NEW
Font size
S
M
L
XL
WorksheetsBasic construction drawing practice quiz
Total questions: 21
Worksheet time: 5hrs 3mins
Name
Class
Date
1.
This type of drawing would be referred to as an ________________________ drawing.
a)
Side profile
b)
Elevation
c)
Foundation plan
d)
Floor plan
2.
This type of drawing would be an example of a ______________________ .
a)
CAD drawing
b)
Spec sheet
c)
Blueprint
d)
Floor plan
3.
This type of drawing would be an example of a _________________________ .
a)
Blueprint
b)
CAD drawing
c)
Elevation drawing
d)
Topographic map
4.
This type of drawing would represent a ______________________ .
a)
Floor plan
b)
Sectional drawing
c)
Roof plan
d)
Foundation plan
5.
The right lower corner that is highlighted in green represents the ________________ .
a)
Specifications
b)
Fire protection plan
c)
Title Block
d)
Materials list
6.
What does this symbol represent ?
a)
North star
b)
Nearest reference point
c)
North direction
d)
No clue
7.
What type of drawings are the most common found in today's construction projects in the field ?
a)
Blueprints
b)
CAD
c)
3 D dimensional
d)
Clay models
8.
The ______________________ shows the lowest level of the building including the concrete footings, slabs, and foundation walls.
a)
Floor plan
b)
Roof plan
c)
Foundation plan
d)
Fire protection plan
9.
The __________________ contains the following : company logo, sheet title, the date, initials of person to draft drawing, and drawing number code for project.
a)
Isometric drawing
b)
Detail drawing
c)
Section drawing
d)
Title block
10.
A ________________ is a combination of disconnect switches, fuses or circuit breakers used to control protect and isolate electrical equipment.
a)
Electrical service
b)
Master controls
c)
Capacitor
d)
Switchgear
11.
Plans used for work that has to do with construction in or on the earth are called _____.
a)
civil plans
b)
architectural renderings
c)
structural foundations
d)
exterior views
12.
The clear area one half inch around the edge of a drawing would be called a __________ ?
a)
Edge spacing
b)
Note area
c)
Border
d)
Sill area
13.
A revision block is located where on a construction drawing ?
a)
Lower left corner
b)
Upper left corner
c)
Above the title block
d)
Middle of the drawing
14.
A ___________ is used to identify lines and other symbols.
a)
Answer key
b)
Key
c)
Decoder block
d)
Legend
15.
A metric scale is a straightedge measuring device that has ______________________ .
a)
Millimeters divided into 10 centimeters
b)
Centimeters divided into 10 millimeters
c)
Millimeters divided into 12 centimeters
d)
Centimeters divided into 12 millimeters
16.
Engineers scale is a straightedge measuring device that _________________________ ?
a)
Measures in inches divided into 12ths
b)
Measures in inches divided into 10 ths
c)
Measures in inches divided into 32nds
d)
Measures in inches divided into 64ths
17.
A(n) _____________________ is a person who applies scientific principals in design and construction.
a)
Architect
b)
CAD designer
c)
Operating engineer
d)
Engineer
18.
A(n) ________________ is a person who is qualified, licensed person who creates and designs drawings for a construction project.
a)
Engineer
b)
CAD designer
c)
Architect
d)
Civil Engineer
19.
____________________ identify part of a structure that is not visible on a drawing.
a)
Hidden lines
b)
Leader lines
c)
Dimension lines
d)
Focus lines
20.
A ___________________________ Is a one line drawing that showing the path for electrical circuitry or the relationship of all parts in a system.
a)
Flow chart
b)
Graph chart
c)
Schematic
d)
Legend
21.
The term HVAC stands for ?
a)
High Volume Air conditioning
b)
High Ventilation Alternating Current
c)
Heating Ventilation Air Conditioning
d)
Heating Ventilation Air Compressor
Reset
