Font size
Worksheets9.6 Electricity circuit (Mr. Chow)
Total questions: 35
Worksheet time: 17mins
cell
open switch
closed switch
battery
(a)
More than one
What needs to be done to this circuit so that the lamp lights up?
Close the switch
Add a power source and close the switch
Add another lamp and close the switch
Add another lamp and a switch
This is the symbol for a _____?
switch
light
battery
wires
Jasmine wants to use this circuit to produce sound. Which switch or switches does she need to close?
only Switch 2 and Switch 3
only switch 3
only Switch 1 and Switch 3
only switch 2
When the switch is closed, which bulbs will light up?
(Hint: electrical current cannot flow backwards)
Only bulb 5 will light up
Only bulbs 1, 2, 3, and 4 will light up.
None of the bulbs will light up
All of the bulbs will light up
When the switch is closed, which bulbs will light up?
(Hint: electrical current cannot flow backwards)
All of the bulbs will light up.
Only bulbs 3, 4, and 5 will light up
Only bulbs 2, 3, 4, and 5 will light up
None of the bulbs will light up.
When the switch is closed, which bulbs will light up?
(Hint: electrical current cannot flow backwards)
None of the bulbs will light up
Only bulbs 1, 2, and 5 will light up
Only bulbs 4 and 5 will light up.
Only bulbs 3, 4, and 5 will light up.
(a)
Circuit 1 is a closed circuit, and circuit 2 is an open circuit.
Circuits 1 and 2 are closed circuits.
Circuits 1 and 2 are open circuits
Circuit 1 is an open circuit, and circuit 2 is a closed circuit.
A circuit is built with a battery, two lightbulbs, and a switch as shown above. What will likely happen with the circuit?
Both lightbulbs will be off.
Both lightbulbs will be on.
Lightbulb 1 will be on and lightbulb 2 will be off.
Lightbulb 2 will be on and lightbulb 1 will be off.
Voltmeter
Battery (multiple cells)
Which of the following are true about the image shown?
It is a voltmeter
Measures voltage in unit volts (V)
Measures voltage in unit Ampere (A)
Needs to be attached parallel to the component measured.
Needs to be attached in series with the component measured.
Which of the following are true about the image shown?
It is a voltmeter
Measures voltage in unit volts (V)
Measures current in unit Ampere (A)
Needs to be attached parallel to the component measured.
Needs to be attached in series with the component measured.
(a)
Wire
Open switch
Closed switch
Fuse
Which of the following is the symbol for a lamp?
Which of the following are true about this circuit?
It is an open circuit
It is a closed circuit
Current cannot flow in this circuit
The lamp lights up
cell
open switch
battery
closed switch
open switch
cell
closed switch
battery
When one light bulb is broken, all the other light bulbs will not light up.
In which of the following circuit will this happen?
in which circuit will the light bulb be the brightest?
1
2
3
All has bulbs with the same brightness
In a series circuit... (select all that apply)
the current is the same through all components
the voltage is the same through all components
the resistance is the same through all components
Total voltage = V1 + V2 + ...
R1=R11+R21+...
Which circuit below would be described as a "closed" circuit?
In an electrical circuit, the current flows from the ________ terminal to the ________ terminal.
positive, negative
negative, positive
northern, southern
southern, northern
The current in this circuit flows in a __________ direction from this view point.
clockwise
anti-clockwise
Which of the following is true about component P?
Used to measure voltage
Used to measure current
Needs to be attached parallel to the component being measured.
Needs to be attached with the same wire the component being measured is connected to (series)
Which of the following is true about component Q?
Used to measure voltage
Used to measure current
Needs to be attached parallel to the component being measured.
Needs to be attached with the same wire the component being measured is connected to (series)
In a parallel circuit... (select all that apply)
The current splits and merges such that I = I1 = I2 = I3 = ...
the voltage is the same through all components
The current splits and merges such that I = I1 + I2 + ...
Total voltage = V1 + V2 + ...
R1=R11+R21+...
