wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

Midterm Examination-Advacomt (I-AINS) Asuncion

Total questions: 50

Worksheet time: 17mins

Name
Class
Date
1.

What is the term used to describe the process of identifying and resolving computer issues through deductive reasoning methods?

a)

STATIC FAILURE

b)

FAILURE

c)

TROUBLESHOOTING

d)

DYNAMIC FAILURE

2.

Which component of a computer system is responsible for storing BIOS settings?

a)

BIOS

b)

Real Time Clock (RTC)

c)

SOUTH BRIDGE

d)

CMOS

3.

What type of troubleshooting involves the use of flow charts and replacing all suspected components?

a)

CLASSICAL TROUBLESHOOTING

b)

BASIC TROUBLESHOOTING

c)

TROUBLESHOOTING

d)

BRUTE FORCE TROUBLESHOOTING

4.

 Which instrument is commonly used to measure resistance?

a)

VOM

b)

Multimeter

c)

Volt-Ohm-MilliAmmeter

d)

Ohmmeter

5.

In safety precaution, do not remove video card from a computer when it is turned on, unless it is..

a)

USB type

b)

under troubleshooting

c)

hot-swappable

d)

Already damage

6.

What color gives 3.3V in the 20 or 24 pins power supply connector to the motherboard?

a)

Black

b)

Blue

c)

ORANGE

d)

YELLOW

7.

It is the standards that describe the size, shape, and major features of these components of the computer system so that they work together.

a)

Form factor

b)

Motherboard

c)

Full tower system case

d)

Expansion slots

8.

When did AMD releases their first Hexa-core processor?

a)

2018

b)

2017

c)

2015

d)

2010

9.

Type of troubleshooting by means of localizing and isolating computer failure.  

a)

CLASSICAL TROUBLESHOOTING

b)

BASIC TROUBLESHOOTING

c)

TROUBLESHOOTING

d)

BRUTE FORCE TROUBLESHOOTING

10.

What do we need to do if we see "Non-serviceable components inside"

a)

Open it and conduct troubleshooting

b)

Do not touch it and consult the service center or replace it with a new one if necessary.

c)

Apply all possible steps in computer trouble shooting and repair, and do trial and error until it is sucessfully done.

d)

Seek advise from your classmates

11.

Fill in the blank: P1 24-pin power connector follows ATX ______ and higher standards.

a)

Version 3.0

b)

Version 3.2

c)

Version 2.2

d)

Version 4.0

12.

It is the most commonly used form factor today. It is an open, nonproprietary industry specification originally developed by Intel in 1995.

a)

Micro-ATX

b)

ATX

c)

Mini-ATX

d)

FlexATX

13.

One long and three short beeps indicates of what error in the computer?

a)

MEMORY

b)

VIDEO CARD

c)

BIOS

d)

HARD DISK

14.

Any physical condition that causes an incorrect output when a circuit is exercised to perform a function.  

a)

STATIC FAILURE

b)

DYNAMIC FAILURE

c)

OPEN CIRCUIT

d)

FAILURE

15.

In digital circuitry, likelihood of multiple simultaneous failures is low. Usually, a single chip malfunctions causing one or more symptoms. However, if you’ve shorted something in the circuitry, all bets are off, so what should you do? 

a)

Assume One Problem

b)

Don’t Panic !

c)

Use Your Senses

d)

Observe the Condition

16.

In ATX 20 pins power supply connector to the mtherboard, what pin carry the power on signal?

a)

PIN No. 14

b)

PIN No. 12

c)

PIN No. 16

d)

PIN No. 17

17.

In digital circuitry, likelihood of multiple simultaneous failures is low. Usually, a single chip malfunctions causing one or more symptoms. However, if you’ve shorted something in the circuitry, all bets are off, so what should you do? 

a)

Assume One Problem

b)

Don’t Panic !

c)

Use Your Senses

d)

Observe the Condition

18.

If the problems already determined, try not to work with the other working parts of the system, it only time consuming and may cause another trouble.  

a)

Isolate to a Failed Parts.

b)

Localize to a Stage

c)

Use Proper Tools and Equipment

d)

Observe the Condition

19.

Going after the failure in electronic circuitry when you are inadequately prepared materials is like tracking a rabbit through your carrot garden with your eyes blindfolded. What its implies?

a)

Isolate to a Failed Parts.

b)

Localize to a Stage

c)

Use Proper Tools and Equipment

d)

Observe the Condition

20.

It is a device used to discharge statis electricity from our bady

a)

Anti-static wrist strap

b)

Static discharge

c)

Metal case

d)

Grouding

21.

On the video presentation it was discuss that PGS has ___ tolerance of positive voltage.

a)

5% tolerance

b)

20% tolerance

c)

10% tolerance

d)

15% tolerance

22.

what is the type of  motherboard with an LGA 775  socket that supports an Intel processor?

a)

ATX

b)

Mini-ATX

c)

BTX

d)

Micro-ATX

23.

It includes stock-up problems associated with shorted or open circuitry.  

a)

STATIC FAILURE

b)

FAILURE

c)

DYNAMIC FAILURE

d)

OPEN CIRCUIT

24.

What is a  is an onboard, battery-powered semiconductor chip inside computers that stores information and this information ranges from the system time and date to your computer's hardware settings and password?

a)

System Timer battery

b)

Energizer

c)

BIOS

d)

CMOS Battery

25.

