WorksheetsForklift Certification Practice Test (Feb.16)
Total questions: 27
Worksheet time: 1hrs 16mins
Name
Class
Date
1.
Your Name
4 lines
2.
Your ID No.
4 lines
3.
Where can the stacker operators quickly obtain the information needed to perform basic maintenance and inspections?
a)
operation and maintenance manual
b)
repair manual
c)
parts manual
d)
material manual
4.
What is used to measure voltage?
a)
Wattmeter
b)
Ammeter
c)
Ohmmeter
d)
Voltmeter
5.
When the stacker is working on a sloping ground, such as the inclination is within three degrees, how many meters should the shuttle lift not exceed?
a)
1 meter
b)
1.5 meters
c)
2 meters
d)
2.5 meters
6.
Which of the following belongs to the stacker driving device?
a)
bracket
b)
brake pedal
c)
wheels
d)
torque converter
7.
Which of the following is not the focus of tire inspection?
a)
air pressure
b)
width
c)
embedding of foreign objects such as sandstone
d)
abrasion
8.
What should be paid attention to when the stacker fork lifts the boxes?
a)
length
b)
width
c)
volume
d)
center of gravity
9.
After the stacker engine is started, the oil warning light does not go out. What is the possible reason for the oil?
a)
the temperature overheats
b)
the amount is too large
c)
the amount is too small
d)
the temperature is too low
10.
What is the main function of the stacker?
a)
forward tilt
b)
hypsokinesis
c)
manned
d)
handling and carrying.
11.
Which most commonly used command method must stacker operation and command personnel be familiar with?
a)
watchword
b)
gesture
c)
banner
d)
whistle
12.
What is the name of an engine that produces two rotations of the crankshaft from the four strokes of intake, compression, power, and exhaust?
a)
one-stroke engine
b)
two-stroke engine
c)
three-stroke engine
d)
four-stroke engine
13.
What is the hazard factor that will make the human body lose its effect?
a)
physical
b)
chemical
c)
biological
d)
ergonomics
14.
What does "▽" in the industrial safety label mean?
a)
prohibition
b)
general description or tips
c)
attention
d)
warning
15.
Which of the following is not the main disaster type of stacker operation?
a)
hit by a stacker
b)
material collapse
c)
drive slowly at low speed
d)
the stacker overturns
16.
What is the state of lubricating oil (motor oil) when it seeps?
a)
transparent
b)
gelatinous
c)
emulsified
d)
solidified
17.
When pushing objects on the inclined plane, what happens when the slope is smaller?
a)
more effort-saving
b)
more laborious
c)
not effort-saving
d)
it depends
18.
The stacker must turn right in reverse mode. In which direction should the steering wheel rotate?
a)
clockwise
b)
counterclockwise
c)
do not move
d)
it must be determined by the steering position of the rear wheels
19.
If the driver operates the stacker vertically, more than how many meters should be the distance from the bottom of the driver's seat to the lower end of the upper frame of the head living?
a)
1.2
b)
1.4
c)
1.6
d)
1.8
20.
What should you do to keep the stacker in the straight direction?
a)
control the steering wheel with the right hand
b)
hold the steering wheel tight with both hands
c)
hold the knob on the steering wheel with your left hand
d)
ask someone to help hold it tight
21.
Which of the following is not a labor statutory obligation stipulated in the Occupational Safety and Health Act?
a)
receive regular health checkups
b)
participate in safety and health education and training
c)
implement automatic check
d)
comply with safety and health work rules
22.
A sharp turn of the stacker is likely to cause overturning accidents. What is the main cause?
a)
gravity
b)
centrifugal force
c)
static friction
d)
dynamic friction
23.
Which of the following disasters can be avoided if the employer requires that control personnel not enter beneath the lifting objects?
a)
induction
b)
falling
c)
objects flying down
d)
hypoxia
24.
How many kilograms or more of the material to be handled should machinery and tools be used instead of manpower as much as possible?
a)
35kg
b)
40kg
c)
45kg
d)
50kg
25.
Which of the following is not included in the "self-inspections" according to the provisions of the Occupational Safety and Health Management Regulations?
a)
regular inspection of machinery
b)
key inspection of machinery and equipment
c)
operation inspection of machinery and equipment
d)
health examinations for workers.
26.
What is the radius of gyration of the stacker?
a)
when the car turns with a small radius
b)
when the car turns with a large radius
c)
the radius traveled by the outer rear wheel
d)
the radius traveled by the inner rear wheel
27.
If there are two oil temperature gauges on the instrument panel of the stacker, where do they indicate the oil temperature?
a)
diesel oil and hydraulic oil
b)
brake oil and consistent grease
c)
engine oil and differential oil
d)
engine oil and brake oil.
100 %
