WorksheetsDDP Review Questions
Total questions: 20
Worksheet time: 24mins
What is the measurement at the arrow mark?
3 1/8"
3 3/8"
3 3/16"
3 1/4"
What is the measurement at the arrow mark?
3 7/8 in.
3 15/16 in.
3 3/4 in.
4"
What is the measurement at the arrow mark?
4 3/4 in.
4 7/8 in.
4 15/16 in.
5 in.
Sketch in which vanishing points are used to provide the depth and distortion that is seen with the human eye.
Perspective Sketch
Isometric Sketch
Sketch
Multiview Sketch
A point in space, usually located on the horizon, where parallel edges of an object appear to converge.
Vanishing Point
Convergent Point
Parallel Point
Harizon Point
Lightly drawn lines to guide drawing other lines and shapes.
Construction Lines
Light Lines
Guiding Lines
Sketch
A heavy solid line used on a drawing to represent the outline of an object.
Dark Line
Object Line
Outline
Sketch Line
Very lightly drawn lines to guide drawing other lines and shapes
Hidden Line
Construction Line
Section Line
Short-Break Line
Black Wires are considered to be
Negative
Ground
Neutral
Hot
When stripping insulation off of individual conductor it should be ________to_________
1/4' to 5/16"
1/2" to 1"
5/8" to 3/4"
1/8" to 1/4"
White wires are __________________ .
Ground
Hot
Neutral
Positive
Bare copper wires are __________________ .
Ground
Hot
Neutral
Positive
What gauge of wire is typically used for 15 amp circuits?
10 ga
12 ga
14 ga
16 ga
What do we call romex cable that has 2 14 gauge conductors and 1 ground wire?
14-2
14-3
What is current?
The flow of electrons (volume)
Electrical pressure (psi)
Opposition to the flow of electrons
What is isometric sketching?
Method of creating a 3D representation of an object on a 2D surface.
A process of creating a 2D sketch of an object from multiple perspectives.
A technique used to create 2D drawings of 3D objects.
A method of creating a 2D representation of an object on a 3D surface.
How does isometric sketching differ from perspective drawing?
Isometric sketching is done freehand, while perspective drawing requires the use of a ruler.
Isometric sketching uses parallel lines, while perspective drawing uses converging lines.
Isometric sketching is used for 2D drawings, while perspective drawing is used for 3D drawings.
Isometric sketching uses curved lines, while perspective drawing uses straight lines.
In using Onshape to make a PART, first, you Create -> Document, then choose Sketch, then what do you have to do?
Choose which plane (front, top or right) to draw
Extrude the 2d sketch to make a 3d part
Choose the size of your drawing
Set the Workspace units
