WorksheetsExam 1 BSE revision Quiz
Total questions: 87
Worksheet time: 44mins
What is the recommended Personal Protective Equipment (PPE) to protect the head from falling objects?
Safety helmet
Safety goggles
hard hat
safety visor
What minimum first aid provision is required for a small works project involving two or three people?
A fully equipped first aid kit
A basic first aid kit
an appointed person and information and procedures for workers
Access to a medical facility
A full-time medical practitioner on site
Which of the following is not a form of access equipment suitable for working at a height of 5 meters?
Ladder
Elevated boom and basket/ cage
A scissor lift platform
MEWPs
List one of the PESTEL factors used for analysis in building services and construction projects?
Political
Economic
Social
Technological
all of these
What does a public sector organization imply in the context of issuing tenders?
A government or state-owned entity
A privately-owned corporation
A non-profit organization
An international conglomerate
What is meant by 'retrofit BSE systems' in a retail sector facility?
Installing new branding
Upgrading existing building systems for energy efficiency
Expanding the retail space
Reducing the number of employees
What action should be taken with the delivery note when materials are delivered to a construction site?
It should be signed and stored for record keeping
It should be discarded immediately
It should be given to the construction workers
It should be ignored as it is not important
How are locally recycled bricks classified as sustainable in building construction?
They reduce transportation, waste, emissions, and use of natural resources
They are cheaper than new bricks
They are colored differently
They are less durable
What is one of the key requirements of the Waste Electrical and Electronic Equipment (WEEE) Regulations?
Proper disposal and recycling of electronic waste
Reduction in the use of natural resources
Increased use of electronic equipment
Mandatory use of biodegradable materials
What is one advantage of using a micro-wind turbine system for electrical supply in buildings?
It reduces reliance on fossil fuels
It is completely noise-free
It requires minimal maintenance
It is cheaper than solar panels
What is one disadvantage of using a micro-wind turbine system for electrical supply in buildings?
It can be visually unappealing
It produces constant electricity
It increases air pollution
It uses a lot of water
As a trainee, what is one of your responsibilities under RIDDOR if you witness an accident involving a colleague with long term injuries?
Provide first aid to the colleague
Report the accident to the relevant authorities
Take the colleague to the hospital
Ensure no one talks about the accident
What is the primary objective of conducting a feasibility study for a project?
To determine the project's profitability
To assess the practicality and potential success of the project
To finalize the project's budget
To hire project staff
What is the most appropriate method for attaching BSE accessories to plasterboard walls during a commercial property refurbishment?
Using standard nails
Applying strong adhesive glue
Utilizing specialized plasterboard fixings
Welding the accessories directly to the wall
What does a Grade I listing imply for a historical building undergoing refurbishment?
The building can be demolished and reconstructed.
No historical features may be altered.
Specific preservation measures are required for historical features.
Modern architectural styles must be incorporated.
Why is routine appliance testing important during the installation of BSE systems at a chemical plant?
To ensure compatibility with chemical substances
To comply with environmental standards
To ensure operational safety and functionality
To train the installation team
Which environmental standard is primarily concerned with the management of electronic waste?
ISO 14001
WEEE Directive
RoHS Compliance
LEED Certification
What is a key benefit of integrating Building Information Modeling (BIM) into construction projects?
Reduced legal liabilities
Improved communication and collaboration
Decreased use of digital tools
Increased construction time
What is the primary purpose of a snag list during the final stages of a construction project?
To list the workers' contact information
To document unfinished tasks and defects
To record the daily weather conditions
To calculate the total project cost
What is the primary purpose of conducting regular safety audits on a construction site?
To ensure compliance with health and safety regulations
To increase the speed of construction
To reduce the cost of materials
To enhance the aesthetic appeal of the site
Which type of fire extinguisher is most suitable for electrical fires in an office environment?
Water fire extinguisher
Foam fire extinguisher
Carbon dioxide fire extinguisher
Wet chemical fire extinguisher
What is a critical factor to consider when planning the logistics of a large-scale construction project?
The color scheme of the project
The personal preferences of the CEO
The location of the site and availability and location of the materials suppliers
The local sports team schedules
What is the primary reason for implementing regular tool maintenance checks on a construction site?
To ensure tools are functioning efficiently and safe to use.
To comply with manufacturer warranties
To increase the resale value of tools
To reduce the number of tools needed
What is the primary function of a risk assessment in construction management?
To determine the project's budget
To identify potential hazards and mitigate risks
To allocate office space for staff
To choose the construction materials
What is the main reason for implementing green building standards in construction?
