Free Printable TD AutoCAD

1.

What a hidden line used for?

a)

To represent an edge not visible

b)

To show an alternate position

c)

To represent a line of symmetry

d)

To eliminate a section of drawing not needed because of size

2.

From which direction does AutoCAD start measuring angles?

a)

12 o'clock

b)

6 o'clock

c)

3 o'clock

d)

9 o'clock

3.

Which command will create round corners?

a)

Fillet

b)

Round

c)

Chamfer

d)

Circle

4.

If you draw a line at 90 degrees, it will point ________

a)

Left

b)

Up

c)

Down

d)

Right

5.

If you draw a line at 180 degrees, it will point ________

a)

Left

b)

Up

c)

Down

d)

Right

6.

What is this AutoCAD icon

a)

Move

b)

Expand out

c)

Pull in

d)

Explode

7.

What is this AutoCAD icon?

a)

Explode

b)

Join

c)

3D mode

d)

Rotate

8.

What Key Combination will Undo a command?

a)

CTRL+W

b)

CTRL+U

c)

CTRL+A

d)

CTRL+Z

9.

The tool ______ is used to cut things down, but not completely erase the entire object. The ________ tool used to make a line/circle/arc/polygon reach a certain located point if it is not touching.

a)

Trim & Extend

b)

Extend & Trim

c)

Copy & Paste

d)

Erase & Trim

10.

The tool ______ is used to cut things down, but not completely erase the entire object. The ________ tool used to make a line/circle/arc/polygon reach a certain located point if it is not touching.

a)

Trim & Extend

b)

Extend & Trim

c)

Copy & Paste

d)

Erase & Trim

11.

Which tool is used to move a line/circle/polygon/ellipse a certain specified distance away from the original.

a)

Copy

b)

Move

c)

Offset

d)

Mirror

12.

Which tool is used to make an object reflect its self across an axis?

a)

Offset

b)

Mirror

c)

Copy

d)

Move

13.

The file format for CAD drawings is...

a)

jpg

b)

pdf

c)

docx

d)

dwg

14.

What Does AutoCad mean?

a)

Automatic Calibrated Drawing

b)

Automatic Computer Artificial Drawing

c)

Automatic Computer-Aided Drawing

d)

Automatic Computer Active Drawing

15.

AutoCAD can only create 2D images.

a)

True

b)

False

16.

Images in AutoCAD are only drawn in 1 layer.

a)

True

b)

False

17.

CAD stands for

a)

cats and dogs

b)

computer aided driving

c)

computers and drawing

d)

computer aided design

18.

CAD commands such as LINE, CIRCLE, and ARC and other basic CAD figures are examples of:

a)

Edit commands.

b)

Modify commands.

c)

Draw commands.

19.

AutoCAD is a product of Autodesk.

a)

True

b)

False

20.

AutoCAD makes it easier to edit your drawings than manual drafting.

a)

True

b)

False

21.

True of False: To deselect an object from the selection set, hold down the (Shift) key and select the object again.

a)

True

b)

False

22.

True or False: The save command can also be activated with the quick-key combination of (CTRL)+ (S)

a)

True

b)

False

23.

Which key can be used to quickly cancel a command?

a)

backspace

b)

esc

c)

tab

d)

enter

24.

My Technical Drawing teacher's name is...

a)

Teacher

b)

Mr. Scott

c)

Mr. Trung

25.

Name one of the three types of arrays you can create

(a)

26.

Which CAD command creates multiple copies of objects in a pattern?

a)

Array

b)

Rotate

c)

Extend

27.

Even though these are circles, this is style an example of a ___________ array type.

a)

grid

b)

rectangular

c)

triangular

d)

round

28.

1.WHICH KEY STROKE WILL UNDO A COMMAND?

a)

CTRL+N

b)

CTRL + R

c)

CTRL+Z

d)

CTRL + U

29.

WHICH SHORTCUT KEY STANDS FOR OBJECT SNAP TRACKING?

a)

F9

b)

F10

c)

F11

d)

F12

30.

