal Testing Protocol
b)
B) Inspection and Test Plan
c)
C) In-Service Testing Procedure
d)
D) Internal Technical Procedure
6.
In which stages of engineering work are Inspection and Test Plans (ITPs) used?
a)
A) Only during the construction phase
b)
B) During manufacture, construction, and operation phases
c)
C) Only during the operation phase
d)
D) During maintenance and repair phases
7.
What is the main purpose of an Inspection Method Statement?
a)
A) To provide historical performance data
b)
B) To outline the hazards involved in an inspection
c)
C) To capture comments and results from readings
d)
D) To describe the company's organizational structure
8.
What are the key components of occupational safety and health, spill-handling procedures, and product stewardship?
a)
A) Safety work sheets (SWS)
b)
B) Inspection Data Records (IDR)
c)
C) Material safety data sheets (MSDS)
d)
D) Inspection and Test Plans (ITPs)
9.
Where should Data sheets for hazardous materials be accessible?
a)
A) In a locked cabinet
b)
B) In a remote storage facility
c)
C) In the area where the chemicals or activity will occur
d)
D) In the company's central records
10.
What is the main purpose of Product Worksheet & Inspection Records?
a)
A) To document the company's financial status
b)
B) To outline the company's manufacturing process
c)
C) To provide instructions for safe use and highlight potential hazards
d)
D) To detail inspection, work task, or process procedures
11.
What does the term "technical specification" refer to?
a)
A) A document that outlines the company's organizational structure
b)
B) A set of requirements that a product or assembly must meet
c)
C) A marketing brochure promoting a new product
d)
D) A document detailing historical performance data
12.
How would you describe a product that is considered "out of spec"?
a)
A) It is functioning perfectly according to specifications
b)
B) It has surpassed the specified requirements
c)
C) It fails to meet all the specified requirements
d)
D) It is still in the process of being designed
13.
What is the primary purpose of a requirement specification?
a)
A) To provide details about a product's historical performance
b)
B) To outline the company's manufacturing processes
c)
C) To document the specific requirements for a material, design, or product
d)
D) To offer information on maintenance procedures
14.
How does a functional specification relate to a requirement specification?
a)
A) It offers insights into maintenance procedures
b)
B) It describes the company's organizational structure
c)
C) It highlights historical performance metrics of a product
d)
D) It may include functional block diagrams and describe the designed solution
15.
What does an "in-service" or "maintained as" specification typically address?
a)
A) The initial state of a system or object
b)
B) The impacts of wear and maintenance after years of use
c)
C) The manufacturer's specifications
d)
D) The safety information associated with a product
16.
Which of the following is usually not part of specifications and supporting documents?
a)
A) Manufacturer's specifications
b)
B) Maintenance / Inspection documents
c)
C) Workshop & parts manuals
d)
D) Employee resumes
17.
What type of information can be found in workshop & parts manuals?
a)
A) Financial statements of the company
b)
B) Guidelines for diagnosing faults
c)
C) Historical performance data
d)
D) Marketing materials for the product
18.
What is the primary purpose of testing specifications and data?
a)
A) To provide a historical overview of the company
b)
B) To evaluate the current performance of equipment
c)
C) To describe the company's manufacturing processes
d)
D) To list the company's code of conduct
19.
Which type of test is typically used for equipment/systems after installation or upgrade?
a)
A) Soundness test
b)
B) Visual inspection
c)
C) Software compatibility test
d)
D) Marketing test
20.
What does the issuance of a Certificate Issued for records signify after a successful equipment soundness test?
a)
A) It indicates equipment faults that need immediate repair.
b)
B) It confirms that no testing has been conducted.
c)
C) It certifies that the equipment has passed the soundness test.
d)
D) It is a warranty certificate.
21.
What is the primary purpose of a Pre-Job Briefing (PJB)?
a)
A) To evaluate job performance
b)
B) To ensure clear understanding of tasks and safety precautions
c)
C) To conduct post-job inspections
d)
D) To gather information from team members
22.
What is a Post-Job Debrief used for?
a)
A) Conducting pre-job inspections
b)
B) Checking work/task alignment with the plan
c)
C) Performing equipment maintenance
d)
D) Conducting safety training
23.
What is another term for a Tool Box Talk?
a)
A) Pre-Project Discussion
b)
B) Post-Job Debrief
c)
C) Pre/Post-Job Briefing
d)
D) Inspection Checklist
24.
Who initially recommends servicing, maintenance, and inspection schedules?
a)
A) Manufacturers
b)
B) Inspectors
c)
C) Government agencies
d)
D) Safety officers
25.
What factors should be considered when determining maintenance and inspection schedules?
a)
A) Geographical location only
b)
B) Manufacturer's guides only
c)
C) Frequency and type of servicing, inspection intervals, and more
d)
D) None of the above
26.
What is the Written Scheme of Examination (WSE) used for?
a)
A) To perform pre-job inspections
b)
B) To determine inspection schedules
c)
C) To evaluate geographical locations
d)
D) To gather post-job information
27.
What factors can influence maintenance and inspection schedules?
a)
A) Geographical location and environmental conditions
b)
B) Manufacturer's recommendations only
c)
C) Frequency of team meetings
d)
D) Employee work hours
28.
In the context of inspection schedules, what does "Distance Travelled and Timescales" refer to?
a)
A) The time it takes to complete inspections
b)
B) The duration of employee breaks
c)
C) The distance a vehicle or equipment travels
d)
D) The number of inspection checklists used
29.
What role does the Installation Safety Case play in determining maintenance and inspection schedules?
a)
A) It provides manufacturer recommendations
b)
B) It sets production requirements
c)
C) It determines the schedule for pre-job briefings
d)
D) It influences maintenance and inspection schedules based on safety elements
30.
What are Safety Critical Elements/Components within an organization?
a)
A) Regular inspection tools
b)
B) Plant equipment
c)
C) Employee workstations
d)
D) Emergency exits
100 %
