NEW
Font size
WorksheetsBS7671 QUIZZ 001
Total questions: 22
Worksheet time: 11mins
BS 7671 includes requirements for:
lift installation covered by BS 5655
equipment for aircraft
equipment of fixed offshore installations
alterations and additions.
The IEE Regulations provide
instructions for every circumstance.
safety especially from fire, shock and burns
a detailed specification
instructions for untrained persons
Which one of the following electrical installations is NOT covered by BS 7671?
Construction sites
Lightning protection of buildings to BS EN 62305.
Prefabricated buildings
Public premises
The IEE Regulations are non-statutory but, if they are adhered too, compliance with which one of the following statutory regulations is most likely?
Electricity Safety, Quality and Continuity Regulations 2002
Cinematograph Regulations 1955
Electricity at Work Regulations 1989
The Health and Safety at Work Act 1974.
Which of the following electrical installations IS covered by the IEE Regulations?
Exhibitions, shows and stands.
Explosive atmospheres
Emergency lighting
Mines and Quarries
The IEE Regulations state requirements intended to provide
the most economical design
instructions for lightning protection of buildings
safety of persons
detailed instructions for all circumstances.
The IEE Regulations recognises that in electrical installations there is a risk of injury from
shock currents
dangerous chemicals
asbestos.
high winds
When choosing the type of wiring system for an installation consideration should be given to
accessibility of wiring to persons and livestock.
the maximum volt drop
the experience of the installing electrician
the materials available on site
BS 7671 requires that
the installation main switch switches the line conductor only
there must be an effective means of cutting off all voltages of every installation
all installations have a main switch.
the main switch must have BS 88 fuses
BS 7671 requires that the person carrying out inspection and testing shall
have a copy of BS 7671.
complete a periodic test report
be skilled to carry out the testing
have at least three years experience
What is the primary purpose of BS 7671 in electrical installations?
To ensure the safety of persons and livestock from electrical hazards.
To provide a detailed specification for every possible circumstance.
To provide instructions for untrained persons.
To ensure the most economical design of electrical installations.
Which of the following is NOT a requirement of BS 7671?
The installation main switch switches the line conductor only.
There must be an effective means of cutting off all voltages of every installation.
All installations have a main switch.
The main switch must have BS 88 fuses.
What is the risk in electrical installations as recognized by the IEE Regulations?
Risk of injury from dangerous chemicals.
Risk of injury from asbestos.
Risk of injury from high winds.
Risk of injury from shock currents.
What is the main purpose of the IEE Regulations in electrical installations?
To provide a detailed specification for every possible circumstance.
To ensure the safety of persons and livestock from electrical hazards.
To provide instructions for untrained persons.
To ensure the most economical design of electrical installations.
Which of the following is a requirement of BS 7671 for electrical installations?
The main switch must have BS 88 fuses.
All installations have a main switch.
The installation main switch switches the line conductor only.
There must be an effective means of cutting off all voltages of every installation.
According to the IEE Regulations, what is the recognized risk in electrical installations?
Risk of injury from dangerous chemicals.
Risk of injury from asbestos.
Risk of injury from high winds.
Risk of injury from shock currents.
What is the main objective of BS 7671 in electrical installations?
To provide a detailed specification for every possible circumstance.
To ensure the safety of persons and livestock from electrical hazards.
To provide instructions for untrained persons.
To ensure the most economical design of electrical installations.
According to BS 7671, which of the following is NOT a requirement for electrical installations?
The main switch must have BS 88 fuses.
All installations have a main switch.
The installation main switch switches the line conductor only.
There must be an effective means of cutting off all voltages of every installation.
What is the recognized risk in electrical installations according to the IEE Regulations?
Risk of injury from dangerous chemicals.
Risk of injury from asbestos.
Risk of injury from high winds.
Risk of injury from shock currents.
What is the main risk associated with electrical installations as per the IEE Regulations?
Risk of injury from falling objects.
Risk of injury from shock currents.
Risk of injury from fire.
Risk of injury from water leakage.
What is the primary requirement of BS 7671 for electrical installations?
All installations must have a backup generator.
There must be an effective means of cutting off all voltages of every installation.
The main switch must be located near the entrance.
All installations must have a fire extinguisher nearby.
According to the IEE Regulations, what is the main purpose of the regulations in electrical installations?
To ensure the most economical design of electrical installations.
To provide instructions for untrained persons.
To ensure the safety of persons and livestock from electrical hazards.
To provide a detailed specification for every possible circumstance.