To enhance the visual appeal of the building
To reduce the overall construction costs
To minimize environmental impact and increase sustainability
To speed up the construction process
What is the purpose of using a Gantt chart in project management?
To track project expenses
To list the project team members
To allow the efficient organising of trades and materials , and also, schedule and track the progress of the project
To communicate with stakeholders
What is the primary benefit of using prefabricated components in construction projects?
They allow for faster project completion
They require more skilled labor
They increase the project cost
They limit design options
Which type of contract is most commonly used for large-scale construction projects?
Fixed-price contract
Cost-plus contract
Time and materials contract
Unit pricing contract
What role does sustainability play in the selection of construction materials?
It is primarily about aesthetics
It focuses on reducing environmental impact
It is not considered important
It increases the overall project duration
What is the primary purpose of implementing energy-efficient lighting systems in commercial buildings?
To enhance the aesthetic appeal of the interiors
To reduce energy consumption and lower utility bills
To increase the heat generation within the building
To comply with the architectural design requirements
Which safety measure is essential when handling hazardous materials on a construction site?
Wearing decorative personal protective equipment
Using materials in well-ventilated areas
Storing materials in non-labeled containers
Ignoring spill procedures
What is a significant advantage of using modular construction techniques?
Increased construction complexity
Longer construction timelines
Reduced on-site construction time
Higher initial investment costs
What is the primary purpose of conducting regular safety audits on a construction site?
To ensure compliance with safety regulations
To provide entertainment for workers
To assess the aesthetic appeal of the site
To prepare for end-of-year celebrations
Which type of personal protective equipment (PPE) is essential for working with concrete?
Safety goggles
Decorative gloves
High-heeled shoes
Necktie
What is a key consideration when selecting a site for a new construction project?
Proximity to luxury shopping centers
Distance from the nearest coffee shop
Soil stability and suitability for building
Visibility from a famous landmark
What is the primary advantage of using green roofs in urban building design?
To increase the urban heat island effect
To provide additional living space
To reduce building energy consumption and manage stormwater
To simplify roof maintenance
What is the main purpose of conducting soil tests before starting a construction project?
To determine the type of crops that can be planted
To assess the suitability of the soil for building foundations
To check for the presence of archaeological artifacts
To evaluate the need for landscaping
Why is it important to adhere to building codes and regulations in construction?
To speed up the construction process
To reduce the cost of materials
To ensure safety, health, and welfare of the public
To limit the creativity of architects
What is the primary purpose of using energy-efficient appliances in sustainable building designs?
To increase the overall cost of the building
To reduce the environmental footprint by lowering energy consumption
To complicate the building maintenance process
To limit the use of modern technology
How does the use of local materials benefit a construction project?
It increases the transportation costs
It reduces the project's environmental impact by minimizing transportation emissions
It makes the construction process more complex
It requires more frequent material deliveries
What is the main advantage of implementing automated systems in building management (BMS)?
To reduce operational efficiency
To increase manual labor
To enhance building security and energy management
To complicate the user interface
The HASAWA covers...
All people at work (employers/ employees)
The self-employed
The general public
All of the above
How long does a person have to be off work due to an injury before the incident must be reported to RIDDOR?
More than 2 days
More than 3 days
More than 4 days
More than 5 days
Which of these is a method of onsite construction?
Prefabrication
CAD design
Brick & Block
Modular Construction
Running pipes and cables within walls and floor spaces to there required location is known as-
Substructure
1st Fix
2nd Fix
Superstructure
What type of foundation is most commonly used on domestic dwellings?
Strip
Pad
Raft
Pile
Flat roofs are normally pitched at around...
10 degrees
20 degrees
30 degrees
40 degrees
Ventilation systems are covered by which Building Regulations Approved Document?
Part A
Part F
Part L
Part M
Maintenance schedules would be found in the organization's...
O&M Manuals
M&M Manuals
P&M Manuals
O&O Manuals
Which level of BIM (Building Information Modelling) is mandatory on all public projects to embed more collaborative working practices in the industry?
BIM Level 0
BIM Level 1
BIM Level 2
BIM Level 3
"Those who are not directly involved in a project but who are affected by the project, such as local residents who may be adversely affected" best describes which type of project stakeholder?
In-Direct
Direct
Positive
Negative
The number of hours you are required to work per day/ week by your employer, would be found in a...
Employment contract
Manufacturer's instructions
Employment Act 2008
HASAWA 1974
If you were called to a small job that involved a lot of travel, you may decide that it's not worth your while. This would be calculated under...
Batch Costing
Activity-Based Costing
Life-Cycle Costing
Travel Costing
What is the SI unit for Temperature?
Metre
Second
Ampere
Kelvin
Litres would measure what?