What is a hardware device that converts AC electricity into DC electricity and then distributes it to the rest of the computer?

a)

Power supply Unit

b)

Computer memory

c)

Hard Disk

d)

Motherboard

26.

   These are characterized by a lack of electrical conduction when it should be present.

a)

STATIC FAILURE

b)

FAILURE

c)

DYNAMIC FAILURE

d)

OPEN CIRCUIT

27.

What is the dimension of full size ATX motherboard?

a)

9.6" X 7.5"

b)

12.0" X 13.8"

c)

12.0" X 9.6"

d)

9.6" X 12.6"

28.

What is thet ype of motherboard where the CPU sits opposite the expansion slots and does not block the room needed for long expansion cards?

a)

ATX

b)

Mini-ATX

c)

BTX

d)

Micro-ATX

29.

Try to test each components one after another until you isolate the problems. If you disconnected all the peripherals and tested the component alone and it will don’t work try to determine what section or division of the machine failed. What you should considered?  

a)

Assume One Problem

b)

Use Proper Tools and Equipment

c)

Observe the Condition

d)

Diagnose to a Section

30.

Try to test each components one after another until you isolate the problems. If you disconnected all the peripherals and tested the component alone and it will don’t work try to determine what section or division of the machine failed. What you should considered?  

a)

Localize to a Stage

b)

Assume One Problem

c)

Observe the Condition

d)

Diagnose to a Section

31.

In safety precaution, what type of electricity that must be discharge from our body before handling sensitive components?

a)

Static Electricity

b)

DC Electricity

c)

AC Electricity

d)

Charged Electricity

32.

Restart the system and be sure that problem is properly solved. If not review the process and reapply necessary procedures.    

a)

Assume One Problem

b)

Use Proper Tools and Equipment

c)

Test and Verify Proper Operation

d)

Diagnose to a Section

33.

   What is the codename of Intel Core i7-5960X processor Extreme Edition?  

a)

Haswell-E

b)

Daytona-D

c)

Ridgwaood-C

d)

Sta. Fe FX

34.

It includes the time dependent errors, such as the loss of signals quality, which causes a circuit output to reach steady state too late to be properly used by another part of the system.   

a)

SHORT CIRCUIT

b)

DYNAMIC FAILURE

c)

STATIC FAILURE

d)

FAILURE

35.

   It is the component that supplies power to the other components in a computer, more specifically it is typically designed to convert general-purpose alternating current (AC) to direct current (DC)  

a)

Chassis

b)

Motherboard

c)

System Case

d)

Power Supply Unit

36.

 What do Mini-ITX, MicroATX and ATX Motherboards Have in Common?

a)

Their back panel ports are similar.

b)

They run the same RAM Memory

c)

They are compatible to all form factors

d)

They can support the different GPU

37.

Which of the given list is a built-In ports usually found on ATX Motherboards?

a)

2-pins LAN ports

b)

HDMI ports

c)

USB 2.0 or 3.0 ports

d)

wi-fi ports

38.

What CPU socket type that the Intel DX58SO motherboard has?

a)

LGA 1266

b)

LGA 1055

c)

LGA 1388

d)

LGA 1366

39.

What are the two examples of Hexa-core processor developed by Intel and AMD?

a)

AMD Ryzen 6 2600X and Core i5 580X

b)

AMD Ryzen 9 9600X and Core i9 1380X

c)

AMD Ryzen 5 2600X and Core i7 980X

d)

AMD Ryzen 7 7600X and Core i7 780X

40.

What companies released the first dual core proceesor on 2004?

a)

AMD and Intel

b)

Sun and HP

c)

Qualcom and Helio

d)

i5 and i7 company

41.

What is a type of fire  extinguisher that design for burning electrical equipment?

a)

Type C

b)

Type B

c)

Type A

d)

Type K

42.

What is the size of 3rd generation quad core Intel processor?

a)

22 nm

b)

17nm

c)

7nm

d)

10nm

43.

  It describe as electrical conduction in a wrong place, usually may cause by a mechanical failure in a device or in a solder bridge.  

a)

SHORT CIRCUIT

b)

DYNAMIC FAILURE

c)

STATIC FAILURE

d)

FAILURE

44.

It is the central printed circuit board (PCB) in many modern computers and holds many of the crucial components of the system, while providing connectors for other peripherals of thecomputer system.  

a)

Power Supply Uint

b)

Motherboard

c)

System Case

d)

Compute Memory

45.

What is a windows CLI command used to check hard disk for error?

a)

CHKDSK

b)

MEMTEST86

c)

SYSTEM SCAN

d)

FORMAT EXE

46.

What is the amount of current that can give you  extreme pain; possible severe muscle reactions; possible respiratory arrest; possible death

a)

50,000 UA

b)

1 to 5 mA

c)

6 to 30 mA

d)

50 to 150 mA

47.

What do we need to do before removing any parts of the computer system?

a)

Unplug the unit from the main source

b)

wear ESD

c)

ground your self

d)

Select proper Tools

48.

Inpower supply configuration, what is the color of wire carries PS_ON?

a)

Gray

b)

Blue

c)

Orange

d)

Green

49.

What is a type of fire  extinguisher that design for burning electrical equipment?

a)

Type C

b)

Type B

c)

Type A

d)

Type K

50.

It is defined as being a system, which has more than two CPUs working together on the same chip. A multicore system is also a type of architecture, which has a single physical processor that contains the logic of two or more processors, which are packed together in a single integrated circuit.   

a)

Dual core CPU

b)

Virtualization

c)

Multicore System

d)

Hyper threading technology