NEW
Font size
WorksheetsRainwater Systems Installation L3P2U8,1.9
Total questions: 15
Worksheet time: 8mins
What should be checked before installing gutters in new build properties?
The material of the fascia board
The color of the gutter
The type and profile of the gutter
The size of the windows
How should gutters be laid for proper installation?
With a rise of 1:600
With a rise of 1:500
With a fall of 1:600
With a fall of 1:500
What should be used to fix fascia brackets along the length of the string line?
60mm x 10 zinc plated screws
50mm x 10 zinc plated screws
40mm x 10 zinc plated screws
30mm x 10 zinc plated screws
How should the gutter be clipped into place when installing it into the fascia brackets?
By pulling the back of the gutter and the bracket downwards together
By pulling the front of the gutter and the bracket upwards together
By pushing the back of the gutter and the bracket downwards together
By pushing the front of the gutter and the bracket upwards together
What should be done first when installing rainwater pipes?
Cut a length of rainwater pipe
Measure the distance between the spigot and the connection to drain
Fabricate and install the swan neck bend
Install the pipework
What is the correct pipe clip distance for a 55mm rainwater pipe in the vertical direction?
1.5m
1.2m
1.0m
2.0m
What is the correct pipe clip distance for a 62mm rainwater pipe in the horizontal direction?
1.0m
1.5m
0.6m
1.2m
How can rainwater pipes be connected to a drainage system?
Via a hail connector
Via a snow connector
Via a rainwater shoe
Via a wind connector
What should be checked before installing gutters in existing installations?
The type of drainage system being used
The type of roofing material
The type of window frames
The type of wall paint
What should be used to fix gutter brackets at the high points on the system?
30mm x 10 zinc plated screws
40mm x 10 zinc plated screws
50mm x 10 zinc plated screws
60mm x 10 zinc plated screws
What should be used to fix the rainwater pipe back to the wall?
60mm x 10 zinc plated screws
30mm x 10 zinc plated screws
40mm x 10 zinc plated screws
50mm x 10 zinc plated screws
What should be used to fasten the rainwater pipe back to the wall?
Plastic wall plugs
Concrete wall plugs
Metal wall plugs
Wooden wall plugs
What should be used to fix gutter brackets for buildings without fascia boards?
Galvanized steel top fitted rafter irons
Galvanized steel side fitted rafter irons
Galvanized steel bottom fitted rafter irons
Galvanized steel middle fitted rafter irons
What should be used to drive in rise and fall irons for buildings without fascia boards or exposed rafters?
Concrete rise and fall irons
Plastic rise and fall irons
Metal rise and fall irons
Wooden rise and fall irons
What should be used to connect rainwater pipes to a soakaway?
A rainwater shoe
A drain connector
A gulley
A suitable drain connector