The LINE command in ORTHO mode

a)

draws only horizontal lines

b)

draws only vertical lines

c)

draws only horizontal and vertical lines

d)

draws only digonal lines

31.

CAD stands for

a)

Computer-Aided Design

b)

Computer-Animated Drawing

c)

Code-Animated Design

d)

Code-Animated Drawing

32.

Identify the Grid tool.

a)

A.

b)

B.

c)

C.

d)

D.

e)

E.

33.

Identify the OSnap tool.

a)

A.

b)

B.

c)

D.

d)

E.

e)

F.

34.

Identify the Ortho tool.

a)

A.

b)

B.

c)

C.

d)

E.

e)

F.

35.

Identify the Grid tool.

a)

A.

b)

B.

c)

C.

d)

D.

e)

E.

36.

Identify the OSnap tool.

a)

A.

b)

B.

c)

D.

d)

E.

e)

F.

37.

Identify the Ortho tool.

a)

A.

b)

B.

c)

C.

d)

E.

e)

F.

38.

WHAT IS THIS SYMBOL?

a)

LINE

b)

ARC

c)

POLYLINE

d)

CURVE

39.

Shortcut to the "Pan" command

a)

F7

b)

Tab

c)

Right Button Click

d)

Push mouse wheel as a button

40.

this symbol refer to?

a)

arrow

b)

move

c)

stretch

d)

pan

41.

Which of the following is NOT specified when drawing a polygon?

a)

center point

b)

circle radius

c)

mirror axis

d)

number of sides

42.

1.WHICH KEY STROKE WILL UNDO A COMMAND?

a)

CTRL+N

b)

CTRL + R

c)

CTRL+Z

d)

CTRL + U

43.

WHICH SHORTCUT KEY IS USED FOR GRID DISPLAY?

a)

F3

b)

F5

c)

F7

d)

A.F10

44.

WHICH SHORTCUT KEY STANDS FOR OBJECT SNAP TRACKING?

a)

F9

b)

F10

c)

F11

d)

F12

45.

WHICH SHORTCUT KEY IS USED TO SET THE ORTHO MODE ON AND OFF?

a)

F2

b)

F4

c)

F8

d)

F9

46.

The file format for CAD drawings is...

a)

.jpg

b)

.dwg

c)

.bmp

d)

.doc

47.

WHAT IS THIS SYMBOL?

a)

LINE

b)

ARC

c)

POLYLINE

d)

CURVE

48.

CAD commands such as LINE, CIRCLE, and ARC and other basic CAD figures are examples of:

a)

Edit commands.

b)

Modify commands.

c)

Draw commands.

d)

Create commands.

49.

AutoCAD makes it easier to edit your drawings than manual drafting.

a)

True

b)

False

50.

When drawing 2D in AutoCAD, what axis do you NOT work with?

a)

X

b)

Y

c)

Z

d)

RE

51.

To end the line command you can either left click the mouse and select ______ or press ______ on the keyboard

a)

Space Bar

b)

Esc

c)

Backspace

d)

Enter

52.

To deselect an object from the selection set, hold down the (Shift) key and select the object again.

a)

True

b)

False

53.

Which key can be used to quickly cancel a command?

a)

backspace

b)

esc

c)

tab

d)

enter

54.

What is the shortcut command to draw a circle?

a)

CO

b)

CI

c)

C

d)

O

55.

To copy an object, the shortcut command is _________.

a)

C

b)

CC

c)

CP

d)

CO

56.

What is the shortcut command to erase an object?

a)

X

b)

DEL

c)

E

d)

ER

57.

To rotate an object, the shortcut command is __________?

a)

RO

b)

R

c)

E

d)

RR

58.

The <spacebar> may be used as the <enter> key in AutoCAD.

a)

So true

b)

Say what? No way!

59.

Which Application panel is the line command located?

a)

Layers

b)

Draw

c)

Modify

d)

Annotate

60.

