WorksheetsElectrical Theory
Total questions: 22
Worksheet time: 11mins
Zoe and Nora are working on a science project about electricity. They are trying to understand a particular concept. Can you help them understand what is meant by 'current flow'?
It is the flow of voltage in a circuit they are working on
It is the impedance of the circuit they are working on
It is the inductive reactance of the circuit they are working on
It is the flow of electrons in the circuit they are working on
Benjamin, Jackson, and Rohan are studying for their electronics exam. They come across a term 'impedance'. Jackson thinks it's the opposition to alternating current flow. Benjamin thinks it's electrical pressure. Rohan thinks it's amperage. And, Benjamin's little brother thinks it's the voltage applied to the circuit. Who is correct?
Jackson
Benjamin
Rohan
Benjamin's little brother
Zoe is working on a science project and she needs to find a material that will readily release electrons. What should she use?
An insulator
a conductor
a resistance
a neutron
Avery, Anika, and Benjamin are working on a physics project. They need to measure the flow of electricity. Which symbol should they use to represent current?
E
I
R
W
Benjamin is studying about atoms and he learned that an electron has
no charge
a negative charge
a positive charge
extra electrons
Jackson, Ethan, and Lily are working on a science project involving a circuit. They are trying to understand a particular component of the circuit. What is the resistance that this component might provide?
Opposition to current flow
Electrical pressure
Amperage
Voltage applied to the circuit
Evelyn, Mason, and Benjamin are conducting an experiment in their physics class. They noticed that when they increase the voltage in their circuit, the current flow also increases. Which of the following statements about their observation is true?
Their observation indicates that current flow is the same as voltage
Their observation indicates that current flow will increase when voltage increases
Their observation indicates that current flow will increase when resistance increases
Their observation indicates that current flow will decrease when voltage increases
Ava, Harper, and Abigail are studying for their physics exam. They come across a problem where they need to determine the wattage in an electrical circuit. Which of the following formulas should they use?
W=E x I
W=E/R
W=I/R
W=ExR
Elijah is working on a project where he is using a motor. He notices that the running amperage marked on the motor data plate is lower than the calculated amperage using ohms law. Why would this be the case?
Benjamin suggests that the voltage applied to the circuit must be 240 Volts.
Mia thinks the electrical pressure is too low.
Elijah wonders if the amperage marked on the motor is wrong.
Benjamin suspects that the amperage marked on the motor is wrong.
Mia suggests that it could be due to the impedance to current flow.
Elijah is studying a type of drawing in his engineering class that illustrates where the components are located on a home appliance. What is this type of drawing called?
Pictorial
Schematic
Ladder Diagram
Outside
Grace, a technician, is installing a condensing unit at Nora's house. She is running three #10 THNN conductors from the disconnect to the unit using one red, one black, and one green wire. Lily, who is observing, asks Grace which color is used for ground. What should Grace reply?
Red
Black
Green
White
Daniel, Avery, and Olivia are working on a school project about Electrical wiring. They learned that a black colored wire usually indicates the;
safety ground
neutral conductor
ground conductor
hot conductor
James, Aiden, and Arjun are working on a science project involving a transformer. They are trying to identify the term used to describe the output side of the transformer. Can you help them?
low inductive side
High inductive side
primary side
secondary side
Ethan is a technician who is tasked with replacing a capacitor in a faulty device. What information must Ethan have to successfully complete his task?
Amperes, voltage and whether it is for a fan or compressor
Microfarads and whether it is a start or run capacitor
Volts and whether it is a start or run capacitor
Volts Capacitance and the type
Charlotte, Mia, and Ethan are working on a project that involves electrical circuits. They need to ensure the supply voltage variation stays within a certain limit. Which of the following is generally considered to be within the maximum allowable supply voltage variation?
25%
20%
15%
5%
Benjamin, a technician, has just replaced a start capacitor in Olivia's air conditioning unit. After powering up the compressor to check its operation, what should Benjamin do next?
Connect the ohmmeter to the potential relay to make sure the contacts open
Connect a manifold gauge set to make sure the compressor is pumping.
Connect a voltmeter to the coil of the potential relay
Clamp and amp meter around one lead to the capacitor to make sure it is deenergized after start up
Arjun is working on a science project about electric circuits. He learns that capacitors are always connected to the start winding. He is confused about how they are connected. Can you help him?
In parallel
In Serries
through a relay
through a diode
Arjun is working on a science project involving a capacitor. Before he can use his ohmmeter to test it, he needs to discharge the capacitor. How should he do this?
He should use a 20,000 ohm /2 watt resistor to short across the terminals.
He should use a screwdriver to short across the terminals.
He should touch the terminals with his bare fingers.
Sophia told him that capacitors do not need to be discharged prior to testing.
Noah is working on a project where he needs to use an ECM type Motor. Can you help him identify what an ECM type Motor is?
Efficient capacitor motor
Electronic commutated motor
Electrical Conductive motor
Electronic current motor
Maya and Grace are working on a science project. They wired two 20 ohm resistors in series for their project. What is the total resistance in their circuit?
80 ohms
40 ohms
20 ohms
10 ohms
Mason, Aria, and William are working on a science project where they have to wire three resistors in parallel. Two of the resistors they have are of 12 ohms each and one resistor is of 6 ohms. What would be the resistance of their circuit?
30 ohms
18 ohms
3 ohms
Its not possible to wire resistors of different values in parallel
Mia, a budding electronics enthusiast, is testing a capacitor with an analog ohmmeter. Kai and Evelyn are observing. What should the needle on the meter do?
show no deflection and remain on an infinite reading
deflect towards zero then return to infinite reading
deflect to zero and stay there
deflect halfway between zero and infinity and stay there
