WorksheetsJobsite Safety
Total questions: 16
Worksheet time: 8mins
One source of lead on jobsites is _________.
water
paint
pipes
pencils
Positive and negative fit checks on your respirator should be performed when?
Tomorrow.
Every time you wear it.
Once per week.
Once per month.
Vertical lifelines must have a minimum breaking strength of __________.
2,000 pounds
3,000 pounds
4,000 pounds
5,000 pounds
Lanyards without shock absorbing features are used for _____________.
climbing
positioning
hanging
falling
What is the highest safe standing level on an extension ladder?
Second rung from the top.
Third rung from the top.
Fourth rung from the top.
The ground.
What percentage of all accidental deaths in the construction industry are caused by slips, trips, and falls?
5%
10%
15%
20%
OSHA's 29 CFR, Part 1926.1153 is known as the _____________.
fall protection standard
WiFi login
silica standard
HAZCOM
What type of fire extinguisher is used to put out electrical fires?
Type A
Type B
Type C
Type D
When there is a hole on the wall or ground, what safety measures should be done?
The hole should be covered.
The hole should be camouflaged.
Jump over it.
Not my problem.
Benching systems are prohibited in which type of soil?
Type A.
Type B.
Type C.
Rock.
Companies with strong safety cultures usually have lower _________.
productivity
wages
morale
turnover
An unplanned event that may or may not result in property damage is known as a(n) ________.
accident
incident
mistake
potential injury
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of ___________.
acceptable risks
unsafe conditions
unavoidable hazards
unsafe acts
A measure of the probability, consequences, and exposure related to an event is referred to as _____________.
safety
evaluation
risk
hazard
The D-ring or support point on a safety harness should be placed __________.
between the shoulder blades
at the back of the neck
around the waist
over the rib cage
When Standing on a scaffold, it is important to confirm that _____________.
a competent person on the ground is holding the scaffold
The wheel brakes on the scaffold are locked in place
the path is clear for the scaffold to be rolled into location
only composite scaffolds are used when working near electricity lines