Shortcut to the "Pan" command

a)

F7

b)

Tab

c)

Right Button Click

d)

Push mouse wheel as a button

61.

this symbol refer to?

a)

arrow

b)

move

c)

stretch

d)

pan

62.

Which of the following is NOT specified when drawing a polygon?

a)

center point

b)

circle radius

c)

mirror axis

d)

number of sides

63.

The ______ command is used to move the drawing across the display area without changing the magnification.

a)

Hide

b)

Pan

c)

Trim

d)

Zoom

64.

What does CAD stand for?

a)

Computer Aided Design

b)

Computer Assisted Drawing

c)

Computer Activated Drafting

d)

Computer Activated Drawing

65.

To create a duplicate, opposite FLIPPED shape, use the _____ command?

a)

Mirror

b)

Array

c)

Copy

d)

Symmetry

66.

To set the drawing units in AutoCAD, _______ is the shortcut key to display the Drawing Setup dialog box.

a)

U

b)

UU

c)

DU

d)

UN

67.

To set the drawing units in AutoCAD, _______ is the shortcut key to display the Drawing Setup dialog box.

a)

U

b)

UU

c)

DU

d)

UN

68.

In what units do we draw in AutoCAD?

a)

Inches

b)

Meters

c)

Centimeters

d)

Millimeters

69.

A rectangle has 4 equal sides!

a)

TRUE

b)

FALSE

70.

All angles in a Circle is equals to 360 degrees

a)

TRUE

b)

FALSE

71.

What is the name of a Triangle with all its sides and angles equal?

a)

Scalene triangle

b)

Isosceles triangle

c)

Equilateral triangle

d)

Right-angle triangle

72.

_ controls endpoints, midpoints, and other snap points.

a)

offset [o]

b)

Ortho

c)

move [m]

d)

Osnap

73.

To make a flipped copy of an object over a center line, use _.

a)

mirror [m]

b)

move [m]

c)

line [l]

d)

explode

74.

To break an object or block into separate pieces and lines, use _.

a)

mirror [mi]

b)

explode

c)

copy [co]

d)

hatch [h]

75.

To make two lines come together in a CURVE, use _.

a)

copy [co]

b)

fillet [f]

c)

chamfer [cha]

d)

explode

76.

To make an object spin around a center point, use _.

a)

rotate [ro]

b)

trim [tr]

c)

move [m]

d)

fillet [f]

77.

To move an object from one place to a different place, use _.

a)

copy [co]

b)

mirror [mi]

c)

move [m]

d)

rotate [ro]

78.

To cut a line where it intersects with another line, use _.

a)

offset [o]

b)

trim [tr]

c)

move [m]

d)

mirror [mi]

79.

To draw a rectangle, use _.

a)

trim [tr]

b)

move [m]

c)

rectangle

d)

ellipse [el]

80.

Osnap looks like _.

a)

b)

c)

d)

81.

Ortho looks like _.

a)

b)

c)

d)

82.

To force AutoCAD to only move up and down and left and right, use _.

a)

Ortho

b)

Osnap

c)

Grid

d)

Polar Tracking

83.

To create snap points that will "grab" objects and snap them like a magnet, use _.

a)

Grid

b)

Ortho

c)

Osnap

d)

Polar Tracking

84.

The shortcut command for drawing a line is ______.

a)

LI

b)

LIN

c)

L

d)

LL

85.

What is the shortcut command to draw a circle?

a)

CO

b)

CI

c)

C

d)

O

86.

To copy an object, the short command is _________.

a)

C

b)

CC

c)

CP

d)

CO

87.

What is the shortcut command to erase an object?

a)

X

b)

DEL

c)

E

d)

ER

88.

To rotate an object, the shortcut command is __________?

a)

RO

b)

R

c)

E

d)

RR

89.

To set the drawing units in AutoCAD, _______ is the shortcut key to display the Drawing Setup dialog box.

a)

U

b)

UU

c)

DU

d)

UN

90.

