NEW
Font size
WorksheetsTACN -ĐĐT - GRAMMAR - TRANSLATION
Total questions: 18
Worksheet time: 14mins
Biến trở giới hạn dòng điện chạy trong mạch điện.
The rheostat interrupts the current flow in the circuit.
The rheostat limits the current flow in the circuit.
The rheostat processes the current flow in the circuit.
The rheostat controls the current flow in the circuit
Khung kim loại của nhiều thiết bị điện được dùng để dẫn dòng điện.
The metal frames of many electrical devices are used to conduct current.
The sources of many electrical devices are used to conduct current.
The controls of many electrical devices arc used to conduct current.
When the infrared signals change rapidly, the output indicates motion.
Khi tín hiệu hồng ngoại thay đổi nhanh, đầu ra chỉ ra được sự chuyển động.
When the infrared signals change rapidly, the output indicates motion.
The controls of many electrical devices arc used to conduct current.
When the infrared signals change rapidly, the iutput indicates motion.
The output interface changes current signal, analog voltages into simple voltage levels.
Giao diện đầu vào chuyển đổi tín hiệu điện, điện áp tương tự thành mức điện áp đơn giản.
The output interface changes current signal, analog voltages into simple voltage levels.
The input interface supplies current signal, analog voltages into simple voltage levels.
The input interface changes current signal, analog voltages into simple voltage levels.
Sensors that measure very small changes must have very low sensitivities.
Với bộ khuếch đại điện áp, dòng điện đầu vào nhỏ có thể được khuếch đại 100 lần so với ban đầu.
. PIR sensors arc used to sense and indicate motions.
With curcnt amplifier, a small input voltage might be amplified l 00 times as great as the input voltage.
The input interface changes current signal, analog voltages into simple voltage levels.
With voltage amplifier, a small input voltage might be amplified I 00 times as great as the input voltage.
Chức năng chính của giao diện đầu vào là nhận và chuyển đổi tín hiệu trường điện từ thành dạng tín hiệu được xử lý bởi CPU.
Sensors that measure very small changes must have very high sensitivities.
The principal function of the input interface is to receive and convert field signals into a form that can be used by the CPU.
The principal function of the output interface is to receive and convert field signals into a form that can be used by the CPU.
The controls of many electrical devices are used to conduct current.
Cảm biến hồng ngoại được sử dụng trong hệ thống báo động hoặc hệ thống chiếu sáng tự động.
An on-board amplifier of sensors mounted on a printed cuicuit board, which focuses the infrared signals.
PIR sensors are used in alarm systems or automatically-activated lighting systems.
PIR sensors arc used to sense and indicate motions.
The output interface changes current signal, analog voltages into simple voltage levels.
IC CMOS có các tranzito tín hiệu trường và chúng được sử dụng cho máy tính xách tay chạy bằng pin.
CMOS ICs contain field effect transistors and they are better for battery-powered portable computers.
The number of possible inputs in PLCs is usually limited by the CPU and size of memory.
. Programming devices allow users to enter instructions into memory in the form of a program.
Current moves from a point of high potential energy to point of low potential.
PLC là thiết bị có khả năng được lập trình để thực hiện chức năng điều khiển.
PIR sensors arc used in alarm systems or automatically-activated lighting systems.
CMOS ICs contain field effect transistors and they are better for battery-powered portable computers.
PLC is a device which capable of being programmed to perform a controlling function.
Sensors that measure very small changes must have very low sensitivities.
Thiết bị lập trình cho phép người sử dụng nhập câu lệnh vào bộ nhớ dưới dạng chương trình.
Programming devices allow the engineers to enter and edit the program to be executed
Programming devices allow users to enter instructions in to memory in the l'orm of a program.
PLC is a device which capable of being programmed to perform a controliing function.
The number of possible inputs in PLCs is usually limited by the CPU and size of memory.
You should wear protective clothing in the workshop. (passive voice)
Protective clothing should be wear in the workshop.
Protective clothing should been worn in the workshop.
Protective clothing should be worn in the workshop.
Protective clothing should worn in the workshop
The users enter instructions into memory of PLCs. (passive voice)
Instructions is entered into memory of PLCs by the users.
lnstructions has entered into memory of PLCs by the users.
Instructions arc entered into memory of PLCs by the users.
Instructions has been entered into memory of PLCs by the users.
The plastic window protects the sensor's view. (passive voice)
The sensor's view was protected by the plastic window.
The sensor's view has been protect by the plastic window.
The sensor's view has protected by the plastic window.
The electric battery was invented by Luigi Galvani in 1786.
Scientists classify mercury as a metal. (passive voice)
Mecury is classified as metal by scientists.
Mecury are classify as metal by scientists.
Mecury was classified as metal by scientists.
Mecury were classify as metal by scientists.
A heat-sink is a device. The heat-sink is used to release heat. (which)
A heat-sink is a device which the heat-sink is used to release heat.
A heat-sink which is a device, the heat-sink is used to release heat.
A heat-sink is a device which is used to release heat.
A heat-sink is a device which using to release heat.
Integrated circuits are being developed. They have been greatly reduced in size. (which)
Integrated circuits which have been greatly reduced in size are being developed.
Integrated circuits who have been greatly reduced in size are being developed.
Integrated circuits whose have been greatly reduced in size are being developed.
Integrated circuits what have been greatly reduced in size are being developed.
The program is written by the user. The program is stored in PLC’s memory. (which)
The program who is stored in PLC’s memory is written by the user.
The program which is stored in PLC’s memory is written by the user.
The program who stored in PLC’s memory is written by the user.
The program which stored in PLC’s memory is written by the user.
The source can be any device. This device supplies electrical energy. (which)
The source can be any device which to supply electrical energy.
The source can be any device which supplying electrical energy.
The source can be any device which are supplied electrical energy.
The source can be any device which supplies electrical energy.
