A ___ is anchored to an adjacent fillister head screw.

May come apart due to vibration which may lead to cable circuits being open.

The safety wire should be as ___ as practicable and must be installed in the direction which tightens the nut on the plug.

Turnbuckles that is "satisfactory"

Turnbuckles that is "preferred"

A fastener that can turn in the body in which it is mounted but will not drop out when unscrewed from the part it is holding.

Permits quick and easy removal of access panels for inspection and servicing purposes.

Features a stud with a groove or slot that’s connected to a spring-loaded mechanism. As you turn the stud it will engage the groove or slot.

A high-strength, quick-release rotary fastener that may be used on flat or curved inside and outside panels.

Fabricated from high-carbon,

heat treated steel heat-treated

The Dzus ___ are fabricated from steel and are cadmium plated.

The Dzus ___ is made of

aluminum or aluminum alloy

material.

The Dzus ___ is made of steel,

cadmium plated to prevent corrosion.

secure the hub and the shaft to prevent relative movement between a power transmitting shaft and an

either round or flat in cross-section which is tempered to have springlike action.

Aircraft rivet type that is driven using a bucking bar

Aircraft rivet type that areas where using the bucking bar is not permissible.

Marking on the ___ of the rivets are used to classify their characteristics.

These are used in the interior of the aircraft except where clearance is required for adjacent members.

These are used on interior structures.

Has a head of large diameter good for riveting thin sheet stock (skin).

A combination of the roundhead, flathead, and brazier head.

A flat-topped and beveled toward the shank to fit in the countersunk or dimpled hole.

These rivets are usually used for repair work and widely used fastening devices for sheet metal aircraft

construction.

Used where access to both sides for riveting is impossible.

large blind side bearing surface, developed during the installation process.

Has a positive mechanical locking collar to resist

vibrations that cause the friction lock rivets to loosen and possibly fall out.

Provides excellent sheet take-up and hole-filling performance.

Requires both sides to be accessible when installing.

The strongest special fasteners used in aircraft construction.

Contains a bead that encircles the bottom of its shank.

Similar in appearance and application to a Rivnut but they require more clearance on the blind side to accommodate the barrel.

High strength blind rivet used on late-model aircraft. High- strength.

used extensively in aviation fluid applications.

used for general-purpose lines of low or negligible fluid pressures, such as instrument lines and ventilating conduits.

used for general-purpose lines of low or negligible fluid pressures, such as instrument lines and ventilating conduits.

used extensively in high-pressure hydraulic systems (3 000 psi or more) EX. landing gear, flaps, brakes, and in fire zones.

This type of tubing and fitting is used extensively in the transport category and high-performance aircraft hydraulic systems for pressures above 1 500 psi.

are colored black.

are colored blue.

are cadmium-plated and natural in appearance.

male thread

Machine threads have no ___ capability and are similar to those used on common nuts and bolts.

Machine threads have no ___ and will not form a fluid-tight seal.

___ fittings are designed primarily for high pressure (3,000 psi) hydraulic systems that may be subjected to severe vibration or fluctuating pressure.

create a permanent connection that is virtually maintenance free.

are standard fittings with a shape memory alloy, Tinel, The sleeve is manufactured 3 percent smaller, frozen in liquid nitrogen, and expanded to 5 percent larger than the line.

is used in aircraft fluid systems to connect moving parts with stationary parts in locations subject to vibration or where a great amount of flexibility is needed.

is never used in the construction of flexible fluid lines.

is a synthetic rubber compound that has excellent resistance to petroleum products.

is a synthetic rubber compound with an acetylene base. Not as good as Buna-N but has better abrasive resistance

is a synthetic rubber compound made from petroleum raw materials. It is an excellent material to use with phosphate ester base hydraulic fluid (Skydrol).

Lines conveying fuel

lines containing toxic materials

Lines containing physically dangerous materials, such as oxygen, nitrogen, or Freon.

are generally placed on both ends of a line and at least once in each compartment through which the line runs.

are placed immediately adjacent to each valve, regulator, filter, or other accessory within a line.

are used, location requirements are the same as for tapes and decals.