The <spacebar> may be used as the <enter> key in AutoCAD.

a)

So true

b)

Say what? No way!

91.

Once you have selected offset the first operation is to ______ and the cursor will turn into a square.

a)

click on the screen

b)

enter a distance

c)

copy a line

d)

window an object

92.

Which command will create round corners?

a)

Fillet

b)

Round

c)

Chamfer

d)

Circle

93.

The erase command is in which application panel?

a)

Layers

b)

Draw

c)

Modify

d)

Annotate

94.

True or False: The save command can also be activated with the quick-key combination of (CTRL)+ (S)

a)

True

b)

False

95.

Shortcut to the "Pan" command

a)

F7

b)

Tab

c)

Right Button Click

d)

Push mouse wheel as a button

96.

L enter on the keyboard =

a)

LIST / Displays property data for selected objects.

b)

LINE / Creates straight line segments.

c)

LAYOUT / Creates and modifies drawing layout tabs.

d)

LINETYPE / Loads, sets, and modifies linetypes.

97.

this symbol refer to?

a)

arrow

b)

move

c)

stretch

d)

pan

98.

Two or more circles of different sizes that share the same center point are considered to be?

a)

Concentric

b)

a Sector

c)

a Chord

d)

Circumference

99.

An electronic method of producing technical drawings is called?

a)

CAD

b)

CAT

c)

CAM

d)

ATM

100.

Identify icon 3.

a)

radius

b)

diameter

c)

polar tracking

d)

polar array

101.

Identify icon 4.

a)

square

b)

endpoint

c)

block

d)

object snaps

102.

Identify icon 5.

a)

poly line

b)

grip

c)

endpoint

d)

line

103.

Identify the icon #7.

a)

center diameter

b)

center radius

c)

tan tan radius

d)

center

104.

Identify the icon #6.

a)

linetype

b)

curve

c)

polyline

d)

arc

105.

Identify the icon #8.

a)

arc

b)

bend

c)

curve

d)

midpoint

106.

Identify the icon #9.

a)

endpoint

b)

start, end, radius

c)

rectangle

d)

square

107.

Identify the icon #10.

a)

oval

b)

ellipse

c)

eclipse

d)

oblong

108.

Identify the icon #11.

a)

hatch

b)

shade

c)

color

d)

fill

109.

Identify icon 12.

a)

cross

b)

hatch

c)

move

d)

pan

110.

Identify icon 13.

a)

copy

b)

duplicate

c)

pattern

d)

copy selection

111.

Identify icon 14.

a)

move

b)

extend

c)

stretch

d)

scale

112.

Identify icon 15.

a)

scale

b)

stretch

c)

block

d)

array

113.

Identify icon 16.

a)

copy

b)

copy selection

c)

delete

d)

array

114.

Identify icon 17.

a)

offset

b)

move

c)

distance

d)

open

115.

Identify icon 18.

a)

delete

b)

pencil

c)

erase

d)

remove

116.

Identify icon 19.

a)

block

b)

3D

c)

explode

d)

apart

117.

Identify icon 20.

a)

offset

b)

explode

c)

pan

d)

erase

118.

Identify icon 21.

a)

around

b)

rotate

c)

array

d)

circle

119.

Identify icon 22.

a)

extend

b)

cut

c)

trim

d)

seperate

120.

Identify icon 23.

a)

A

b)

write

c)

text

d)

alphabet

121.

Identify icon 24.

a)

diameter

b)

distance

c)

line

d)

dimension

122.

Identify the column in problem 25.

a)

draw

b)

build

c)

create

d)

modify

123.

Identify the column in problem 26.

a)

draw

b)

build

c)

annotate

d)

modify

124.

Identify the column in problem 27.

a)

annotation

b)

draw

c)

text

d)

dimension

125.

Identify the column in problem 28.

a)

new layer

b)

linetype

c)

product

d)

properties

126.

Identify the icon.

a)

navigation bar

b)

3D

c)

view cube

d)

zoom

127.

