wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

HVAC Mod 1- Intro to HVAC

Total questions: 19

Worksheet time: 19mins

Name
Class
Date
1.

In a typical system, in which component would the refrigerant change from a liquid to a vapor?

a)
Condenser
b)
Receiver dryer
c)
Evaporator
d)
Compressor
2.

Which component raises the pressure of the vapor?

a)

Compressor

b)

Condenser

c)

Evaporator

d)

Thermal Xpansion Valve

3.

Where does the low pressure liquid become a low pressure vapor?

a)

Evaporator

b)

Condenser

c)

TX valve

d)

Compressor

4.

In what state is the refrigerant when it exits the condenser?

a)

High pressure gas

b)

Low pressure gas

c)

High pressure liquid

d)

Low pressure liquid

5.

The main components of the Refrigeration system are

a)

Thermistor, condenser, flow control and an evaporator.

b)

Fan blower, condenser, flow control and an evaporator.

c)

Compressor, condenser, metering device, evaporator.

d)

Drainage, condenser, flow control and an evaporator.

6.

Where would you expect to find a high pressure liquid within an AC system?

a)

Between the Compressor and the Metering Device

b)

Between the Metering Device and the Evaporator

c)

Between the compressor and the condenser

d)

Between the Condenser and the Metering Device.

7.

Heat will always travel:

a)

in a straight line

b)

from top to bottom

c)

from hot to cold

d)

from cold to hot

8.

The proper name of the Valve Core:

a)

Poppet Valve

b)

Piston Valve

c)

Schrader Valve

d)

Stem Fitting

9.

Compressor not engaging. Gauges showing pressure at 160 psi on both High and Low side. Fuses check out as good. What should be done next?

a)

Check Power and ground at Compressor

b)

Recover

c)

Charge .5 pound

d)

Charge 1.5 pounds

e)

Vaccum and Leak Test

10.

Systems that use water or steam as a source of heating are known as____

a)

Natural Gas

b)

Coal

c)

Hydronic

d)

Split

11.

_______ is when fresh air is introduced into a space in order to control air quality.

a)

Air Conditioning

b)

Ventilation

c)

Refrigeration

d)

Fan

12.

______ is used to control bacteria, fungi, and other microorganisms in the A/C unit/

a)

Humidity

b)

Soap

c)

Chlorine

d)

Ultraviolet Light

13.

What type of gases does a furnace produce?

a)

Carbon Monoxide

b)

Carbon Dioxide

c)

Tetrafluorormethane

d)

Sulfur Hexafluoride

14.

Company that specializes in the installation, construction, maintenance, and repair of HVAC equipment.

a)

Electrical Contractor

b)

Mechanical Contractor

c)

General Contractor

d)

EPA Contractor

15.

Refrigerants containing ______ can damage the ozone layer.

a)

Ammonia

b)

Oxygen

c)

Nitrogen

d)

Chlorine

16.

_______ refrigerants can be resold.

a)

Recycled

b)

Reclaimed

c)

Recovered

d)

Removed

17.

Local Building Codes are based on ______

a)

Code of Federal Regulations

b)

State Building Code

c)

International Building Code

d)

International HVAC Code

18.

Large Hydronic Cooling Units are referred to as ?

a)

Chillers

b)

Ground Source

c)

Mechanical

d)

Boilers

19.

How many on-the-job Learning hours annually are required during an apprenticeship.

a)

8000

b)

4000

c)

2000

d)

1000