WorksheetsALE_Review Building Technologies & Utilities
Total questions: 20
Worksheet time: 20mins
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Type of Joint
(a)
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Identify Type of Joint
(a)
Threaded metal pins or rod with one end having the head and with the external thread on the other end that accepts a mating nut (a metal block with a central threaded hole to receive a bolt or other threaded material) and is used for holding it together or securing different members or material after being inserted through holes.
Rivets
Screw
Bolts
Teckscrew
The tagalog equivalent of "Earthfill" is;
Estaka
Larga Masa
Banda y banda
Escombro
Truck-mixed concrete governed by ASTM C94 is delivered to a job site for use in a reinforced concrete slab. The concrete should be delivered and discharged within what time limit after the introduction of water.
30 minutes
60 minutes
90 minutes
120 minutes
Which of the following is the "least" desirable sealant for metal curtain-wall construction.
Non-skinning compounds (polybutenes)
Oil-based compounds (Caulking)
Rubber-based compounds (Polysulfides)
Elastic compounds (Butyls, Acrylics & Vinyls)
What is the maximum time period that mixed mortar can be used before hydration has a damaging effects on its final strength.
2 - 3/2 hrs.
1/2 - 1-1/2 hrs.
3-1/2 - 4 1/2 hrs.
4 1/2 - 6 hrs.
In a steel-framed structure, which of the following does NOT generally provide for required lateral force resistance.
Steel Bracing
Rigid Frame
Pile Caps
Shear Walls
Edges of fire-resistant, interior-finish gypsum wallboard are?
Tapered
Beveled
Squared
Tongue & Groove
Which of the following is an advantage of post-tensioned concrete over pre-tensioned and pre-cast concrete?
Quality can be verified before installation
Heavy abutments are not required
Construction time may be reduced
Cured section can be sawed to desire lengths
Which of the following factory finish treatments is commonly specified for aluminum storefront sections?
Bonderizing
Metalizing
Anodizing
Aluminizing
What do you call the appearance of waterborne salts on the face of masonry?
Laitance
Effluence
Efflorescense
Permeance