Identify the icon.
<

a)

Less than

b)

New angle

c)

Angel override

d)

Greater than

128.

_________ command is used to change the angular DEGREE position of an object with respect to the current orientation.

a)

Copy

b)

Move

c)

Rotate

d)

Scale

129.

The _________command is used to lengthen a line to meet an edge.

a)

Extend

b)

Move

c)

Scale

d)

Trim

130.

What command is used to create lettering with a CAD system?

a)

Dimension

b)

Layer

c)

Style

d)

Text

131.

(F) AND ENTER

a)

FINAL

b)

F7

c)

CHAMFER

d)

FILLET

132.

DIM (A)

a)

LOCATION

b)

SIZE

133.

To create a duplicate, opposite FLIPPED shape, use the _____ command?

a)

Mirror

b)

Array

c)

Copy

d)

Symmetry

134.

The ___ command provides the length of an object but does not place a dimension line on the drawing?

a)

Annotate

b)

Distance

c)

Leader

d)

Baseline

135.

Are both of these lines tangent to two circles?

a)

Yes

b)

No

c)

Not enough information is given

d)

Only L1

136.

This is an example of..

a)

Nestimg

b)

Circle Tangent to Two Circles

c)

Quadrants

d)

Circular Pattern

137.

Name that "Drawing Symbol."

a)

Depth

b)

Radius

c)

Diameter

138.

A line that is short and long dashes that represents a circle or hole is known as which?

a)

Object Line

b)

Hidden Line

c)

Construction Line

d)

Center Line

139.

What type of line is this?

a)

Object

b)

Construction

c)

Centerline

140.

Clean lines are used in this type of drawing

a)

Isometric

b)

Orthographic

c)

Technical Drawing

d)

Sketch

141.

Technical drawings DO NOT require drawing tools

a)

True

b)

False

142.

The type of technical drawing pictured here

a)

Endothermic

b)

Isometric

c)

Orthographic

d)

Explosive

143.

What is it called??

a)

Protractor

b)

Compass

c)

Graphite pencil

d)

The 60

144.

What is it called??

a)

Graduated ruler

b)

Rubber

c)

The 45

d)

The 60

145.

What is it called??

a)

Stylograph

b)

Mechanical propelling pencil

c)

Graphite pencil

d)

Colour pencils

146.

What is it called??

a)

Graphite pencil

b)

Mechanical propelling pencil

c)

Stylograph

d)

Felt pens

147.

What is it called??

a)

Protractor

b)

The 45

c)

The 60

d)

Graduated ruler

148.

What is it called??

a)

Rubber

b)

Ruler

c)

Sharpener

d)

Pencil

149.

What is it called??

a)

Rubber

b)

Ruler

c)

Pen

d)

Sharpener

150.

What is it called??

a)

Stylograph

b)

Pen

c)

Mechanical propelling pencil

d)

Pencil

151.

What is it called??

a)

The 60

b)

Graduated ruler

c)

The 45

d)

Protractor

152.

What is it called??

a)

The 60

b)

Graduated ruler

c)

The 45

d)

Protractor

153.

What is the name of this drawing instrument?

a)

L Square

b)

T Square

c)

Ruler

d)

Carpenter's Square

154.

What is the name of this drawing instrument?

a)

Triangle

b)

French Curve

c)

Pencil

d)

Compass

155.

It is used to draw horizontal line.

a)

T Square

b)

30x60 triangle

c)

Protractor

d)

Divider

156.

What is the name of this drawing instrument?

a)

Hip Curve

b)

Flexible Curve

c)

French Curve

d)

Road Curve

157.

It is used to measure angles.

a)

Triangle

b)

Ruler

c)

Divider

d)

Protractor

158.

It is used to draw circles and arcs.

a)

Divider

b)

Ruler

c)

Compass

d)

Protractor

TD AutoCAD

Total questions: 158

Worksheet time: 5hrs 15mins

Similar Resources on Wayground