Volume
Capacity
Length
Time
The amount of carbon produced in the manufacture of an appliance is known as its...
Carbon footprint
Overall carbon
Carbon measure
Embodied carbon
Which member of the construction industry visits workplaces to ensure that all necessary Building Regulation Approved Documents are being adhered to?
The Builder
The Building Control Officer
The HSE
The Site Manger
What percentage of the UK's total economic output comes from the construction industry?
16%
10%
8%
6%
Enhanced commuter travel, improved human networking and the economical movement of goods are all benefits of having a robust...
Construction industry
Communication system between trades
Infrastructure
Relationship with the client
What application can assist building companies in meeting the minimum requirements of full collaboration and transparency of BIM Level 2?
Smart Technology Appications
CAD
COBie
EPC
What is a schedule of works also known as?
GANTT Chart
CANT Chart
WONT Chart
MIGHT Chart
Which of these buildings is exempt from having to have an EPC?
Domestic property
Commercial property
Schools and Colleges
Religious buildings
Customer focus, Leadership, Engagement of people, Process approach, Improvement, Evidence-based decision making and Relationship management are all key areas of what?
ISO 8000
ISO 9000
ISO 7000
ISO 16000
Financial stability, Ethical Values, Care for Life and Collaborative Working are all examples of what?
Sustainable technologies
A bussiness' values
CSR
ISO 9000
The Finite Element Method uses computer software to break a material into separate nodes to better assess stress points and capabilities as a part of which process?
3D Prinitng
BIM
Structural Analysis
Building Management Systems
3D Printing is also know as what?
CAD
Additive Manufacturing
BIM
Industrial Construction
Computer modelling on flood protection has become prevalent due to what factor?
Climate change and rising sea levels
River laws in the UK post Brexit
A series of faults with Dams leading to flooding
Lack of workforce to operate dams due to the pandemic
What is the SI Unit for current?
S
M
K
A
A structurally sound building MUST have an acceleration, and therefore, a net force of...
Zero N
One N
Two N
Ten N
Work done=
Force x Time
Force x Weight
Force x Efficiency
Force x Distance
How many Joules would it take to move a 120 N weight a distance of 40 M?
3800j
4800j
3j
3500j
An appliance has an input of 19KW and an output of 15 KW. How efficient is this appliance?
78.9%
126%
75%
15.7%
Heat transfer due to a change in density of a fluid substance is known as what?
Conduction
Convection
Radiation
Evaporation
At what noise level does sound have the potential to damage peoples hearing?
60 db
70 db
80 db
90 db
Which Approved Document Building Regulation deals with the conservation of fuel and power?
Part M
Part P
Part G
Part L
Which initiative was set up to help reduce carbon emissions and create more sustainable homes?
CSR
BIM
Codes for Sustainable Homes (2006)
Building Regulations
Heritage buildings are listed as Grade 1, Grade 2 and Grade 2*. Which bracket is described here- buildings of exceptional interest, of the highest significance.
Grade 1
Grade 2
Grade 2*
Ask Alkan
What does the acronym BREEAM stand for?
Building Research Establishment Environmental Assessment Method
Building Research Eco Environmental Assessment Method
Building Research Establishment Environmental Achievability Method
Building Research Establishment Environmental Assessment Management
What percentage of materials delivered to site end up in landfill without ever being used?
13%
23%
33%
43%
What is the WEEE Regs 2013 concerned with?
The correct and safe disposal of many types of electrical items
The correct and safe disposal of many types of BSE items
The correct disposal of domestic electronics only
The correct disposal of industrial electronics only
JiT and BIM are often used to maximise a construction project's ability to achieve...
Passivhaus
Environmental law compliance
Lean construction
Listed Building Consent
A Ring Final Circuit is recommended to encompass a maximum floor space of...
50 m2
100 m2
150 m2
200 m2
Which type of Air Conditioning system is capable of supplying various rooms a different temperature according to demand?
Constant Air Volume (CAV) systems
Variable Air Volume (VAV) systems
Gas tightness testing is done using a...
Manometer
Barometer
Hydraulic tester
Gas Flue Analyser
A Thermocouple within a gas appliance carries a current of...
5 mV DC
10 mV DC
20 mV DC
100 mV DC
In large commercial heating systems, how is the risk of no heating or water pressure mitigated?
By installing multiple boilers and pumps to share the demand
By installing multiple Central Plant AC systems
By using Primary pumped and reverse return systems
By encouraging engineers to work late nights to keep an eye on things
In accordance with BS7671, what cable must be used for fire protection systems?
Twin and Earth
FP200
Heat-Resistant Flex
SWA
